How to Write a Vehicle Certificate?

Can people with mild color weakness get a driver's license?

People with mild color weakness can get a driver's license, as staff point out that as long as they can distinguish traffic lights. According to regulations, applying for a driver's license requires "naked eye vision or corrected vision of both eyes to reach 4.9 or above. Essential conditions for obtaining a driver's license: Physical conditions: For large buses, tractors, large trucks, city buses, and trolleybuses, the height must be 155cm or above; for medium-sized buses, it must be 150cm or above. Naked eye vision or corrected vision of both eyes must be 5.0 and 4.9 or above, not red-green color blind, able to distinguish the direction of sound sources at 50cm from a tuning fork for each ear, with both thumbs intact, and at least three other fingers intact on each hand, normal motor function of upper and lower limbs, and no movement disorders in the trunk or neck. Age conditions: For small cars, small automatic transmission cars, and light motorcycles, the age must be between 18 and 70 years old. For low-speed trucks, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery, the age must be between 18 and 60 years old. For city buses, medium-sized buses, large trucks, trolleybuses, or trams, the age must be between 21 and 50 years old.

16

3

Share

How Often Should a Fuel-Powered Car Be Charged?

If the car is not driven, charge it once every half month. People can stay in the car while charging an electric vehicle. Below is relevant information: 1. Electric vehicle charging methods: There are three types of charging methods for electric vehicles: portable charging box, AC charging pile, and DC charging pile. The portable charging box is simple and portable, but it has the lowest power among the three types of charging equipment, resulting in slower charging. The AC charging pile offers moderate charging speed and is suitable for home use, especially for the daytime driving and nighttime charging model. The DC charging pile is the most powerful type of charging equipment, with power ranging from tens of kW to over a hundred kW, thus requiring higher grid power and enabling faster charging. The DC charging pile connects to three-phase AC power, converting it into DC power to directly charge the high-voltage DC power battery of the electric vehicle. The higher the power of the DC charging pile, the faster the charging speed. 2. Electric vehicle charging precautions: Electric vehicle charging precautions include mastering the correct charging time; avoiding overcharging or over-discharging the battery; turning off the vehicle's power supply while charging; and preventing the charging plug from overheating. Pure electric vehicles take longer to replenish energy. Taking a typical sports model as an example, if a home charging pile is used, it takes nearly 8 hours to fully charge, while a fast charging pile takes about 40 minutes to charge up to 80%. Develop a habit of frequent charging and avoid waiting until the battery is too low. Both overcharging and over-discharging reduce the battery's lifespan. Any product using a battery should avoid "over-discharging," and pure electric vehicles are no exception. When charging the car, always turn off electrical devices such as the audio system and air conditioning, as simultaneous charging and power consumption accelerate battery wear and cause overheating. Loose 220V power plugs or charger output plugs, as well as oxidized contact surfaces, can cause the plug to overheat. Prolonged overheating may lead to short circuits or poor contact, damaging the charger and battery and causing unnecessary losses.

6

2

Share

What is the fuel consumption of the BJ80?

Beijing BJ80 fuel consumption is 14.18 liters per 100 kilometers. Here are specific methods to reduce fuel consumption: 1. The vehicle consumes the most fuel during low-speed acceleration, so gently pressing the throttle during startup and preventing excessively high RPM can effectively reduce fuel consumption. 2. Avoid unnecessary high RPM as much as possible, as fluctuating engine speed will also significantly increase fuel consumption. 3. Regular maintenance, including oil changes and carbon deposit removal. 4. Try to avoid emergency braking; anticipating road conditions in advance not only improves driving safety but also saves fuel, such as gradually slowing down before traffic lights and utilizing inertia to coast.

13

2

Share

Will the car be damaged if the gears grind when shifting?

Grinding gears when shifting can damage the car. Relevant information is as follows: 1. Principle: It can cause severe wear to the gears inside the transmission, making it impossible to shift gears or engage them properly, thus preventing the vehicle from operating normally. 2. Cause: Grinding gears when shifting indicates a fault in the vehicle's clutch system. It could be due to a malfunctioning release bearing in the clutch system, leading to incomplete clutch disengagement, which causes the gears to grind when shifting. Alternatively, it might be caused by a faulty pressure plate in the clutch system, also resulting in incomplete clutch disengagement and gear grinding when shifting.

17

4

Share

Can You Drive with a Deformed Tire?

Tire deformation is not safe to drive with, and it is recommended to replace the tire immediately. Otherwise, it may lead to issues such as driving deviation, wheel vibration, and abnormal wear. Tires are circular elastic rubber products mounted on various vehicles or machinery for rolling contact with the ground. During driving, they endure various deformations, loads, forces, and high and low-temperature effects. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning properties. Automobile tires are one of the critical components of a vehicle, directly in contact with the road surface. Together with the vehicle suspension, they help absorb shocks encountered during driving, ensuring good ride comfort and smooth driving. They also ensure excellent adhesion between the wheels and the road surface, thereby improving the vehicle's traction, braking, and off-road capability.

8

3

Share

What does auto shutdown mean in a dash cam?

A dash cam's auto shutdown refers to the function of automatically saving videos and shutting down after the vehicle is parked and turned off. A dash cam is a device that records images, sounds, and other relevant information during vehicle operation. After installation, it can capture the entire driving process in video and audio, providing evidence for traffic accidents. While driving, the dash cam continuously records footage, simultaneously logging time, speed, and location in the recordings. It can also be used at home as a DV camera to capture life's moments or serve as a home surveillance device, and it can function as a parking monitor when needed. Typically, a dash cam consists of a main unit, speed sensor, data analysis software, and infrared camera.

19

1

Share

How to Write a Vehicle Certificate?

Can people with mild color weakness get a driver's license?

How Often Should a Fuel-Powered Car Be Charged?

What is the fuel consumption of the BJ80?

Will the car be damaged if the gears grind when shifting?

Can You Drive with a Deformed Tire?

What does auto shutdown mean in a dash cam?

How many months does a domestic car have to be in stock to be considered a stock car?

What Causes Gasoline Leakage in Cars?

What do 1st, 2nd, 3rd, 4th, and 5th gears mean?

What Causes the Car Charger Indicator Light Not to Illuminate?