How to View the Dashcam Footage on a 360-Degree Surround View System?

What are the differences between Volkswagen Golf and Golf Sportsvan?

Both the Golf and Golf Sportsvan are vehicles under the Volkswagen brand. The main differences between the Golf and Golf Sportsvan are as follows: 1. In terms of the car body and wheelbase, the Golf Sportsvan has obvious advantages. The Golf Sportsvan features chrome trim decorations on the body, paired with a silver body, giving it a more sporty appearance. 2. At the rear of the car, the Golf Sportsvan has a noticeably extended spoiler, which enhances its texture, while the rear of the Golf is relatively flat. 3. Regarding the taillights, there are significant changes. Both models are equipped with reverse radar warnings, providing good assistance when reversing. 4. In terms of interior components, apart from the different appearance designs of the dashboard. 5. The arrangement of control units on the dashboard also differs significantly. The dashboard of the Golf Sportsvan has a more pronounced texture, while the Golf's dashboard appears more integrated, emphasizing simplicity and elegance. 6. In terms of the steering wheel, there are noticeable differences between the two models. The Golf features a leather-wrapped steering wheel. 7. In terms of tactile feel, it is significantly better than that of the Golf Sportsvan, and it is paired with multifunctional buttons, making it more efficient and convenient to use. 8. In terms of controls, the operation methods are the same, both using up-down and front-back controls. 9. In terms of design, both models adopt a flat-bottom three-spoke steering wheel design. 10. In terms of body dimensions, the Golf Sportsvan measures 4348mm in length, 1807mm in width, and 1574mm in height, with a wheelbase of 2680mm. The Golf measures 4259mm in length, 1799mm in width, and 1452mm in height, with a wheelbase of 2637mm.

8

4

Share

What Does Remote Engine Start Mean?

Remote engine start, also known as engine remote start, refers to the ability to start a vehicle's engine remotely using the car's key fob. The working principle is that the vehicle receives signals from the remote key to start the engine or motor. Here are some precautions for using remote engine start: The preheating time should not exceed the manufacturer's limit of ten minutes, and the number of starts should not exceed two. This is because the engine warms up much more slowly when idling than when driving normally, and the three-way catalytic converter takes longer to reach its optimal working temperature of 350 degrees Celsius. During this time, the unburned exhaust gases can place a significant burden on the catalytic converter, potentially damaging it over time. However, if used correctly within the manufacturer's programmed limits, there should be no issues.

3

1

Share

How to Remove the Heater in a Classic Focus?

Classic Focus heater removal method is: 1. Remove the glove box on the passenger side; 2. Remove the internal and external circulation ducts inside; 3. Go to the driver's side accelerator pedal, unscrew the mixing head downward, and push it toward the passenger side. The heater is a combined unit consisting of a fan, motor, and air heater, suitable for various types of workshops. When the air does not contain dust or flammable/explosive gases, it can be used for circulating air heating. Taking the 2021 Focus as an example, its body dimensions are: length 4647mm, width 1810mm, height 1468mm, wheelbase 2705mm, fuel tank capacity 53 liters, and trunk capacity 511 liters.

12

3

Share

Will the car be affected if it runs out of windshield washer fluid?

If the windshield washer function is not used, there will be no impact on the vehicle itself. However, if the washer function is used for a long time without windshield washer fluid, the washer pump may run dry and could potentially burn out the motor of the washer fluid reservoir. Additionally, driving without windshield washer fluid can significantly affect driving safety. Precautions when adding windshield washer fluid: 1. Pay attention to the amount of fluid added; it is best not to exceed the MAX mark, leaving some space. 2. If purchasing concentrated windshield washer fluid that needs to be diluted, always read the instructions before use. Dilute the concentrated fluid before adding it. When adding, open the windshield washer fluid reservoir in the engine compartment and pour in the prepared mixture. 3. Choose the appropriate windshield washer fluid based on your driving environment. If driving in colder climates, consider purchasing anti-freeze windshield washer fluid. In southern regions, washer fluid with insect repellent additives may be more suitable.

17

2

Share

What are the precautions for replacing a car battery?

Precautions for replacing a car battery include: 1. Confirm the battery installation location. In most models, it is installed in the engine compartment or luggage compartment, while some models may have it installed in the cabin; 2. Remove external protective devices such as the battery cover and measure the voltage between the two poles with a multimeter; 3. If the vehicle is equipped with an anti-theft system (including audio anti-theft), you can first connect an external power source or parallel a fully charged battery. Note to connect the positive terminal first and then the negative terminal. The positive terminal of the external power source can be directly connected to the positive terminal post, but the negative terminal should not be directly connected to the negative terminal post. Instead, it should be connected to the vehicle body ground; 4. Turn off the ignition switch of the faulty vehicle, disconnect the negative connection first, then the positive connection; 5. Remove the battery's fixing device and take out the battery. If the vehicle is connected to an external power source, be careful not to let the positive terminal contact the vehicle body. Use cotton cloth or other materials for isolation; 6. If the old battery has leakage or corrosion, clean the connections and other related parts.

14

2

Share

Left Foot or Right Foot for Car Braking?

Both the brake and accelerator are controlled by the right foot, with the brake pedal located on the left side and the accelerator pedal on the right. In manual transmission cars, there are three pedals from left to right: the clutch pedal, brake pedal, and accelerator pedal. Automatic transmission cars only have two pedals: the brake pedal and the accelerator pedal. This means manual cars require both feet to operate, while automatic cars only need the right foot. The braking system, also known as the deceleration system, is a mechanical device that slows down the vehicle and is one of the car's important components. Braking is achieved through intense friction between the brake pads and brake drum. A car's braking performance significantly decreases in water, so drivers should maintain safe distances and brake early during rainy conditions. During prolonged driving, both feet can become fatigued and may unconsciously press down. If the left foot happens to be on the brake pedal at this moment, accidental braking could easily occur, leading to dangerous situations. Most people naturally have more agile right feet with faster reaction times. In emergency situations, the right foot can quickly respond by lifting off the accelerator and pressing the brake pedal.

17

3

Share

How to View the Dashcam Footage on a 360-Degree Surround View System?

What are the differences between Volkswagen Golf and Golf Sportsvan?

What Does Remote Engine Start Mean?

How to Remove the Heater in a Classic Focus?

Will the car be affected if it runs out of windshield washer fluid?

What are the precautions for replacing a car battery?

Left Foot or Right Foot for Car Braking?

What are the benefits of independent throttle bodies?

Why Can't the Steering Wheel Lock and the Key Won't Turn?

What to Do When Car Window Makes Noise While Rolling Up?

What is the tire specification for the 2016 Mistra?