···
Log in / Register

How to Warm Up the Car While Stationary?

1 Answers
EmersynDella
07/29/25 3:31pm
The correct steps for warming up a car while stationary are: Start the engine, let it idle for about one minute, then begin driving slowly. Once the coolant temperature reaches the normal operating range, you may drive according to your usual habits. When idling in place, the engine struggles to reach optimal operating temperature, whereas driving enables it to warm up faster. Lubricants and greases for various components only become fully activated through vehicle movement. Simply idling without engaging the powertrain systems prevents proper adaptation to working conditions. Systems like steering, braking, differential, and suspension all require motion to properly adjust to operational states.
Was this review help?
3
0
Share
More Forum Discussions

How to Switch to Total Mileage on Honda CR-V?

Honda CR-V switches to total mileage by: There is a rotatable button on the dashboard to toggle the display. The dashboard consists of three parts: the speedometer, the odometer, and the tachometer. Taking the Honda CR-V 2021 240TURBO Manual 2WD Classic Edition as an example: The manufacturer of this car is Dongfeng Honda, classified as a compact SUV, with a turbocharged intake form. The car's dimensions are 4621mm in length, 1855mm in width, and 1679mm in height, with a wheelbase of 2661mm. The body type is a 5-door, 5-seat SUV, and it comes with a 6-speed manual transmission.
19
3
Share

Is it okay to let family members drive my car for a long time?

It is okay to let family members drive your car for a long time. However, you need to pay attention to the following points: 1. Car owner: If you are the registered owner of the car, it means you will be responsible for any issues related to the vehicle. 2. Consequences: In case of an accident involving the car, the consequences will be borne by the registered owner. Additional information: 1. Registered owner: This refers to the unit or natural person registered in the vehicle registration book. According to current traffic management laws and regulations, if a registered vehicle is involved in an accident, the registered owner will bear the corresponding legal responsibility. This is a form of presumed liability in law. 2. Regulation: According to relevant laws, the vehicle owner and the license plate owner must be registered as the same person.
12
0
Share

Where is the engine of the Hongqi HS5 provided from?

The engine of the Hongqi HS5 is independently developed by China FAW. Taking the 2019 Hongqi HS5 2.0T Zhilian Qiyue Edition as an example, this vehicle is equipped with a 2.0T turbocharged engine, with a maximum power of 165 kW and a maximum torque of 340 N·m, paired with a 6-speed automatic manual transmission. The dimensions of this car are 4760 mm in length, 1907 mm in width, and 1700 mm in height, with a wheelbase of 2870 mm. Its curb weight is 1755 kg, and the body structure is a 5-door, 5-seat SUV. In terms of suspension, this car uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.
18
3
Share

What is the correct posture and method for depressing the clutch in Subject 2 of the driving test?

Subject 2 of the driving test requires the correct posture for depressing the clutch: when pressing the clutch with the ball of your foot, your heel should always remain firmly on the ground, and the toes should be used to press the clutch. When the clutch is fully depressed, the driver's knee should be slightly bent to allow free control of the clutch. The method for using the clutch in Subject 2 is: initially lift the clutch quickly, then slow down as you approach the critical point of semi-engagement to find the engagement point; when shifting into first gear or reverse, the sequence is to first fully depress the clutch and brake, then shift gears. The clutch is located within the flywheel housing between the engine and the transmission, with the clutch assembly secured to the rear plane of the flywheel by screws, and the output shaft of the clutch is the input shaft of the transmission.
4
0
Share

What causes the ESC light on the dashboard to illuminate?

Here are the reasons why the ESC malfunction indicator light on the dashboard may illuminate: 1. Alarm caused by software system issues; 2. Due to sensor failure or circuit short-circuit; 3. The possibility of false alarms cannot be ruled out. Below is the main introduction to the vehicle's ESC system: 1. Function: The ESC primarily ensures that the vehicle remains more stable and safe when changing lanes or turning, and the ESC system does not operate under normal driving conditions. 2. Composition: The ESC mainly consists of three parts: sensors, actuators, and the electronic control unit (ECU). A failure in any of these parts can cause the ESC malfunction light to illuminate.
15
2
Share

What to do if the Audi A6L screen goes black?

The solutions for a black screen on the Audi A6L are: 1. First, try restoring the factory settings or use a computer to troubleshoot. If that doesn't work, seek warranty service if still under warranty; 2. If out of warranty, go directly to a 4S store or a professional auto repair shop for maintenance. Focus on checking the touch range calibration, whether the wireless receiver's ID matches the one set in the host program, and the distance issue of the wireless receiver. Taking the 2021 Audi A6L 45 TFSI Premium Dynamic model as an example, its body dimensions are: length 5050mm, width 1886mm, height 1475mm, wheelbase 3024mm, fuel tank capacity 73L, and it features front-engine, front-wheel drive.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.