···
Log in / Register

Impact of High Oil Viscosity on Vehicles

1Answers
LeoDella
07/29/2025, 03:46:20 PM

Here is a related introduction to the impact of high oil viscosity on vehicles: 1. The effect of oil viscosity on the engine: The primary function of oil is to reduce engine friction. For engines with high torque and high speed, high-viscosity oil allows the engine to operate smoothly. However, for engines with low speed and low torque, high-viscosity oil can easily become a burden, not only failing to reduce engine friction but also likely increasing friction resistance. 2. Different oils for different seasons: High-viscosity oil is suitable for summer but must not be used in winter. Because the oil viscosity is already high in cold weather, the oil pump may struggle to draw oil through the filter screen of the oil pan during cold starts. Therefore, it is crucial not to use high-viscosity oil in winter and to choose the appropriate oil wisely.

Was this review help?
110
Share
More Q&A

Is the Geely Vision X3 noisy when running?

When the car engine is working, it will vibrate and be accompanied by slight abnormal noises. Reasons for increased noise: Engine mounts are rubber blocks between the engine and the frame. Solution: Tighten or replace the engine mounts. Improper use of engine oil: If the viscosity of the engine oil does not match the engine, it can easily cause carbon buildup, leading to increased engine noise. Solution: Use the engine oil grade specified in the vehicle manual and avoid mixing different brands of engine oil. Engine misfire: An engine misfire mainly refers to one or more cylinders not working properly. Solution: Check the working condition of each ignition coil and cylinder spark plug.
107
Share

Why does the Geely ESC warning light stay on and the car won't start?

ESC warning light illumination indicates a malfunction in the vehicle's ESC system, during which the electronic stability control system is not operational. The ESC warning light may be triggered by software system alerts, sensor failures, wiring short circuits, or even false alarms. It is necessary to visit a 4S dealership for specialized diagnostic equipment to perform troubleshooting and repairs. Introduction to ESC warning light: ESC stands for Electronic-Stability-Controller, which translates to Electronic Stability Control system for vehicle body. Main functions of ESC: The primary function of ESC is to provide enhanced stability and safety when the vehicle changes lanes or negotiates curves. Under normal driving conditions, the ESC system remains inactive. When the ignition is turned on, ESC activates, the warning light illuminates, and the ESC off indicator light comes on for approximately 4 seconds before turning off. When the ESC warning light remains constantly lit, it signifies a malfunction in the vehicle's ESC system, and the electronic stability control system ceases to function.
104
Share

What is the difference between Shell Helix Ultra and Shell Helix?

The longevity of the two Shell engine oils is different: The longevity of the two Shell engine oils differs. The Shell Helix Ultra series of motor oil performs better in terms of longevity compared to Shell Helix oil. The wear resistance of the two Shell engine oils is different: The Shell Helix Ultra series of oil has better wear resistance compared to Shell Helix oil. The wear resistance of Shell Helix oil is not as good as that of Helix Ultra, so the two oils differ in wear resistance performance. The lubrication effects of the two Shell engine oils are different: Shell Helix Ultra oil provides better lubrication for the engine, while the lubrication coefficient of Shell Helix oil is not as strong as that of Helix Ultra.
105
Share

What is the fuel consumption of the Borgward BX7 2.0T?

The actual measured average fuel consumption of the Borgward BX7 2.0T is 11.08L per 100 kilometers. Borgward BX7 powertrain configuration The Borgward BX7 is equipped with a 2.0T four-cylinder turbocharged engine, which has a maximum output power of 165kW and a peak torque of 300N·m. The transmission is paired with a 6-speed automatic manual transmission. The Borgward BX7 features a powertrain combination of 2.0T + 6AT. Factors affecting fuel consumption: Various factors influence fuel consumption, but the decisive factor is the powertrain configuration. Other influencing factors include driving habits: rapid acceleration and sudden braking; tire pressure; carbon deposits in the cylinders; worn spark plugs affecting ignition frequency and strength; fuel quality; and the use of air conditioning.
115
Share

What does the Enclave code89 fault code mean?

Enclave code89 fault code indicates a lack of coolant in the engine cooling system, and it is necessary to add coolant. The role of coolant: Most cars use water-cooled engines, which rely on coolant for heat dissipation. The coolant circulates in the engine through two paths: a major cycle and a minor cycle. When the engine is first started, the coolant performs a minor cycle, during which it does not pass through the radiator, allowing the engine to warm up quickly. Once the engine reaches its normal operating temperature, the coolant switches to a major cycle, passing through the radiator to dissipate heat and maintain the engine within the optimal temperature range. Precautions for replacing coolant: Replace the coolant regularly and ensure that the old coolant is completely drained from the cooling system.
113
Share

Where is the oil pressure regulating valve located on the BMW 3 Series?

BMW 3 Series oil pressure regulating valve is located at the oil pump connection. Function of the oil pressure regulating valve: The oil pressure regulating valve is primarily used in the engine's lubrication system to regulate oil pressure levels and limit the lubrication system. If damaged, it can trigger a low oil pressure warning. Causes of fluctuating oil pressure: Faulty oil pump or air intake by the oil pump; foreign objects jamming the regulating valve or return valve spring, or a bent spring rubbing against the seat hole, hindering spring movement and making it difficult for the ball valve to open and close; insufficient oil in the oil pan, with the oil level at the limit of the oil strainer's suction port, or impurities in the oil line partially blocking it, causing intermittent oil suction by the pump and resulting in fluctuating oil pressure.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.