In-depth Analysis: What are the Differences Between the Prado and Land Cruiser?

What does BND mean in cars?

BND in cars refers to the radio band switch button. Pressing this button allows you to select between 3 FM or 2 AM band radio stations. Below is a detailed introduction to the car radio: 1. Player buttons: The buttons on the car music player, such as PWR, MUT, AMS, LOU, and SEL/AF, are indicators for the car audio system. PWR: Press this button to turn on the device (any button on the panel can turn it on). Hold this button for more than 1 second to turn it off. MUT: Press this button to mute the playback. AMS: In radio mode, hold this button for more than 2 seconds to automatically save the received station to preset stations 1-6. A short press cycles through preset stations [1-6], each staying for 5 seconds. In MP3 mode, pressing this button selects the MP3 menu. LOU: Enhances low-frequency loudness. SEL/AF: Selects AM or FM bands. 2. Usage precautions: The player's input voltage is generally +12V. Excessive voltage can damage the player, while insufficient voltage will prevent it from functioning properly. Normally, insert the USB flash drive into the player first, then plug the player into the car's cigarette lighter socket.

16

5

Share

How to Pair a Car Key?

Keep the engine running, use another original car key to lock the car, hold it in the locked position, and simultaneously press and hold the lock button on the remote to be matched for five seconds. Turn the key inside the door lock to the unlock position in reverse and hold it, then press the unlock button on the remote to be matched. A sound will indicate that the remote is recognized.

2

0

Share

How to Remove the Spare Tire of a Land Cruiser?

Open the rear door and lift the horizontal floor panel. The spare tire bolt is located slightly to the right, covered by a plastic cap about the size of a ping pong ball—remove this cap. Fit the bolt socket onto the bolt head and turn the handle counterclockwise; the spare tire will lower to the ground. At the center of the spare tire, rotate the hook sideways and remove it. Then, take off the plastic cover of the spare tire.

2

4

Share

How many kilometers can a Honda Accord travel on a full tank of gas?

Honda Accord's fuel consumption is: 7.6-8.8L/km, and the fuel tank capacity is: 65L. A full tank can approximately travel 860 kilometers. The Accord is a brand under GAC Honda, featuring direct injection, Atkinson cycle with VTC (Variable Timing Control), and incorporates an EGR (Exhaust Gas Recirculation) system. It utilizes i-VTEC and an intelligent power management system that can automatically switch between 3-cylinder and 6-cylinder operation modes based on actual road conditions. Methods to improve fuel efficiency are as follows: 1. Maintain a steady speed: Control your speed while driving and avoid sudden braking; 2. Avoid opening windows at high speeds: Driving with windows open at higher speeds increases fuel consumption; 3. Regularly check tire pressure to ensure correct inflation: Both under-inflated and over-inflated tires can increase fuel consumption, so it's necessary to check tire pressure regularly; 4. Pay attention to transmission maintenance: Always use the correct transmission fluid specified for your vehicle. Transmission fluid not only lubricates but also plays a role in torque transmission, so it should be replaced periodically.

12

4

Share

What are the symptoms of a faulty high-pressure fuel pump in the Magotan?

High-pressure fuel pump failure conditions: 1. Inability to reduce speed: Pseudo-runaway refers to the diesel engine starting with normal idle speed, but failing to decelerate after releasing the throttle when accelerated to high speed. This occurs when the injector plunger wears out, causing the fuel rack to remain at the idle fuel quantity position. Once the throttle is released after acceleration, the fuel rack can return to the idle position, but the governor's moving parts and transmission components, due to excessive wear, get stuck in the high-speed position, preventing speed reduction. If this phenomenon occurs, the fuel injection pump must be inspected and repaired. 2. Fuel rack stuck in the no-fuel position: If no fuel comes out of the high-pressure fuel line, but there is fuel in the low-pressure circuit, and the diesel engine fails to start, it indicates that the fuel rack is stuck in the no-fuel position. In this case, the fuel injection pump also needs immediate inspection and repair. 3. Fluctuating speed: This is a sign that the fuel rack is not moving smoothly or that the internal components of the governor are excessively worn, leading to increased clearance. Therefore, the fuel injection pump also requires inspection and repair.

15

0

Share

What causes air leakage in the handbrake chamber?

Continuous air leakage from the exhaust port of the handbrake valve is caused by poor sealing between the intake valve and its seat. This can be resolved by replacing the intake valve seal using a repair kit. Damage or scoring to the piston seal ring of the spring brake chamber, or scoring on the chamber cylinder wall, can all lead to air leakage in the chamber. When the vehicle is in parking brake mode, air leakage from the relay valve will not cause any malfunction to the vehicle, as this is clearly the intake of the brake valve.

4

2

Share

In-depth Analysis: What are the Differences Between the Prado and Land Cruiser?

What does BND mean in cars?

How to Pair a Car Key?

How to Remove the Spare Tire of a Land Cruiser?

How many kilometers can a Honda Accord travel on a full tank of gas?

What are the symptoms of a faulty high-pressure fuel pump in the Magotan?

What causes air leakage in the handbrake chamber?

How many kilometers can a 2.0T engine run on one liter of fuel?

How is engine oil extracted?

What are the manifestations of a damaged BYD electro-hydraulic module?

How to align the flat-head A2 vehicle on a single-plank bridge?