···
Log in / Register

How to Use Turn Signals in a Roundabout?

4 Answers
SanIsabella
07/23/25 10:16pm

In a roundabout, the methods for using turn signals are as follows: 1. Changing lanes when entering the roundabout: Generally, vehicles turning left will try to choose the inner lane of the roundabout. Since the vehicle needs to move from the outer lane to the inner lane, the driver must use the left turn signal to alert vehicles inside the roundabout and those behind, indicating the intention to change lanes for a left turn and reminding others to yield. 2. Going straight when entering the roundabout: If the vehicle is going straight and does not need to change lanes, there is no need to use the left turn signal when entering the roundabout. However, when the vehicle is about to exit the roundabout to continue straight, since it needs to cross the right lane inside the roundabout, the driver should use the right turn signal to alert other vehicles and then exit the roundabout. 3. Turning right when entering the roundabout: If the vehicle intends to turn right toward another exit, it should naturally choose the rightmost lane of the roundabout. This situation is similar to the second case, and there is no need to use the left turn signal. After selecting the corresponding exit, the driver should use the right turn signal in advance, confirm safety, and then turn right to exit the roundabout.

Was this review help?
19
1
Share
AustinFitz
08/10/25 5:58pm

As a veteran driver who frequently takes long-distance trips, I think the rules for turn signals at roundabouts are actually quite simple. Before entering the roundabout, you should turn on your left turn signal to indicate to other vehicles that you're turning left into the circular roadway. When driving straight or turning within the roundabout, no signal is needed as long as you're not changing lanes. The most crucial point is when preparing to exit the roundabout - remember to activate your right turn signal in advance, typically starting to signal when you reach the exit before your target exit. Additionally, pay special attention at multi-lane roundabouts: vehicles going straight should use the middle lane for safety, right-turning vehicles should use the outer lane, and left-turning vehicles should use the inner lane. Before exiting, always check your right-side mirror to confirm it's clear before changing lanes to exit. Be extra cautious when driving roundabouts in rainy conditions - with poor visibility and slippery roads, you should signal even earlier.

Was this review help?
15
3
Share
Expand All
VonMaya
09/23/25 6:06am

I've been commuting by car for five years, passing through two roundabouts daily. Personal experience shows: proper use of turn signals significantly reduces roundabout accidents. Turning on the left signal when entering a roundabout is like saying 'I'm coming in,' prompting vehicles inside to slow down and yield. Generally, no signaling is needed while driving within the roundabout, except when changing lanes. About 50 meters before exiting, the right turn signal must be activated and maintained throughout the entire exiting process. A common mistake among beginners is turning off the signal immediately after activating it, leaving trailing vehicles no time to react. Another often-overlooked detail: extra caution is needed when navigating roundabouts at night—it's advisable to turn on low beams early to make turn signals more noticeable. Just last week, I encountered a car that suddenly darted out without signaling, forcing me to brake hard and nearly causing a rear-end collision.

Was this review help?
13
3
Share
Expand All
AshlynDella
11/06/25 8:21am

I just got my driver's license, and the instructor repeatedly emphasized the roundabout turn signal rules: signal left when entering and right when exiting. Timing the right signal is particularly crucial—signaling too early may mislead following vehicles, while signaling too late is as good as not signaling at all. Generally, it's best to start signaling right before the exit prior to your target exit. Changing lanes within a roundabout requires signaling in advance, just like on regular roads. For multi-lane roundabouts, choose the correct lane: use the outer lane for the first exit, the middle lane for the second exit, and the inner lane for the third exit. Most importantly, slow down to below 30 km/h before entering the roundabout and watch for vehicles approaching from the left. When exiting, also be mindful of bicycle lanes, as many electric bikes can appear suddenly.

Was this review help?
7
3
Share
Expand All
More Forum Discussions

What are the design flaws in the clutch of the Yusheng 330 manual transmission?

Changan's warranty period is 2 years or 60,000 kilometers, which includes both a time limit and a mileage limit. Once either of these two conditions is met, it indicates that the vehicle's warranty has expired, and any subsequent normal maintenance or repairs will not be covered for free. During the warranty period, not all repair costs will be waived. It depends on the free items specified by the manufacturer during the warranty period. The car warranty refers to the period during which the car manufacturer promises to provide free repairs and maintenance for faults caused by quality issues when selling the product to consumers. In fact, the car warranty does not mean that the owner can repair or replace parts at will. The warranty contract usually specifies different scopes, such as warranty for important components, large parts, comprehensive warranty, and full warranty. Here are the items for car maintenance: Replace engine oil, oil filter, clean the air filter, and check whether the generator belt and wiper blades are damaged; Check whether the tire pressure is normal and whether the tires have uneven wear, bulges, or damage; Inspect the car chassis, including the brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; Check all switches and lights to ensure they are functioning properly.
11
2
Share

How to Pair Honda HFT Car Bluetooth?

Turn on both the mobile phone Bluetooth and the car Bluetooth, and make sure they are in discoverable mode; On the mobile phone's Bluetooth interface, click "Search for Devices" to find the car Bluetooth; Select the car Bluetooth displayed on the mobile phone, and click to set up pairing for the car Bluetooth. At the same time, click "Pair" on the car Bluetooth interface to complete the pairing. For subsequent use, simply turn on the mobile phone Bluetooth, and it will automatically connect to the vehicle by default.
14
2
Share

How to Rent a WM Motor Vehicle?

To understand the rental procedures, including the required documents and the lessee's qualifications. It is necessary to select an appropriate car rental contract. After choosing the desired vehicle model, you can sign the relevant rental contract to prevent unexpected situations. After signing the rental contract, you should inspect the vehicle to determine if it suits your needs.
13
4
Share

How to reset the tire pressure on Baojun E100?

Turn the ignition switch to the ON position to illuminate all dashboard indicator lights, then locate the directional control buttons on the steering wheel. Press any one of the directional control buttons (up/down) on the steering wheel. After completing the tire pressure reset operation, turn off the engine and restart it. The dashboard will then display a successful tire pressure reset.
6
2
Share

How to Turn Off the Built-in Navigation Prompts in BMW?

You can disable the voice prompts by locating the voice prompt option on the navigation map interface and unchecking or closing it. Simply look for the speaker-like icon to perform the operation. If you cannot find the option to check/uncheck "Voice Prompts" on the map interface, try entering the "Settings" menu to locate it. If you still cannot find the "Voice Prompts" option in the above locations, click into "Settings" and then select "Destination Guidance Settings."
16
1
Share

How to use the manual mode in a semi-automatic transmission?

Drivers can freely select the appropriate gear in manual mode, experiencing a sensation similar to driving a manual transmission vehicle. When the gear is shifted into D mode, pushing it to the left will engage the manual mode. Pushing towards the + symbol will upshift, while pushing towards the - symbol will downshift, with corresponding displays appearing on the instrument panel.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.