How to Use Toyota Windshield Wipers?

What does it mean when the EPC light is on in a vehicle?

The EPC indicator light can illuminate in two scenarios: during the power-on self-test and under other circumstances. The power-on self-test is a diagnostic check of all vehicle sensors before driving. Typically, if the engine is not started, the light will turn off by itself after about 3 seconds. If the EPC light remains on after starting the vehicle or illuminates under other conditions, possible causes include faults in the engine intake system, throttle body, fuel system, engine, ECU control unit, or brake lights. Below is a detailed explanation of the reasons for the EPC light illuminating under other conditions: Engine intake system fault: The EPC light may come on if the engine intake is obstructed or insufficient. Throttle body fault: Carbon buildup is a common issue with the throttle body. Additionally, dirt accumulation can affect airflow, triggering the indicator light. Fuel system fault: Issues such as substandard fuel, fuel deterioration, or poor fuel atomization can cause the light to illuminate. Engine fault: Insufficient engine pressure or problems with components like the intake valves may also trigger the EPC light. ECU control unit fault: Interference with the vehicle's computer signals or false alarms from the computer can lead to the light turning on. Brake light fault: Malfunctions such as non-functioning brake lights, faulty brake switches, or brake circuit issues can cause the EPC light to illuminate. Solutions for when the EPC light is on: Address intake system faults, use the correct fuel grade, and clean the throttle body. Remove carbon deposits from relevant components. Re-flash the ECU with updated data. If the EPC light comes on, the driver can first try turning off the engine and restarting it to see if the light remains on. If it does not, the issue may have been temporary. If the light stays on or frequently illuminates, the vehicle should be taken to the nearest service center for professional diagnosis and repair to eliminate potential safety hazards. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system primarily includes controllers and sensors related to the powertrain. When sensor data deviates from normal values, the EPC system takes predefined actions to regulate the powertrain. Common EPC indicator lights are typically displayed in two colors: yellow and red. A yellow EPC fault light indicates that the vehicle can still be driven, but it should proceed slowly to a repair facility. A red EPC fault light signifies a more serious issue, and the driver should pull over immediately and contact a repair professional. Continuing to drive with a red EPC light can damage core components or compromise safety.

3

2

Share

What does ETC stand for?

ETC is the abbreviation of Electronic-Toll-Collection, which translates to electronic non-stop toll collection (electronic toll collection) in Chinese. It is an automatic toll collection system for highways or bridges. According to the State Council's regulations, starting from 2020, vehicles without ETC will not enjoy toll discounts. In the future, highway toll stations will only retain one manual lane, and tolls can only be paid through the manual channel. During free holiday periods, vehicles can still use the highway. For users who have installed ETC, passing through ETC lanes will not incur charges. ETC's toll deduction principle: There will be one or more ETC lanes on the highway. Through dedicated short-range microwave communication between the vehicle-mounted electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane of the toll station, computer networking technology is used to settle accounts with banks in the background. This achieves the goal of vehicles not needing to stop at road and bridge toll stations to pay tolls, all based on the principle of passing first and deducting fees later. Benefits of installing ETC: Time-saving: Eliminates the hassle of queuing and waiting; Green and environmentally friendly: Green and low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: Saves costs, reduces the frequency of vehicle starts and brakes, and lowers wear and fuel consumption; Improved efficiency: The efficiency of passing through ETC lanes can theoretically increase by 2-3 times or more, making traditional ETC newer, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key urban clusters will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased." It also explicitly set the goal in the main indicators of comprehensive transportation development during the "13th Five-Year Plan" that "by 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the usage rate of ETC passenger vehicles, the future will also promote the use of ETC for trucks and explore the deep integration of the ETC system with smart transportation development directions such as vehicle-to-vehicle communication and vehicle-road coordination. This will provide car owners with comprehensive travel services, meaning more application scenarios will support ETC applications. ETC usage precautions: The ETC transaction sensing area is 8 meters. When encountering a vehicle in front stopping, to prevent the vehicle in front from having a faulty ETC device or no ETC device at all, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic sensing and paying for the vehicle in front. The recognition speed for passing through ETC lanes is 20 km/h. If the speed is too fast, the vehicle's device information cannot be read, and toll deduction will fail. Unauthorized removal or movement of the OBU device, or detachment or loosening of the ETC electronic tag, will cause the electronic tag to fail. It can be sent to the bank where the ETC card was issued or the highway service office for testing. If the loosening or detachment is not due to human factors, it only needs to be reactivated. When using a debit card bound to ETC, insufficient balance will also cause toll deduction to fail. Follow the guidance of on-site staff to use the manual MTC lane and pass by paying cash or swiping a card. Excessive thickness of the car's windshield can cause poor sensing. This is especially important for vehicles that have had their windshields replaced after accidents or for those who have modified their front windshields.

12

2

Share

How to Solve the Problem of ABS Pump Continuously Making Noise?

Replace the ABS assembly. Below is a detailed introduction about the ABS pump: 1. Introduction: The Anti-lock Braking System (ABS) is designed to automatically control the braking force during vehicle braking, preventing the wheels from locking up and maintaining a state of rolling and sliding (with a slip ratio of about 20%), ensuring maximum adhesion between the wheels and the road surface. 2. Function: The ABS enhances the safety factor of emergency braking while driving. In other words, vehicles without ABS are more prone to wheel lock-up during emergency braking, which means the steering wheel cannot be turned, thereby increasing the risk and potentially leading to severe consequences.

19

2

Share

Is the Corolla compliant with China 5 or China 6 emission standards?

All 2019 Corolla models comply with the China 6 emission standard, while all 2018 Corolla models meet the China 5 emission standard. The 2019 Corolla is a compact family car featuring a new design concept that gives it a more youthful and stylish appearance. The front section showcases the classic Toyota emblem in different colors, and the headlights adopt a popular through-type design. The 2018 Corolla was developed using the family's TNGA modular platform. Benefiting from the TNGA platform's high rigidity and lightweight characteristics, it delivers excellent handling performance while offering a very spacious interior.

6

1

Share

How to Install Welcome Lights on a Corolla?

Installation steps for Corolla welcome lights: 1. Remove the door panel; 2. Drill a small hole on the bottom surface of the door panel using a screw drill; 3. Fix the welcome light onto the door panel; 4. After securing the welcome light, connect the power wires to the positive and negative terminals of the door light, then test the welcome light functionality after powering the vehicle; 5. Reattach the door panel after successful testing. Welcome lights represent a new generation of eco-friendly vehicle lighting that projects images onto the ground by refracting LED light through film sheets and lenses. The LED light source incorporates advanced constant current control technology, delivering rich color saturation with advantages including zero pollution, noise-free operation, and absence of electronic interference.

14

1

Share

At how many kilometers should the second car maintenance be performed?

The second car maintenance should be performed at around 10,000 kilometers. Here are the relevant details: 1. Definition: The secondary maintenance of a vehicle refers to inspection and adjustment-centered maintenance operations performed on motor vehicles that have traveled a certain mileage. 2. Maintenance scope: Inspect and adjust the working conditions of the engine and electrical equipment, dismantle and clean the oil pan and oil filter, inspect and adjust the steering and braking mechanisms, dismantle and clean the front and rear wheel hub bearings, add lubricating oil, dismantle and inspect the tires, and perform tire rotation. 3. Maintenance purpose: Maintain various components, mechanisms, and assemblies of the vehicle to ensure they have good working performance and normal operation.

14

0

Share

How to Use Toyota Windshield Wipers?

What does it mean when the EPC light is on in a vehicle?

What does ETC stand for?

How to Solve the Problem of ABS Pump Continuously Making Noise?

Is the Corolla compliant with China 5 or China 6 emission standards?

How to Install Welcome Lights on a Corolla?

At how many kilometers should the second car maintenance be performed?

What are the tips for car polishing?

Which city does the license plate 'Ji D' belong to?

What is the actual fuel consumption of the KX1 automatic transmission?

What is the fuel consumption of the Binyue?