How to view photos after paying the fine on 12123?

2 Answers
LaNoah
07/29/25 3:07am
You cannot view photos after paying the fine on 12123. Below is relevant information about vehicle violations: 1. The meaning of violation code 1039: Traffic violation code 1039 refers to the act of a motor vehicle being parked or temporarily stopped in violation of regulations, with the driver not present or refusing to leave immediately even if present, thereby obstructing the passage of other vehicles and pedestrians. 2. Introduction to vehicle traffic violation codes: Traffic violation codes, also known as traffic offense codes, are encoding regulations established by the Ministry of Public Security for traffic violations committed by motor vehicles and pedestrians. By querying the new traffic violation codes, the specific violation details of the driver can be quickly identified, speeding up the penalty process for traffic violations.
Was this review help?
7
2
Share
AveryDella
08/12/25 6:59am
Last time after handling the fine, I also wanted to view the photos, and the process was quite simple. First, open the 12123 App and log in to your account, then go to the 'My Violations' section to find the paid records. Click into the event details to see the associated photos. Checking these photos is crucial because sometimes there might be errors in parking location or time, and confirming them can avoid future disputes. I recommend checking the photos within 24 hours after payment, as the system updates quickly and won't miss anything. If the photos fail to load, it might be due to network issues or the App's cache being full; usually, exiting and retrying solves the problem. Remember, regularly checking violation records helps identify areas for improving driving habits—after all, safety comes first.
Was this review help?
3
4
Share
Expand All
More Forum Discussions

What does 'sweeping the line' mean?

Sweeping the line is a foul term in the driving license subject two exam. Introduction to sweeping the line: It refers to the wheels pressing against the line or the vehicle body crossing the line. During the exam, the vehicle must not sweep the line at any time, let alone press against it. It's also important to note that during reverse parking, it's not just about the wheels not pressing the line; the vehicle body must not cross the line either, as crossing the line results in failure. Subject two evaluation criteria: During the subject two exam, not following the prescribed route or sequence results in failure. The vehicle body pressing the line or failing to complete reverse parking results in failure. Taking more than 210 seconds to complete reverse parking results in failure. Stopping midway deducts 5 points each time.
10
2
Share

What Causes the Warning Light to Keep Coming On?

Possible reasons for the car warning light to illuminate are as follows: 1. Abnormal engine oxygen sensor: There are many situations where the engine warning light is triggered by an abnormal oxygen sensor. The oxygen sensor is usually placed near the intake manifold. Aggressive driving or collisions can cause the sensor to shift or become damaged, leading to sensor abnormalities and triggering the warning light. 2. Clogged fuel injectors and carbon buildup on intake valves: These can also cause the engine warning light to activate. Impurities in gasoline can accumulate at the fuel injector, affecting fuel spray, especially in direct-injection engines, which can directly lead to engine shutdown. After combustion, these impurities form carbon deposits, which, when accumulated on the throttle valve, can interfere with its normal operation, affecting engine performance and causing the warning light to illuminate. 3. Another common issue is sensor malfunction. For example, after driving on a muddy road, the engine warning light may suddenly come on, even though the car shows no other abnormalities. A sensor anomaly doesn't necessarily indicate a vehicle fault, but it does signal an issue that requires attention.
16
3
Share

Where is the air conditioning relay located in the new Santana?

The air conditioning relay in the new Santana is located on the circuit board behind the fuse box. The air conditioning relay can display the three-phase power supply voltage in real time, and can provide alarm output and protective circuit action output contact control signals through relay output when power supply failures such as overvoltage, undervoltage, phase loss, three-phase voltage imbalance, or phase sequence error occur, serving alarm and protection functions. The Santana is a compact car produced by Volkswagen, with dimensions of 4437mm in length, 1706mm in width, and 1469mm in height, and a wheelbase of 2603mm. The vehicle is equipped with features such as ESP, cruise control, and leather seats. The use of EPC electronic power steering also makes the car easier to drive, with lighter steering effort at low speeds.
16
2
Share

What is the function of the car aoff button?

The function of the car aoff button is auto start-stop. Meaning of auto start-stop: Engine auto start-stop automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light) during driving. When it's time to move forward again, the system automatically restarts the engine. This is achieved by equipping traditional engines with an enhanced motor featuring idle start-stop capability, allowing the engine to completely shut off when idle stop conditions are met. Advantages of auto start-stop: It can reduce unnecessary fuel consumption, lower emissions, and improve fuel economy. In urban traffic when waiting at traffic lights or during traffic jams, it minimizes engine idling time. Moreover, after the engine shuts off, the power supply can replace the belt pulley to provide operating power for the engine cooling fan and in-car air conditioning.
1
0
Share

What are the reasons for the Honda CRV window not rolling up properly?

The reasons for the Honda CRV window not rolling up properly are: 1. Aging or deformation of the glass seal; 2. Dirty window lift guide rails; 3. Malfunction of the window lift guide rails. The solutions are: 1. Spray some dashboard wax on the glass seal or apply talcum powder; 2. Clean the window lift guide rails; 3. Replace the window regulator. The Honda CRV is a classic urban SUV model produced by Dongfeng Honda, with dimensions of 4550mm in length, 1820mm in width, and 1685mm in height, and a wheelbase of 2620mm. The vehicle is equipped with SRS dual airbags, door beams, front and rear 3-point ELR seat belts, seat belt reminders, and a seat safety system with pre-tensioners and load limiters.
10
0
Share

How to Shift from S Gear to D Gear?

D gear and S gear can be switched regardless of vehicle speed or road conditions. To shift to S gear, simply push the gear lever to the S position. More details about S gear are as follows: 1. S stands for Sport mode, which is a high-rev gear that delays upshifts and initiates early downshifts. It provides better vehicle power, making it suitable for climbing slopes or overtaking when extra power is needed. Switching between S and D can generally be done at any time, but it is advised not to shift from D to S when the vehicle speed or engine RPM is high. 2. Shifting from S gear to D gear does not require pressing the brake, and the same applies when shifting from D to S. In automatic transmission models, S gear and D gear are essentially the same gear position and use the same shifting mechanism. The difference lies in the tuning of the engine and throttle, as well as the timing of gear shifts by the transmission, allowing drivers to experience different driving modes.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.