In which year did China's National IV emission standard come into effect?

2 Answers
ParkerRose
08/27/25 5:25am
China's National IV emission standard was implemented in 2011 and remained in effect until the introduction of the National V standard in 2018. Therefore, vehicles produced between 2011 and 2017 comply with the National IV standard. The National IV standard requires a reduction of approximately 50% in various pollutant emissions compared to the National III standard. Here are some relevant details: 1. National IV Standard: The National IV emission standard is the fourth stage of China's motor vehicle pollutant emission standards. The main pollutants from vehicle emissions include HC (hydrocarbons), NOx (nitrogen oxides), CO (carbon monoxide), and PM (particulate matter). The standard aims to control and reduce these emissions below specified limits through technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices. 2. Reference for Emission Standards: The frequent updates to emission standards are due to the increasing number of vehicles, which has led to worsening environmental pollution from vehicle exhaust. Vehicle exhaust contains harmful gases such as carbon monoxide and hydrocarbons, and the emission standards set limits on the discharge of these gases. China's emission standards are primarily based on European Union standards, with some adaptive modifications made to suit local conditions.
Was this review help?
14
5
Share
RuthFitz
09/09/25 4:24am
I remember the China IV emission standards were fully implemented starting from 2011, specifically taking effect on July 1st of that year. Having driven older vehicles before, the pollution under the China III standards was severe, making hazy days particularly uncomfortable. When the new regulations came into effect in 2011, all new vehicles had to meet stricter standards, such as being equipped with better three-way catalytic converters, which significantly reduced harmful gas emissions. As a veteran driver with decades of experience, I've witnessed the improvement in air quality. From that year onward, annual vehicle inspections also placed greater emphasis on emission testing, requiring annual checks of the OBD system to ensure compliance. Although heavy-duty vehicles didn't follow suit until 2013, 2011 marked a critical turning point for light-duty vehicles, driving automotive manufacturers to innovate. Nowadays, checking the emission label has become a common practice when purchasing cars. After implementation, cities saw more blue skies, making daily commutes much more reassuring.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

Can I get a driver's license with 500-degree myopia?

When applying for a driver's license, the main focus is on your corrected vision. As long as your corrected vision reaches 4.9, you are eligible. Here is relevant information about the driver's license test: 1. Introduction: The driver's test is a qualification examination organized by the Vehicle Management Office of the Public Security Bureau. Only by passing the driver's test can you obtain a driver's license and legally drive motor vehicles. 2. Content: The test for motor vehicle drivers is divided into three parts: the road traffic safety laws, regulations, and related knowledge test (also known as the "theory test", referred to as "Subject 1"), the field driving skills test (commonly known as the "parking test", referred to as "Subject 2"), and the road driving skills and safe civilized driving common sense test (commonly known as the "road test", referred to as "Subject 3"). The test content and passing standards are unified nationwide, with corresponding test items specified according to different types of vehicles.
2
3
Share

What Causes Severe Jerking During Audi A6 Acceleration Without Fault Codes?

Audi A6 experiencing severe jerking during acceleration without fault codes is primarily caused by transmission gear programming issues, internal contamination/impurities in the transmission, or poor transmission cooling. When the Audi A6's transmission operates at abnormally high temperatures, it affects transmission fluid performance. If temperatures exceed 120°C, the rubber sealing materials harden, leading to fluid leaks that impact oil pressure and cause jerking. Prompt maintenance inspection is recommended. Additional information: 1. Generally, car jerking occurs due to mismatched engine speed and clutch plate rotation. 2. Frequent gear shifts between 1st and 2nd at low speeds, combined with repeated clutch engagement/disengagement, creates temporary power transmission interruptions - manifesting as common low-speed jerking during startup and acceleration. 3. Normally, turbocharger engagement at low RPMs affects engine rotation speed.
8
1
Share

Has the biannual inspection for 15-year-old vehicles been canceled?

The biannual inspection for 15-year-old vehicles has not been canceled. According to China's vehicle inspection regulations, non-commercial vehicles with 6 seats or fewer are exempt from inspection for the first 6 years, require annual inspection from 6 to 15 years, and biannual inspection after 15 years. Currently, vehicles are no longer subject to mandatory scrapping, so as long as the emission standards are met, the vehicle can legally operate on the road. Vehicles requiring biannual inspection include: commercial passenger vehicles over 5 years old, inspected every 6 months; trucks and large or medium-sized non-commercial passenger vehicles over 10 years old, inspected every 6 months; small and mini non-commercial passenger vehicles over 15 years old, inspected every 6 months. Vehicle inspection considerations: Before the inspection, prepare the necessary materials, including the handler's ID card, the valid compulsory traffic insurance policy for the vehicle (valid copy, original, electronic policy, or a duplicate with the insurance company's red stamp, which must include the vehicle and vessel tax), and the vehicle's registration certificate.
15
3
Share

What are the speed limits for urban roads with and without center lines?

Urban roads with center lines have a speed limit of 40 kilometers per hour, while those without center lines have a speed limit of 30 kilometers per hour. Below are detailed introductions to the hazards of speeding: 1. Impact on vehicle operating conditions: Long-term speeding can easily worsen the vehicle's operating condition and increase the probability of failures in functions such as tires, braking systems, and steering systems. Without regular maintenance, it can easily lead to traffic accidents. 2. Increased risk of losing control and overturning during turns: Generally, speeding vehicles are in a state of changing lanes or overtaking. Each time a vehicle overtakes, it creates an intersection point with surrounding vehicles, increasing safety hazards. Additionally, there is a higher risk of losing control and overturning during turns.
15
5
Share

What Kind of Driver's License is Required for a 13-Seater Vehicle?

13-seater ordinary medium-sized buses require a B1, A2, or A1 driver's license to operate. 13-seater yellow-plate vehicles require a B1 license to drive. Below is additional information: 1. Yellow-plate vehicles: Yellow-plate vehicles typically refer to large vehicles, such as trucks over 2 tons or buses. Most commercially operated vehicles and motorcycles also have yellow license plates. A 7-seater yellow-plate vehicle requires the driver to hold a B1 driver's license. 2. Permitted vehicle types for a B1 license: The B1 license allows the operation of medium-sized buses, defined as vehicles not exceeding 6 meters in length, with a certified passenger capacity of 10 (inclusive) to 19 (inclusive) passengers.
11
3
Share

Can You Still Drive When 4WD Overheating Temporarily Fails?

4wd overheating car should not be driven, and the fault should be eliminated as soon as possible to solve the problem. Here is the relevant information: 1. 4WD overheating temporarily fails: When the car displays "4WD overheating temporarily fails," it means that the electronic coupler of the four-wheel drive transmission has overheated and triggered an alarm, which is why this prompt appears on the car's dashboard. Generally, the car's computer is used to control and cut off the power supply to the electronic coupler. 2. Four-wheel drive system: The four-wheel drive system (4WD system) changes the engine's driving force from the two-wheel drive of the 2WD system to four-wheel drive. The reason why the 4WD system is classified as an active safety system is mainly because the 4WD system has better engine driving force application efficiency than the 2WD system, achieving more effective tire traction and steering force.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.