How to Warm Up a Car Quickly in Winter?

How to charge a mobile phone in the 2021 Audi A6L?

Apply through the Comprehensive Traffic Safety Management Platform or the Traffic Management 12123 mobile app, fill in the relevant information, and after the vehicle management office accepts the application, the required documents will be collected via courier service. Upon verification, the vehicle management office will deliver all inspection compliance labels to your doorstep by courier. Annual Inspection Considerations: During the annual inspection, the vehicle management office will check the vehicle's lights. If the lights are found to be too dim or too bright, the vehicle will be deemed unqualified and will not pass the inspection. If the lights are too dim, check the wiring and bulbs for aging, and replace the relevant parts if necessary. If xenon headlights have been installed, it is recommended to revert to the original headlights before the annual inspection to pass the test.

3

Share

How to conduct annual review after upgrading from C1 to D license?

The upgraded C1D driver's license is equivalent to a newly obtained C1 license and does not require annual review. It should be renewed every 6 years. If the demerit points are within 12 points, the driver just needs to pay the traffic violation fines, and the points will be automatically cleared after the scoring cycle. If the demerit points reach or exceed 12 points, the driver must participate in study sessions and pass exams at the vehicle management office before the points can be deducted. If a motor vehicle driver accumulates 12 demerit points within a scoring cycle, the traffic management department of the public security organ shall detain their motor vehicle driver's license. Specific details of upgrading to C1: Just like applying for a C1 license, you first need to submit an application at the local vehicle management office. After the application is approved, you must undergo a medical examination at a hospital. Upon completing the medical examination, bring the medical report, ID card, and application form to the vehicle management office for review. Once approved, you will be scheduled for exams. Exams: The exams include a theoretical test and a field test. The theoretical test covers the same content as Subject 1. Since you already have a C1 license, this test should not be too difficult. The field test includes items such as stake parking, curves, single-plank bridge, and slopes, which are not very challenging. You have two attempts for the field test. If you fail the first time, you can retake it once. If you fail the retake, you can pay to take the test again.

17

3

Share

How long after C1 registration can I schedule the subject 1 test?

After successfully enrolling in a driving school for C1 and completing the medical examination, you can schedule the subject 1 test online in about 10 days. Before scheduling, you should review the subject 1 exam materials and practice test questions. Enrollment in a driving school is only preliminary. After enrollment, the driving school submits the documents to the vehicle management office. Upon approval, the vehicle management office will issue a serial number, indicating successful registration. Once registered, you can schedule the subject 1 test. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the subject 1 test consists of 100 multiple-choice and true/false questions, each worth 1 point. If you answer 11 questions incorrectly during the test, the system will automatically submit the test and end the exam. Subject 1 test content: Regulations on driving licenses and motor vehicle management; road traffic conditions and regulations; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 exam precautions: During the subject 1 exam, students should pay attention to their attire—no slippers are allowed. Electronic devices and bags are not permitted in the exam room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in a locker before entering the exam room. In the exam room, the identity verification station will assign a seat. Once seated, begin the exam. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, a retake is available on the same day. If you fail again, you must pay to reschedule. After the exam, queue to collect your score report and sign it. Failure to sign will render the result invalid. There is no limit to the number of times you can schedule the subject 1 test. Each subject can be taken once, with one retake if you fail. If you do not take the retake or fail it, the exam process ends, and you must reschedule. For subjects 2 and 3, there are only five exam attempts. Subject 2 and 3 exams can be scheduled ten days later. If you fail the subject 3 safe driving knowledge test, the previously passed road driving skills test results remain valid. The driving test consists of three subjects: subject 1, subject 2, and subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge exam. Subject 2 refers to the field driving skills test. Subject 3 is divided into two parts: road driving skills and safe driving knowledge. The safe driving knowledge test is conducted after subject 3, so it is commonly referred to as subject 4. However, the official term (as per the Ministry of Public Security Order No. 123) does not include subject 4.

7

2

Share

Is It Safe to Continue Driving When the ABS Light Comes On?

When the ABS warning light is illuminated, it is recommended not to continue driving. The ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may lose control and skid, making it difficult for the driver to decelerate or adjust the vehicle's trajectory, posing significant safety risks. The ABS light can illuminate in various states, each with different causes and solutions, as detailed below: State 1: ABS warning light remains constantly on (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS control unit from determining the vehicle speed and wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal transmission due to loose system wiring connections or faulty ABS relay contacts. Solution: Inspect wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical components are in use, the battery voltage drops below 10.5V. As engine speed increases and voltage rises, the ABS light turns off. This may also occur if the ABS system's power supply voltage is too low, such as due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding of the ABS hydraulic valve body; loose wiring connections at the ABS hydraulic valve body; or ABS control unit malfunction. Solution: Loosen and retighten the hydraulic valve body's grounding screw, cleaning the contact surface if necessary. Check for enlarged terminal gaps and replace the ABS or ABS/ASR control unit if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: The ABS control unit detects a significant discrepancy between rear and front wheel speed signals during high-speed driving. This may also occur due to incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's specified tire and wheel rim sizes, as indicated on the fuel tank cap label. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and manually push the brake switch linkage down fully, then release the pedal to complete self-adjustment. Replace the brake light switch if necessary.

11

2

Share

What lubricant is used for door stoppers?

Door stoppers can be lubricated with specialized door hinge and track grease to reduce friction and wear on mechanical components, extending the service life of the stopper. Here is more information about door stoppers: 1. Installation and Tightening: The door stopper is secured to the car body via mounting bolts, while the stopper box is fastened to the door with two mounting screws. When the door is opened, the stopper box moves along the stopper arm. 2. Structure: Due to the varying heights on the stopper arm, the elastic rubber block undergoes different degrees of elastic deformation. At each stopping position, this structure effectively limits the door's movement.

6

2

Share

Can a Driver's License Be Restored After Being Revoked for Ten Years?

It cannot be reinstated, but you can directly apply for the corresponding motor vehicle driver's license test for the permitted vehicle type without undergoing driving school training. Below is relevant information about driver's licenses: 1. Driver's License: A motor vehicle driver's license requires registration and passing an exam at a local driving school to obtain. It is a valid document for driving motor vehicles, serving as proof of driving skills and a permit to operate motor vehicles. Driving without a valid driver's license is illegal and violates the Road Traffic Safety Law of the People's Republic of China. 2. Replacement: A lost motor vehicle driver's license can be replaced at the vehicle management office or the traffic management department of the public security authority. It can also be replaced through the mobile app "Traffic Management 12123." After losing the driver's license, it must be promptly replaced for use; otherwise, penalties for driving without a license will apply.

9

3

Share

How to Warm Up a Car Quickly in Winter?

How to charge a mobile phone in the 2021 Audi A6L?

How to conduct annual review after upgrading from C1 to D license?

How long after C1 registration can I schedule the subject 1 test?

Is It Safe to Continue Driving When the ABS Light Comes On?

What lubricant is used for door stoppers?

Can a Driver's License Be Restored After Being Revoked for Ten Years?

What Materials Are Needed for Vehicle Registration?

What is the method for changing automatic transmission fluid?

What Causes Uneven Tire Wear on Cars?

How to Adjust the Time on an A6?