How to use the ZONE button in the car?

1 Answers
SanHadley
07/30/25 4:38am
How to use the ZONE button in the car: After pressing this button, the driver will uniformly control the air conditioning system in each zone of the car. The zoned air conditioning must be automatic air conditioning, otherwise, zoned adjustment would not be possible. ZONE refers to the temperature zone control of the air conditioning, which can provide a more comfortable riding environment for the driver and passengers, designed for passengers with different temperature needs. It allows setting different air conditioning temperatures and airflow for different areas inside the car. When the ZONE switch light is on, it indicates that the rear air conditioning is controlled by the rear control panel. When the switch light is off, it means all air conditioning is uniformly controlled. The working principle is to increase the air conditioning dampers, dividing the air ducts into finer and more sections, which are then sent to different pipeline zones after passing through several mixing dampers. Each zone is controlled by multiple independent controllers.
Was this review help?
19
5
Share
More Forum Discussions

How to Replace the Battery in a Tiida Car Key?

To replace the battery in a Tiida car key, follow these steps: 1. Remove the spare mechanical key; 2. Pry open the key along the shell gap; 3. Take out the old battery and replace it with a new one. Taking the 2021 Tiida as an example, it belongs to the compact car category with body dimensions of 4393mm in length, 1766mm in width, and 1539mm in height, a wheelbase of 2700mm, a fuel tank capacity of 50 liters, and a curb weight of 1180kg. The 2021 Tiida features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122PS, a maximum power of 90kW, and a maximum torque of 155Nm, paired with a 5-speed manual transmission.
14
1
Share

How to Interpret Traffic Lights for Left Turns and U-turns?

When the left-turn direction indicator (left-turn red arrow light) is off, vehicles making a left turn (including U-turns) should proceed according to the instructions of the main traffic signal (circular light). This means that when making a left turn or U-turn, there is no need to wait for the 'left-turn green arrow light' to give the command. Once the vehicle enters the guiding lane, it can proceed as long as the 'straight green light' is on. Precautions for U-turns: Vehicles should make U-turns based on the left-turn lane signal light instructions without affecting the normal driving of other vehicles. If making a U-turn at an intersection with a left-turn waiting area, you can first enter the left-turn waiting area when the straight green light is on and wait until the left-turn green light comes on before making the U-turn. Conditions under which U-turns are allowed: There is a U-turn signal light or sign: When there is a U-turn signal light at the intersection, a U-turn can be made when the U-turn indicator light is green; when there is a U-turn sign at the intersection or a U-turn indicator on the lane, a U-turn can be made while ensuring the safety of yourself and others. U-turns are allowed at dashed lines: Whether it's a white dashed line or a yellow dashed line, U-turns are permitted. If it's a double yellow line with one solid and one dashed, check whether your side is the dashed line. If it is, you can make a U-turn while ensuring safety; if it's a solid line, U-turns are not allowed. If you encounter a double yellow line with one solid and one dashed at an intersection, you can make a U-turn on the dashed line side, but you must not cross the stop line ahead. U-turns are allowed at yellow grid lines: Parking is prohibited in yellow grid line areas, but as long as there is no central barrier, you can make a U-turn here after yielding to normally moving vehicles. U-turns are allowed on the dashed side of a green belt: When the front of the green belt is a dashed line, vehicles on that side can make a U-turn from there. When the front of the green belt is a solid line, vehicles must follow the traffic signal instructions, cross the zebra crossing before making a U-turn, and are prohibited from making a U-turn by crossing the solid line or the zebra crossing.
7
5
Share

Where is the fuse box located in an Audi A4?

The fuse box in an Audi A4 is located on the right side of the front passenger seat. Simply open the fuse box cover on the passenger side to access it. Taking the 2020 Audi A4 as an example, it is classified as a mid-size sedan with the following dimensions: length 4858mm, width 1847mm, height 1439mm, wheelbase 2908mm, fuel tank capacity 56 liters, and curb weight 1615kg. The 2020 Audi A4 features a five-link independent suspension in both the front and rear, and is equipped with a 2.0L turbocharged engine delivering a maximum horsepower of 190PS, maximum power of 140kW, and maximum torque of 320Nm. It is paired with a 7-speed dual-clutch transmission.
4
1
Share

What are the differences between the 2018 Camry and the 2019 Camry?

The differences between the 2018 Camry and the 2019 Camry are: 1. Different fuel tank capacity: The 2018 Camry has a fuel tank capacity of 50 liters; the 2019 Camry has a fuel tank capacity of 49 liters. 2. Different curb weight: The 2018 Camry has a curb weight of 1660 kg; the 2019 Camry has a curb weight of 1665 kg. Both the 2018 Camry and the 2019 Camry have the same body dimensions: length 4900 mm, width 1840 mm, height 1455 mm, wheelbase 2825 mm, fuel tank capacity 49 liters, curb weight 1650 kg, and are equipped with a 2.5L naturally aspirated engine.
18
3
Share

What are the symptoms of insufficient engine oil?

The symptoms of insufficient engine oil are: 1. Increased noise; 2. Accelerated engine wear; 3. Abnormal vibration and reduced power; 4. Increased fuel consumption. Engine oil plays roles in lubricating and reducing friction, assisting in cooling, sealing against leaks, preventing rust and corrosion, and cushioning shocks. Effects of overfilling engine oil: 1. Impacts engine performance; 2. Causes carbon buildup; 3. Oil additives may reduce the conversion efficiency of the catalytic converter. Precautions for changing car engine oil: 1. Drain oil when hot for better fluidity; 2. Fill to the dipstick mark; 3. Select oil based on driving conditions, frequency, and engine requirements.
10
2
Share

What is the battery model for the Geely GL key?

Geely Emgrand GL's key battery is the CR2025 model with a capacity of 3V. There are two types of battery models used in cars, namely CR2016 and CR2025. Below is the relevant introduction of Geely Emgrand GL: Dimensions: A compact car under Geely Automobile, with body dimensions of 4725mm in length, 1802mm in width, and 1478mm in height, and a wheelbase of 2700mm. Power: Geely Emgrand GL is equipped with a 1.5T three-cylinder turbocharged engine and a 1.4T four-cylinder turbocharged engine, with maximum power outputs of 177 horsepower and 141 horsepower respectively, and maximum torques of 255 Nm and 235 Nm respectively. It is paired with three types of transmissions: 6-speed manual, CVT continuously variable transmission (simulating 8-speed), and 7-speed dual-clutch.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.