···
Log in / Register

How to Use Windshield Washer Concentrate?

3 Answers
DelMia
09/08/25 7:12am
Ultra-concentrated products need to be diluted with water before use, typically at a ratio of 1:15. Open the engine compartment, locate the windshield washer fluid reservoir, pour in the diluted solution, and activate the wipers to automatically clean the windshield.
Was this review help?
3
2
Share
DanielaDella
09/20/25 5:41am
I often drive long distances, and the use of windshield washer fluid is quite simple yet very practical. First, locate the washer fluid reservoir under the hood—its cap usually has a windshield wiper icon or is labeled "washer fluid." Gently unscrew the cap. Slowly pour the washer fluid in, but don’t fill it to the brim—leave some space to prevent spills from bumps. I prefer using antifreeze washer fluid in winter and a regular, high-water-content type in summer to ensure effective removal of dust and grease. After starting the car, press the wiper lever or button near the steering wheel, and it will automatically spray fluid while activating the wipers, quickly clearing the windshield. Key points: Never use tap water as a substitute—it can cause scaling and clog the nozzles. Check the fluid level monthly and top it up when low to maintain clear visibility for safer driving. I also recommend using dedicated washer fluid and avoiding mixing different brands to prevent chemical reactions that could reduce cleaning effectiveness.
Was this review help?
14
1
Share
Expand All
Sylvia
11/03/25 6:04am
My experience with windshield washer fluid has been quite smooth, and it's easy to get started. Open the car hood, locate a transparent plastic container, usually labeled as washer fluid, unscrew the cap, and pour the fluid in slowly. The operation is straightforward: start the vehicle, lightly press the wiper switch, and the nozzles will spray water while the wipers clean the windshield. I prefer all-season windshield washer fluid for its convenience and reliability. If you're worried about freezing in winter, opt for one with antifreeze properties. Be careful not to overfill, and test the spray to ensure even distribution. Before driving, take a quick glance at the container—top it up if the level is low to avoid impaired visibility while on the road. In short, just make it a habit, and it’s both safe and efficient.
Was this review help?
17
3
Share
Expand All
More Forum Discussions

When will the China 6 Honda Fit be launched

The China 6 Honda Fit was launched in July 2020. Below are the relevant details about the Fit: 1. Body dimensions: The Fit has a body length of 4096mm and a wheelbase of 2530mm, maintaining a 5-door, 5-seat hatchback compact car layout, with a weight ranging from only 1058kg to 1073kg. It reaches maximum horsepower at 6600 rpm and maximum torque of 155 Nm at 4500 rpm. 2. Fuel injection method: The vehicle features a DOHC double overhead camshaft valve train structure, standard with Honda's unique i-VTEC engine technology. The engine uses 92-octane gasoline, direct fuel injection, and is constructed from aluminum alloy materials. 3. Suspension: The front suspension uses a MacPherson strut setup. The rear wheels employ a torsion beam non-independent suspension. Front brakes are ventilated disc brakes, while the rear uses drum brakes.
1
3
Share

What are the steps for removing and installing the valve cover on a BMW 523 inline 6-cylinder engine?

The steps for removing and installing the valve cover on a BMW 523 inline 6-cylinder engine are: 1. Remove the air conditioning intake cover on the left side of the engine; 2. Remove the ignition coils and fuel rail, and disconnect the wiring harness; 3. Remove the valve cover screws diagonally from the sides to the center, and use a flat-head screwdriver to pry the valve cover loose. Taking the BMW 5 Series 2012 523Li Leading model as an example: it is a mid-to-large-sized car with a body length of 5039mm, width of 1860mm, height of 1471mm, and a wheelbase of 3108mm. The front suspension uses a double-wishbone independent suspension, and the rear suspension uses a multi-link independent suspension. It is equipped with a 2.5L engine model N52B25, paired with an 8-speed automatic transmission.
18
3
Share

What Are the Common Causes of Discharge Faults in Honda Civic?

Honda Civic common discharge faults are caused by: the owner's unauthorized installation of electrical appliances leading to excessive vehicle discharge current. Therefore, the first step is to check whether the vehicle has been equipped with devices such as global satellite positioning navigators, radar detectors, anti-theft devices, and car phone chargers. Taking the Civic 2021 HATCHBACK 220TURBO Manual Fun Control as an example: it is a 5-door, 5-seat hatchback equipped with a 6-speed manual transmission and a fuel tank capacity of 47L. The Civic 2021 HATCHBACK 220TURBO Manual Fun Control uses a 1.5T inline 4-cylinder engine, with a maximum torque of 226 Nm, a maximum power of 130 kW, and a top speed of 210 km/h.
20
1
Share

What Causes Engine Shaking and Exhaust Puffing?

The reasons for engine shaking and exhaust puffing include: 1. Engine misfire: The exhaust gas flow shows obvious intermittency, and the exhaust pipe shakes severely, which is largely related to ignition coil failure; 2. Overly rich fuel mixture: Mostly caused by carbon deposits, clogged filters, etc.; 3. Cold start: During a cold start, the engine lubrication effect is relatively poor, and the engine oil has poor fluidity and is more viscous, resulting in abnormal noises from mechanical wear. The car engine is the device that provides power to the car, serving as the heart of the vehicle, determining its power, fuel economy, stability, and environmental friendliness. Depending on the power source, car engines can be divided into diesel engines, gasoline engines, electric vehicle motors, and hybrid engines.
7
5
Share

What is the standard tire pressure for the Nissan Qashqai?

The standard tire pressure for the Nissan Qashqai is: front wheels 2.3bar, rear wheels 2.1bar. Methods to check tire pressure include: 1. Consult 4S staff; 2. Visual inspection method; 3. Use instruments to measure tire pressure. The Nissan Qashqai is a compact SUV with body dimensions of: length 4401mm, width 1837mm, height 1593mm, wheelbase 2646mm, and a fuel tank capacity of 57 liters. The Qashqai is equipped with a 2.0L direct-injection naturally aspirated engine and a CVT continuously variable transmission, delivering a maximum power of 111kW and a maximum torque of 194Nm. It features a MacPherson strut independent front suspension and a multi-link independent rear suspension.
5
0
Share

How to Scrap and Deregister a Motorcycle That Is No Longer Available?

For a lost motorcycle, the owner can apply for deregistration by submitting a written statement along with the application. Here is the relevant information: 1. Motorcycles cannot be deregistered without being scrapped: For motor vehicles that have reached the mandatory scrapping standard set by the state, the owner must submit an application form, the vehicle registration certificate, license plate, and driving license when handing over the vehicle to a recycling company. The recycling company must confirm the vehicle and dismantle it, then issue a "Recycling Certificate for Scrapped Motor Vehicles" to the owner. 2. Scrapping mileage limits: Light two-wheeled motorcycles, light three-wheeled motorcycles, two-wheeled motorcycles, and sidecar motorcycles should be scrapped after accumulating 100,000 kilometers, while three-wheeled motorcycles should be scrapped after reaching 80,000 kilometers.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.