In which year did the BYD S6 use Mitsubishi engines?

1 Answers
DiLouis
07/30/25 10:50am
2012 BYD S6 used Mitsubishi engines. Here are the relevant details: 1. The BYD S6 is a mid-size SUV under BYD, with a wheelbase of 2720 mm, and dimensions of 4810 mm in length, 1855 mm in width, and 1680 mm in height. 2. The BYD S6 is equipped with three types of engines: a 1.5L turbocharged engine, a 2.0L naturally aspirated engine, and a 2.4L naturally aspirated engine. The BYD S6 offers good overall handling, a high seating position, excellent visibility, clear road feedback, a solid chassis, and decent stability. However, the steering wheel is somewhat heavy, the suspension is slightly stiff, tire noise is noticeable, and the engine power output is average, but it meets daily needs.
Was this review help?
6
1
Share
More Forum Discussions

How to switch Bluetooth audio on Haval H6?

Switch in menu mode. Below are the relevant details: 1. Body dimensions: The Haval H6 body dimensions are: length 4615mm, width 1860mm, height 1720mm. Taking the 2021 automatic champion edition Haval H6 as an example, it belongs to the compact SUV category with a wheelbase of 2680mm, fuel tank capacity of 58 liters, and curb weight of 1675kg. 2. Configuration: The 2021 automatic champion edition Haval H6 features MacPherson independent front suspension and double-wishbone independent rear suspension. It is equipped with a 1.5T turbocharged engine producing maximum power of 150PS (110kW) and maximum torque of 210Nm, paired with a 7-speed dual-clutch transmission.
15
3
Share

How to Turn On the Headlights of a Sylphy?

The method to turn on the headlights of a Sylphy involves the following steps: 1. There is a light lever on the right side of the steering wheel. 2. Rotate the light button to the 'off' or 'o' position. 3. The headlights can then be turned off or on. Additional information: 1. The lighting should provide good illumination while minimizing glare. For headlights, to meet both requirements, high beam and low beam settings are used. 2. The high beam is used for long-distance illumination when there are no oncoming vehicles or when not following other cars. It is produced by a more powerful main filament located at the focus of the reflector, with the beam direction approximately horizontal. It is usually stipulated that the maximum luminous intensity of a single light should not be less than 20,000 candelas. To ensure driving safety, the illumination distance of the high beam should be greater than the braking distance required for a timely stop.
13
4
Share

How to Prevent Turn Signal from Rebounding?

Preventing turn signal rebound can be achieved by: avoiding excessive steering wheel rotation. The sensing component is merely a fork mechanism, with another fork positioned adjacent to the steering column. The automatic reset function of turn signals relies on this small device. Turn signals serve as crucial indicator lights that activate during vehicle turns to alert surrounding vehicles and pedestrians. These signals utilize xenon tubes controlled by a microcontroller circuit, operating in alternating left-right flashes without interruption. Three primary types of flashers are employed for blinking: thermal, capacitor, and electronic. To initiate a left turn, manually push the lever downward. Upon completing the turn, when the driver returns the steering wheel rightward, the mechanism on the steering column will engage the fork, deactivating the left turn signal to achieve automatic reset. An audible 'click' during steering wheel return indicates successful lever reset. The automatic reset principle for right turns is identical, merely operating in the opposite direction.
6
1
Share

What Causes Body Shaking at High Speeds?

The reasons for body shaking at high speeds are as follows: 1. Misaligned positioning angles: The front wheel positioning angles are misaligned, with excessive toe-in. 2. Wheel issues: Low front tire pressure, deformed front wheel spokes, incorrect number of tire bolts, or tire imbalance due to repairs. 3. Drivetrain faults: Loose installation of drivetrain components, bent drive shaft, power imbalance, or deformed front axle. 4. Damaged shock absorbers: Inconsistent stiffness of the front leaf springs, causing vibration at higher speeds and steering wheel shaking. To diagnose, lift the drive axle, secure the front wheels with safety blocks, start the engine, and gradually shift into higher gears until the drive wheels reach the test vibration speed. If both the body and steering wheel shake, the vibration is drivetrain-related.
14
1
Share

What to Do When the Car Battery Is Completely Dead?

When the car battery is dead, the only solution is to jump-start it using another battery. Connect the positive terminal of the other car's battery to the positive terminal of your car's battery, and then connect the negative terminal to the negative terminal. Here are the detailed steps: 1. If the battery suddenly dies, contact a rescue vehicle and connect jumper cables to temporarily charge the battery and start the engine. To avoid being unable to charge when the battery is dead, it is advisable to keep a set of jumper cables in the car. 2. When connecting the jumper cables, be very careful not to reverse the order: first connect the positive terminal of the dead battery to the positive terminal of the rescue vehicle's battery, then connect the negative terminal of the rescue vehicle's battery to a metal part in the engine compartment of the dead car (grounding). 3. After connecting the jumper cables, start the rescue vehicle's engine and slightly increase the RPM. After about 5 minutes, the dead battery will receive an emergency charge. Once charging is complete, remove the jumper cables in the reverse order of connection.
14
4
Share

What grade of engine oil does the RAV4 use?

RAV4 uses 5W40 full synthetic engine oil or 5W30 semi-synthetic engine oil, with a replacement capacity of 4L and a replacement interval of 5000 kilometers. Engine oil, also known as engine lubricant, serves multiple functions including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption and buffering. The RAV4 is the base model in Toyota's compact multi-purpose off-road vehicle family, with body dimensions of 4630mm in length, 1855mm in width, and 1685mm in height, a wheelbase of 2660mm, and a body weight of 1420kg. The RAV4 is available in both 3-door and 5-door models, featuring an intake port and front and rear bumpers that emphasize its off-road feel, along with enlarged headlights and a more prominent Toyota logo. Thanks to an 80mm increase in wheelbase and enhanced interior height and width, the RAV4 offers spacious and comfortable seating.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.