In which city is the Brilliance BMW factory located?

What is the 0-100 km/h acceleration time for the hybrid version of the Accord?

The hybrid Accord has a 0-100 km/h acceleration time of approximately 7.5 seconds. The Accord is a mid-size car under Honda. Taking the Accord 2018 Hybrid 2.0L Rui Cool Edition China VI as an example: the body structure is a 4-door, 5-seater sedan, with exterior dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, a wheelbase of 2830mm, a fuel tank capacity of 48.5 liters, and a trunk capacity of 574 liters. The Accord 2018 Hybrid 2.0L Rui Cool Edition China VI is equipped with a 2.0L 146-horsepower L4 naturally aspirated engine and an E-CVT continuously variable transmission, with a maximum power of 107 kW and a maximum torque of 175 Nm.

9

4

Share

How Long Does It Take to Receive Vehicle Scrappage Compensation?

Vehicle scrappage compensation is generally disbursed within half a month. According to regulations: government subsidies are provided to owners who eliminate (transfer out of the city or scrap in advance) old motor vehicles, with a focus on eliminating vehicles that meet National Phase I and National Phase II emission standards. Below are relevant considerations: 1. Owners scrapping old motor vehicles: Owners must submit an application for government subsidies for scrapping old motor vehicles to the transaction processing platform. 2. Owners applying for government subsidies through the transaction processing platform with relevant materials: After approval, the municipal finance department will transfer the government subsidy funds to a corporate bank account opened in the owner's name or a personal designated bank current savings account. 3. Owners who have scrapped old motor vehicles and received government subsidies: If they purchase a new vehicle separately, they will no longer be eligible for corporate rewards, and the transaction processing platform will not accept any other applications from the owner.

16

1

Share

Can You Be Fined for Parking on the Roadside with Hazard Lights On?

Parking on the roadside with hazard lights on can result in a fine. Turning on hazard lights does not allow you to park illegally at will, and improper use of hazard lights may also be captured by traffic cameras, which is a serious traffic violation. Always park according to regulations, avoid attempting shortcuts, and pay attention to traffic rules for safe driving. 1. Hazard Lights: Hazard lights are also known as emergency flashers, commonly referred to as "double flashers." The hazard light button is located in the middle of the dashboard, marked with a red triangle. Pressing it causes all four turn signals to flash simultaneously, indicating a warning to other drivers. 2. Usage Scenarios: On highways, if you need to pull over due to a breakdown, turn on hazard lights to alert vehicles behind you; they can also be used when your car is being towed; if your car breaks down on the road, turn on hazard lights to warn approaching vehicles to slow down and proceed with caution.

9

0

Share

How to Adjust Low Beam Headlights That Illuminate Too Close?

The key points for adjusting low beam headlights are as follows: 1. Adjust facing a wall: Position the car perpendicular to a wall, approximately 10 meters away. 2. Use high beams for adjustment: Generally, if the high beams are properly adjusted, the low beams will also be correct. It's advisable not to adjust using low beams alone as it's harder to determine if the high beams are properly aligned. 3. Adjust one at a time: Cover the light not being adjusted with a cloth and adjust them one by one. Below are precautions for adjusting low beam headlights: 1. Adjusting height: If the headlights haven't been replaced, usually only height adjustment is needed, as the left-right alignment is typically accurate. 2. Adjusting headlights: Note that the left headlight (from the driver's perspective) should be slightly lower than the right one to avoid dazzling oncoming vehicles, which could compromise safety. 3. Nighttime adjustment: It's best to adjust at night, but avoid doing so on roads due to safety concerns and poor visibility of the adjustment effects. Opt for a residential area or a courtyard instead. Prepare a flashlight as it's hard to see clearly at night.

4

2

Share

What is the difference between 2 valves and 4 valves per cylinder?

2 valves refer to an engine with one intake and one exhaust valve, totaling 2 valves, while 4 valves refer to an engine with two intake and two exhaust valves, totaling 4 valves. 2-valve engines are mostly used in small-displacement, low-speed engines, whereas 4-valve engines are commonly found in large-displacement, high-speed engines. These differences lie in the valve train mechanisms of the engines, but the principles remain the same. Here is some additional information: 1. Valves: Valves refer to the intake and exhaust valves of a cylinder. The intake valve is directly connected to the intake manifold and serves as the entry point for the engine to draw in the air-fuel mixture (or fresh air). The exhaust valve is connected to the exhaust manifold and serves as the exit for the engine to expel combustion waste gases. 2. Function: Valves are specifically responsible for introducing air into the engine and expelling the post-combustion exhaust gases. Structurally, they are divided into intake and exhaust valves. The intake valve's role is to draw air into the engine to mix with fuel for combustion, while the exhaust valve's role is to expel the post-combustion waste gases and dissipate heat.

13

4

Share

How to Align with the Ground Arrows in Subject 2?

Steering wheel alignment with the arrow is a crucial reference point for the uphill section in Subject 2. If the arrow is directly in the middle of your body, it indicates that the steering wheel is aligned with the arrow. Below are techniques for aligning with the central guide arrow on the slope: 1. Align the side line: Position the left wiper's rivet to coincide with the right ground edge line, ensuring the right side of the vehicle is approximately 30 cm from the road edge. Alternatively, align the right one-third of the car hood with the road edge line, maintaining the same 30 cm distance. Continuously adjust the steering wheel to meet one of these conditions while driving. 4. Approach the stop line: As you near the stop line, observe when the lower edge of the left rearview mirror aligns with the second thick yellow solid line, then simultaneously press the clutch and brake to stop the vehicle and engage the handbrake. 5. Start upon voice command: Within 30 seconds of hearing the start command, complete the starting procedure. Gradually release the clutch until noticeable vehicle vibration is felt, then stabilize the clutch, quickly release the handbrake, and slowly release the brake to allow the vehicle to move forward steadily.

3

1

Share

In which city is the Brilliance BMW factory located?

What is the 0-100 km/h acceleration time for the hybrid version of the Accord?

How Long Does It Take to Receive Vehicle Scrappage Compensation?

Can You Be Fined for Parking on the Roadside with Hazard Lights On?

How to Adjust Low Beam Headlights That Illuminate Too Close?

What is the difference between 2 valves and 4 valves per cylinder?

How to Align with the Ground Arrows in Subject 2?

Are 4S Stores Owned by Individuals or Manufacturers?

Where is the air conditioning filter of the Shuai Ke located?

How to Open the Fuel Tank Cap on a Changan Vehicle?

What kind of oil should be used for squeaky car doors?