How to Wax a Car in Winter?

What is the fuel consumption per 100 kilometers for the BMW 3 Series?

The BMW 3 Series has a fuel consumption of 6.1-6.9 liters per 100 kilometers. However, this is the NEDC combined fuel consumption, which is the data measured under the NEDC test procedure for combined driving conditions. The actual fuel consumption is higher than this value, ranging from 8.66-8.95 liters per 100 kilometers. The level of a car's fuel consumption is directly related to five major factors: driving habits, the car itself, road conditions, natural wind direction, and environmental temperature. The specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, overtaking, or not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements typically mean greater power output, requiring more gasoline to burn and perform work. Cars with greater weight also consume more fuel because heavier weight requires greater driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind direction: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block is cold, the injected gasoline is less likely to atomize during a cold start, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

1

4

Share

What Kind of Driver's License is Required to Drive Large Vehicles?

Large vehicles typically refer to heavy-duty trucks, medium and heavy-duty specialized operation vehicles, or tractor-trailers. To operate such vehicles, one usually needs to hold a B2 or A2 driver's license and also obtain a freight transport professional qualification certificate for drivers. Only with these can one engage in corresponding road transport activities. Requirements for the freight transport professional qualification certificate: Under 60 years of age; possess the corresponding motor vehicle driving qualification; must have obtained the freight transport driver's professional qualification for at least 2 years, with no major traffic accident liability within the past 3 years; loading and unloading managers and escorts should have at least a junior high school education; understand road freight transport laws and regulations, and possess basic knowledge of motor vehicle maintenance and cargo storage. Annual review regulations for freight transport qualifications: Drivers must participate in an annual integrity assessment and undergo continuing education for the road transport professional qualification certificate every 2 years; The annual review process for C1 light trucks, B2 heavy trucks, and A2 semi-trailers is the same as that for regular trucks; Road transport professional qualification certificates are divided into three types: freight, passenger, and hazardous materials. Certificates for transporting hazardous materials and large-scale operations are reviewed annually.

6

2

Share

What Causes Squeaking When Braking Lightly but Not When Braking Hard?

Light braking causing a squeaking sound is generally due to the friction between the metal hard spots on the surface of the brake pads and the brake disc. This does not adversely affect braking performance and can be used with confidence. Additional Information: Cause: All cars can have such noise, which is due to the brake pads being new. The surface of the brake pads is still relatively rough, and it will improve after some use. If you want an immediate solution, find a deserted place and stomp on the brakes a few times. Newly replaced brake pads can also produce such sounds. Solution: You can try to grind off the carbides on the surface of the brake pads. If the noise persists and the brake pads are newly replaced, it might be due to a mismatch between the disc and the pads causing the braking noise. If the vehicle has a high mileage, the edges of the brake disc might develop a 'step', and this 'step' can also cause noise when rubbing against the brake pads.

19

5

Share

Can the front and rear tires of a car be of different brands?

Front and rear tires can be of different brands, but their specifications must be the same. Additional information: Reasons: Generally, according to regulations, tires on the same axle must be the same (referring to tires from the same manufacturer and of the same model). This means the two front tires must be identical, and the same goes for the rear tires. Otherwise, issues such as pulling to one side and abnormal tire wear may occur, accelerating the tire replacement cycle. Influencing factors: Same specifications mean same tread pattern, same size, same load index, and same speed rating. The load index of the replacement tire must be greater than or equal to that of the original tire, and the speed rating of the replacement tire must be greater than or equal to that of the original tire.

20

3

Share

What are the reference points for Subject 2?

There are 7 types of reference points for Subject 2. Below is relevant knowledge about the reference points for Subject 2: Slope Fixed-point Parking and Starting: The test requires the vehicle to stop steadily on the slope, with the front bumper aligned with the parking line. The difficulty here lies in the timing of stopping. To master this timing, it is essential to learn to use reference points on the vehicle and facilities in the test area. Right-angle Turn The right-angle turn is considered a relatively simple task, but the tricky part is the timing of turning the steering wheel—turning too early will cause the rear wheel to run over the inner corner of the lane; turning too late will make the front corner exceed the outer edge of the lane, and if the right front wheel presses the line, it will result in immediate disqualification.

15

1

Share

Are There Any Tips for Repairing Car Hail Dents?

There are several methods for repairing car hail dents: For small dents on plastic structures, you can try the hot water pouring method. For larger damages, it is recommended not to attempt repairs yourself. Additional information: Assess the size and location of the dent: For larger dents: After a dent appears on the car body, first check the size and location of the dent before deciding whether to repair it yourself. If the dent is large, the damaged area is extensive, or the car paint is damaged, do not attempt to repair it yourself; instead, seek professional repair services. For dents that are not large but are deep (exceeding 1 cm), it is also not advisable to repair them yourself. Do not attempt to repair dents located at edges, creases, or other areas where force application is difficult or where the metal structure is complex. For small dents: If the dent is relatively small and in an easily repairable area, you may consider repairing it yourself. For plastic structures, you can try the hot water pouring method for repair.

3

5

Share

How to Wax a Car in Winter?

What is the fuel consumption per 100 kilometers for the BMW 3 Series?

What Kind of Driver's License is Required to Drive Large Vehicles?

What Causes Squeaking When Braking Lightly but Not When Braking Hard?

Can the front and rear tires of a car be of different brands?

What are the reference points for Subject 2?

Are There Any Tips for Repairing Car Hail Dents?

What is the appropriate speed for driving on highways?

Is it necessary to change the brake fluid when BMW prompts for replacement?

What is the difference between registering a vehicle at a service station and at the DMV?

Is GAC Trumpchi a Domestic or Joint Venture Car?