How to Write China National Standards I, II, III, IV, V, and VI for Automobiles?

2 Answers
LaFelicity
08/27/25 6:24am
National I, National II, National III, National IV, National V, National VI. The following is related content about automobile emission standards: 1. Introduction: Automobiles are a mobile source of pollution, emitting major pollutants such as carbon monoxide (CO), hydrocarbons (HC), nitrogen oxides (NOx), and particulate matter (PM), all of which are substances that pollute the environment and need to be controlled. The sources of automobile pollutant emissions come from the exhaust pipe, crankcase, and fuel. 2. Establishment: Automobile emission standards are formulated to control the emission of automobile pollutants. To curb the generation of these harmful gases and encourage automobile manufacturers to improve their products to reduce the source of these harmful gases, both Europe and the United States have established relevant automobile emission standards. Automobile emission standards are continuously supplemented, refined, and tightened with the increase in automobile ownership and the worsening of the human environment.
Was this review help?
2
1
Share
LaWilliam
09/09/25 5:16am
When encountering issues related to Chinese automotive national standards, from an experienced driver's perspective, those 'one, two, three, four, five, six' typically refer to the serial numbers of different standards. In actual writing, they should be expressed as Arabic numerals 123456, prefixed with GB or GB/T to indicate national standards. For example, the format GB/T 18344 represents automotive maintenance standards, followed by the year such as the 2020 version. This writing method is quite common in the industry, ensuring safety and standardization. Writing the wrong Chinese characters might mislead mechanics. I believe car owners should learn more about these basics, as national standards are crucial to vehicle performance and safe driving. When repairing cars or checking information, I always memorize the numerical codes directly—simple and efficient. This avoids confusion and allows for quick reference to information.
Was this review help?
10
5
Share
Expand All
More Forum Discussions

Is H11 a Low Beam or High Beam?

H11 is a single-filament headlight bulb, which inherently does not distinguish between high and low beams; if the bulb serves as either a high beam or low beam in an H11 configuration, it can be directly replaced when changing the bulb. Here is a partial introduction about high and low beams: 1. Both high and low beams are used to illuminate the road ahead of the vehicle. The difference between them lies in the distance they cover—one illuminates a shorter distance, while the other covers a longer distance. 2. Typically, low beams have an illumination range of about 30-40 meters with a coverage angle of approximately 160°; high beams, on the other hand, have more concentrated light with a brighter spot, allowing them to reach higher and farther distances.
16
3
Share

Can I Get an Assessment at a 4S Shop Without Repairing?

You can get an assessment at a 4S shop without repairing. Below is the detailed process for car insurance claims: 1. Report the Incident: Promptly call the national unified customer hotline for car insurance to report the incident, such as "Pacific Insurance" at 95500, "Taiping Insurance" at 95589, or "Ping An Auto Insurance" via the "Ping An Good Driver" app for online reporting. Insurance regulations stipulate that the policyholder must report the incident within 48 hours of its occurrence. If reported after 48 hours and the policyholder cannot provide relevant incident proof, making it impossible for the insurer to verify the incident's authenticity and the extent of the loss, the insurer reserves the right to deny the claim. 2. On-site Inspection: Upon receiving the report, the insurance company will arrange for an inspector to assist with on-site handling. The inspector will then indicate which claim materials are required, and these materials must be submitted to the insurer promptly after the incident is resolved. 3. Assessment: The assessor will evaluate the vehicle's damage and issue an assessment form. If the policyholder agrees with the amount on the assessment form and has no objections, they can sign to initiate the claim. If the policyholder believes the insurer's assessment is unreasonable, they should refuse to sign the assessment form. 4. Submit Claim Materials and Review: After the incident is resolved, submit the claim materials as required by the insurer. Upon receiving the materials, the insurer will complete the approval process as quickly as possible and notify the policyholder of the result. The review time depends on the claim amount; larger claims will take longer to review.
7
0
Share

What does the cruise control lim mean?

"LIM" is the speed limit function button, which means that after activating this function, the maximum speed can only reach the set limit speed, and even if you press the accelerator further, the speed will not increase. Here are some introductions about LIM (speed limit function): 1. LIM is different from cruise control. Cruise control maintains the speed, eliminating the need for the driver to press the accelerator pedal for a long time, allowing the driver to rest; while the speed limit function only limits the maximum speed of the car, and the accelerator still needs to be pressed by the driver. 2. When the accelerator depth is below 95%, the speed will not exceed the set speed, and the vehicle will alarm when reaching the set speed.
11
2
Share

How to Open the Door When the Camry Key is Locked Inside the Car?

Here are the solutions for when the Camry key is locked inside the car: 1. If the main key is accidentally locked inside the car, try to retrieve the spare key and use it to open the door. 2. Some cars have a button near the trunk area. As long as the car key is within 1 meter of the trunk, you can easily open it. 3. Use a thin string to unlock the car door's safety switch: Thread a thin string through the gap of the car door, with a retractable buckle tied at the front. When the buckle hooks onto the safety switch of the car lock, pull it upward forcefully to unlock the safety switch, thereby opening the car door.
13
5
Share

What does it mean to check the smart key start system?

Checking the smart key start system refers to the vehicle detecting issues with the smart key start system, which may be caused by system malfunctions, receiver trigger device failures, and other problems. The following describes the functions of the start system: 1. The start switch activates the starter electromagnetic switch circuit to power the electromagnetic switch; in gasoline engines, the start switch is combined with the ignition switch. 2. The start relay controls the on/off of the starter electromagnetic switch circuit through its contacts (normally open type). The start switch only controls the start relay coil circuit, thereby protecting the start switch. There are single-type (protecting the start switch) and compound-type (protecting both the start switch and the starter).
10
4
Share

How to Activate One-Touch Window Control in Mazda?

Mazda's one-touch window control buttons are located on the driver's door armrest. Below are the detailed activation methods: 1. Opening the Window (One-Touch Down) (1) Press the switch to the first position and hold until the window moves to the desired position. (2) Press slightly harder to the second position, and the window will automatically descend. 2. Closing the Window (One-Touch Up) (1) Lift the button to the first position (applying excessive force will reach the second position), and release once the window reaches the desired position. (2) Briefly pull the switch to the second position to automatically close the window.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.