In which year does a 2007 car require two inspections per year?

1 Answers
PaigeFitz
07/30/25 3:30am
By 2022, it will require two inspections per year. 1. Inspection regulations: According to regulations, family-use small cars with 7 seats or fewer (including 7 seats) are exempt from on-site inspections for the first 6 years from the date of purchase. However, it is necessary to collect the annual inspection sticker and environmental protection sticker from the vehicle management office every two years. After 6 years, an annual inspection is required, and for cars over 15 years old, two inspections per year are required. 2. Introduction to inspections: An inspection refers to giving the vehicle a physical examination, promptly eliminating potential safety hazards, and checking whether components such as the engine, brakes, and lights are functioning properly. The inspection requires the vehicle to be on-site for examination, with both the person and the vehicle needing to participate. The annual review, however, does not require the vehicle to be present. The owner needs to bring various materials such as the driving license to the vehicle management office for the annual review and to obtain the new inspection compliance label.
Was this review help?
7
2
Share
More Forum Discussions

What are the troubleshooting methods for manual transmissions?

Manual transmission troubleshooting methods include: 1. Inspect the gear shift lever and remote control mechanism linkage system; 2. Check for any deformation in the linkage, and whether there is interference or sticking in its movement; 3. Examine if the clearance at linkage connection points is excessive; 4. Verify if any connecting rods are loose. Common manual transmission faults are: 1. The gear lever automatically returns to the neutral position during acceleration, deceleration, climbing, or severe vibration; 2. Inability to engage or disengage gears when the clutch is fully disengaged; 3. Difficulty in smoothly shifting into gear; 4. Unusual noises such as dry grinding, impact, or vibration during operation.
5
1
Share

How to Adjust a Car Odometer?

Car odometer adjustment methods vary by type: 1. Mechanical type: Remove the instrument panel and manually rotate the mechanical gears; 2. LCD display type: Modify the corresponding mileage data in the microcontroller. The odometer consists of a speedometer and a mileage counter, located directly in front of the driver's position. Methods to identify actual mileage when purchasing a car include: 1. Check the vehicle's production date; 2. Examine tire wear patterns; 3. Inspect interior condition; 4. Listen for engine sounds; 5. Test drive performance. To read a car odometer: 1. The upper number displays total mileage; 2. The lower number shows trip mileage.
1
3
Share

What Causes Car Shaking and Lack of Power During Acceleration?

Car shaking and lack of power during acceleration can be caused by: 1. Poor fuel quality; 2. Cracked engine intake pipe; 3. Incorrect ignition timing; 4. Fuel injection system malfunction; 5. Faulty throttle position sensor; 6. Catalytic converter failure; 7. Spark plug issues; 8. Slow response from transmission computer. Solutions for car shaking and lack of power during acceleration include: 1. Replace engine intake pipe; 2. Adjust ignition timing; 3. Replace fuel injection system; 4. Replace throttle position sensor; 5. Inspect catalytic converter; 6. Use higher-grade fuel; 7. Replace spark plugs; 8. Replace transmission computer.
19
5
Share

What are the self-rescue methods when a motor vehicle accidentally falls into water?

Here is an introduction to the self-rescue methods when a motor vehicle accidentally falls into water: 1. When the vehicle door cannot be opened after the motor vehicle accidentally falls into water, the self-rescue method is to break the glass to allow water to enter the cabin. This balances the pressure inside and outside the cabin, making it easier to open the driver's door. Once the door is opened, you can enter the water and easily swim to the surface, avoiding danger. 2. When a motor vehicle accidentally falls into water, the water pressure is greater than the air pressure inside the cabin. Therefore, the driver's door cannot be opened. Only when the pressure inside and outside the cabin is equal can the door be opened. The only method at this time is to use a hammer to break the glass and allow water to enter. Hence, it is advisable to keep such tools handy in the cabin for emergencies.
9
1
Share

How Long is a Car Considered Stock?

6 months to 12 months or more is considered stock. Here are the methods to identify stock cars: 1. Check the production nameplate: The vehicle nameplate is located below the B-pillar on the right side of the vehicle, indicating the production date and engine parameter information; 2. Check the glass: The production date and year of the glass are marked on the car windows; 3. Check the tires: Determine the production time by the tire production date; 4. Check the engine compartment: Open the engine and inspect if the engine compartment is clean. Extended content: Potential issues with stock cars: 1. Various fluids, electronic components, batteries, rubber seals, and tires may experience moisture and aging due to prolonged storage without periodic inspection and maintenance; 2. Periodic inspection and maintenance measures are rarely performed.
19
2
Share

What Causes the Pulsating Sound When Opening the Rear Car Window?

This is caused by the resonance between the air vibration frequency after opening the window and the characteristic frequency of the car body. Closing the window can resolve the issue. Below are relevant explanations: 1. Car Windows: Car windows are an essential component of the entire vehicle body, designed to meet the needs of interior lighting, ventilation, and visibility for drivers and passengers. Windows are categorized by their installation positions: front and rear windshields, side windows, and door windows. The design, structure, and quality of the windows significantly impact the driver's visibility, passenger comfort, aesthetic appearance, and aerodynamic characteristics. 2. Resonance: Resonance is a frequently used technical term in physics, referring to a phenomenon where a physical system vibrates with greater amplitude at specific frequencies and wavelengths compared to others.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.