How to Wax a Car Correctly?

1 Answers
LaAlina
07/30/25 4:38am
Correct methods for car waxing: 1. Car washing - only after thorough cleaning can the car waxing and polishing process be smoothly completed; 2. Apply wax in straight lines, alternating between horizontal and vertical strokes, then follow the direction of rainwater flow for the final pass; 3. Buffing - a few minutes after waxing, the surface will begin to turn white, indicating the wax has dried. Use a soft towel to buff the wax until no residue remains on the car's surface. Functions of car waxing: 1. Heat resistance - car wax effectively reflects incoming light from various angles, preventing light from penetrating the clear coat and causing the base paint to age or discolor, thereby extending the paint's lifespan; 2. Anti-static effect - car static electricity mainly comes from two sources: friction between synthetic fibers, silk, wool fabrics, etc., and friction between the car's paint and airborne dust during driving. Regardless of the cause, static electricity can bring unnecessary trouble or even harm to drivers and passengers.
Was this review help?
16
5
Share
More Forum Discussions

Where is the cabin air filter located in the Cadillac XTS?

The cabin air filter in the Cadillac XTS is located inside the glove compartment on the passenger side. Functions of the cabin air filter: 1. It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin; 2. It separates solid impurities such as dust, pollen, and abrasive particles from the air; 3. It absorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, and other substances from the air. The Cadillac XTS is a mid-to-large luxury sedan under the Cadillac brand, equipped with a 2.0-liter turbocharged engine across the lineup. This engine delivers a maximum power of 198 kW and a maximum torque of 353 N·m, with the maximum power achieved at 5,300 rpm and the maximum torque available between 2,000 and 5,000 rpm. The engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 6-speed automatic transmission.
3
2
Share

Where are the reference points for the right-angle turn in Subject 2?

In the right-angle turn, the two key reference points are the inner corner and the points on the rearview mirror, as well as the point on the hood of the car. Below is extended information about Subject 2: 1. Subject 2 content: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skill test. The test items for cars C1 and C2 include five mandatory tests: reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-turns). Some regions also include a sixth item: high-speed card collection. 2. Teaching objectives: Master the basic driving operation essentials and possess the fundamental ability to control the vehicle; proficiently master the basic methods of field and road driving, possess the ability to reasonably use vehicle control components and correctly control the vehicle's spatial position, and be able to accurately control the vehicle's driving position, speed, and route.
12
3
Share

Is the Subject 2 Test Conducted on Rainy Days?

Taking the Subject 2 test on a rainy day may have some impact, but the test will still proceed. Below is additional information about Subject 2: 1. Subject 2 Content: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment. It refers to the field driving skills test. For small vehicles (C1 and C2), the test includes five mandatory items: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as the S-curve). In some regions, there is a sixth item: high-speed toll collection. 2. Teaching Objectives: Master the basic driving operation essentials and possess the fundamental ability to control the vehicle; proficiently grasp the basic methods of field and road driving, have the capability to reasonably use vehicle control components and correctly manage the vehicle's spatial position, and accurately control the vehicle's position, speed, and route.
9
2
Share

How to Clear 3 Points Deducted from Driver's License?

If 3 points are deducted from your driver's license, the demerit points will be cleared once the fine is paid. Below are common traffic violations: 1. Running a red light: This is the most common violation. According to the new traffic regulations, running a red light results in a one-time deduction of 6 points; 2. Driving without a license: If a driver continues to drive while their license is suspended, they will face a fine and 15 days of detention. For driving without a valid license or driving with a revoked license, the penalty is 15 days of detention and a fine; 3. Speeding: If a vehicle exceeds the speed limit by 50%, the driver will be fined and their license will be revoked.
1
1
Share

What is the maximum number of hours per day for Subject 3 check-in?

Different types of driver's licenses require varying hours for Subject 3 check-in. For C1, C2, and C5 licenses, 24 hours are required; A1 and B1 require 20 hours; A2 requires 22 hours; A3 requires 33 hours; and B2 requires 32 hours. The implementation of check-in rules is not uniform nationwide, and many regions do not require check-ins. Below is a related introduction to the subject test content: 1. Subject 1: Road traffic safety laws, regulations, and related knowledge test (Subject 1) is a written exam conducted on a computer, with a full score of 100 points. A score of 90 or above (including 90) is considered passing. 2. Subject 2: On-site driving skills test (Subject 2) is conducted in a real vehicle on a designated course. The results are either pass or fail. The test includes five mandatory items performed in sequence: reversing into a garage, parallel parking, S-curve driving, right-angle turning, and hill start and stop. The full score is 100, and a score of 80 or above (including 80) is passing. 3. Subject 3: Road driving skills test (Subject 3) is conducted in a real vehicle on a simulated road course. The full score is 100. For large buses, a score of 90 or above is passing; for large trucks, 80 or above; and for other vehicle types, 70 or above. 4. Subject 4: Safety and civilized driving-related knowledge test (Subject 4) is a written exam with a full score of 100. A score of 90 or above (including 90) is passing.
19
5
Share

How many items are there for high beam in Subject 3?

There is only one item for high beam in Subject 3. Below is a relevant introduction about the subject test content: 1. Subject 1: Road traffic safety laws, regulations, and related knowledge test (Subject 1) written test, computer-based with a full score of 100, 90 or above is considered passing (including 90). 2. Subject 2: Field driving skill test (Subject 2) on-site, actual vehicle. Only pass or fail is given. Reversing into a garage, parallel parking, S-curve, right-angle turn, and hill start and stop are the five mandatory items conducted in sequence. Full score is 100, 80 or above is considered passing (including 80). 3. Subject 3: Road driving skill test (Subject 3) on simulated road conditions, actual vehicle. Full score is 100, large buses require 90 or above, large trucks require 80 or above, and other vehicle types require 70 or above to pass. 4. Subject 4: Safe and civilized driving related knowledge (Subject 4) written test, full score is 100, 90 or above is considered passing (including 90).
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.