How to Walk Around the Vehicle Counterclockwise in Subject Three?

1 Answers
OAmelia
07/30/25 4:52am
Walking around the vehicle counterclockwise in Subject Three starts from the driver's seat, proceeds counterclockwise towards the rear of the vehicle, and finally returns to the driver's seat. Below is relevant information about Subject Three: 1. Introduction: Subject Three, which includes the road driving skills test and the safety and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies for different types of vehicles eligible for driving. 2. Test Content: The road driving skills test for Subject Three generally includes: preparation before driving, simulated lighting test, starting, driving straight, shifting gears, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. The safety and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and knowledge of post-accident handling procedures.
Was this review help?
9
1
Share
More Forum Discussions

What Causes a Mercedes Fuel Gauge to Suddenly Display Zero?

When a Mercedes fuel gauge suddenly stops displaying, it is often due to the loss of signal from the fuel level sensor in the fuel tank. The possible causes for this issue include: 1. Damage to the fuel level sensor; 2. Software or hardware failure within the fuel control computer; 3. Short circuit in the wiring harness of the fuel control computer or fuel level sensor. Relevant information about automotive fuel tanks is as follows: 1. Introduction: The automotive fuel tank is the full name for the car's fuel container. Currently, with the development of the automotive industry and the revitalization of the domestic automotive sector, major automobile manufacturers are experiencing a significant increase in demand for automotive fuel tanks. 2. Design Principle: Utilizing the heat generated by the engine during operation, a thermal circulation system is added between the engine, fuel tank, and radiator. The original single fuel tank design is replaced by a combined fuel tank consisting of a main tank and an auxiliary tank.
19
0
Share

Why Was the Buick LaCrosse Hybrid Version Discontinued?

The reasons for the discontinuation of the Buick LaCrosse Hybrid version are as follows: 1. Insufficient fuel economy: The official combined fuel consumption of the LaCrosse Hybrid is 4.7L/100km, but in reality, it likely does not achieve such a low level. The actual fuel consumption is probably at least 6L/100km. Since the 1.8L naturally aspirated engine in the LaCrosse does not use the Atkinson cycle, its fuel economy is slightly inferior compared to other hybrid models. 2. Weak high-speed performance: The LaCrosse Hybrid has a relatively small battery capacity, so the engine tends to engage earlier. The overall power output of the LaCrosse Hybrid is somewhat lacking, with the 1.8L engine producing 124 horsepower and 175 Nm of torque, while the main electric motor delivers a maximum power of 81 horsepower and 275 Nm of torque. Although the initial acceleration benefits from the full torque output of the electric motor, a noticeable power drop can be felt during mid-range acceleration.
15
5
Share

What is the correct ignition sequence for an automatic transmission?

Automatic transmission cars have the correct ignition and starting sequence as follows: ignition, gear adjustment, engine start, moving off, and accelerating. Below are some precautions for driving an automatic transmission car: Regular roads: There are no specific requirements for the car's gear; you can drive normally by keeping it in D (Drive) mode. Parking: When the engine stops running, you need to shift the gear to P (Park) to indicate that the car is no longer in use. Some cars require shifting to P mode to remove the key. Reversing: After pressing the brake and ensuring the car has completely stopped moving forward, you can shift to R (Reverse) mode. Gently releasing the brake will allow the car to move backward. Waiting at a stop or driving in congested traffic: You can shift to N (Neutral) mode. Highways or when overtaking at high speeds: You can shift to S (Sport) mode. S mode is the car's sport mode, allowing free gear changes similar to D mode. You can also choose S mode when climbing hills, as this gear provides the maximum torque output and acceleration.
17
0
Share

Why is the grease gun not discharging oil and lacking pressure?

The grease gun not discharging oil and lacking pressure is due to the wear of the sealing ring on the piston ring in the pneumatic cylinder of the oil machine, causing "cross-flow" from the intake chamber to the exhaust chamber (failing to separate the two chambers). As a result, gas continuously flows out from the other chamber of the cylinder, leading to uninterrupted leakage and exhaust from the silencer of the control valve. More details are as follows. The grease added to the grease gun must be clean: The added grease must be clean and free from any impurities and moisture. Water can corrode the oil pump, so any substances containing water are prohibited from being added to the grease machine. Regularly keep the exterior of the grease machine clean, wipe it frequently, and apply lubricating oil. Environmental precautions: Electric grease machines should not be placed in damp or unclean areas. If the grease machine gets damp, it will cause the machine to overheat during operation. Additionally, excessively high ambient temperatures are also unsuitable, so it is essential to ensure the location is dry and well-ventilated in a timely manner.
16
3
Share

Can a Lost Mercedes Key Be Located and Retrieved?

Mercedes car keys cannot be located. Lost keys are rarely recovered unless they are misplaced at home or in the parking area, in which case the chances of finding them are slightly higher. Currently, car keys do not come with built-in positioning functionality, except for some high-end models that incorporate advanced features into their keys. Information about keyless entry systems for cars is as follows: 1. Introduction: The car keyless entry system, abbreviated as PKE (PASSIVE-KEYLESS-ENTER), utilizes the world's most advanced RFID radio frequency technology and vehicle identity coding recognition system. It pioneers the application of miniaturized, low-power RF antenna development solutions. 2. Working Principle: When the owner turns the key to start the vehicle, the base station emits a low-frequency signal to initiate the authentication process. The transponder in the key operates on energy provided by the base station's low-frequency signal. During authentication, the transponder inside the key first sends its own ID number. After verification by the base station chip, the base station transmits a string of random numbers and a MAC address, to which the transponder then responds.
2
0
Share

What are the common faults of Volvo XC40?

Common faults of Volvo XC40: 1. Fuel quality issues: The fuel quality does not meet standards. Some owners may find the engine warning light illuminated on the dashboard immediately after refueling, which is usually caused by poor-quality gasoline from non-standard gas stations. 2. Carbon deposits in the engine and spark plugs: After some time of use, carbon deposits will accumulate in the engine, which can lead to engine damage, difficulty starting, poor acceleration, excessive engine noise, and other issues. The accumulated heat can cause irregular engine ignition, leading to engine knocking. At this point, the engine warning light will turn on. 3. Damage to the water temperature sensor: When the engine water temperature is low, the water temperature sensor sends information to the ECU to enrich the air-fuel mixture, ensuring stable engine operation. If the water temperature sensor fails to indicate a cold engine condition, the air-fuel mixture will become too lean, causing abnormal engine operation. Similarly, if the sensor indicates a cold engine condition when the engine is warm, the air-fuel mixture will become too rich, also leading to abnormal engine operation.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.