How to use the wireless charging in BMW 5 Series?

2 Answers
JocelynDella
07/23/25 7:50pm
To use the wireless charging in BMW 5 Series, follow these steps: There is a wireless charging pad located in front of the gear shift lever. After powering on the car, simply place your wireless charging-compatible phone on the charging pad to start charging. Wireless charging in cars can avoid safety hazards such as electric leakage and power loss. By adopting wireless charging, the power source and transformer can be concealed underground, allowing the car to charge at designated parking spots or special charging points on the street. The BMW 5 Series is a mid-size luxury sedan under the BMW brand, with dimensions of 4998mm in length, 1901mm in width, and 1559mm in height, and a wheelbase of 3108mm. The car is equipped with two types of engines: a low-power version 2.0-liter turbocharged engine and a high-power version 2.0-liter turbocharged engine. Both engines feature direct fuel injection technology and use aluminum alloy cylinder heads and blocks.
Was this review help?
8
0
Share
SanEvan
08/10/25 5:58pm
I've been driving a BMW 5 Series for over half a year and use the wireless charging feature frequently. The charging pad is located in the small recess at the front of the center armrest. To use it, simply place your wireless charging-compatible phone screen-side up. If your phone has a thick case or metal stand, it may affect charging efficiency, so it's recommended to remove the case before charging. Make sure to align the phone properly with the charging area, otherwise it won't charge. The indicator light turns on when the vehicle starts, showing it's working, and automatically powers off when the engine stops, requiring no action. If you receive a call while driving, avoid grabbing the phone directly—press the disconnect button on the central control screen first to prevent potential coil damage. While the charging speed isn't as fast as wired charging, it's sufficient for emergencies. On long trips, pairing it with seat ventilation makes for a truly comfortable experience.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

How to Turn On the Buick Encore Headlights?

Low beam and high beam are referred to as car headlights. Simply turn the Encore's light switch to the low beam position, and the low beam will illuminate. For daily driving, turning on the low beam is sufficient to meet the needs. However, there are exceptions. If there are no streetlights on the roadside or the road is straight and distant with poor visibility, please use the high beam. Below is a detailed introduction to low and high beams: 1. The high beam is generally activated by pushing the lever forward or pulling it inward. Pushing it forward keeps the high beam continuously on, while pulling it inward briefly flashes the high and low beams. When using the high beam, it is essential to turn it off when encountering oncoming traffic and only reactivate it after passing, to avoid dazzling the other driver's vision and causing accidents. This is also a standard of civilized driving. 2. The car light switch is mostly integrated into the lever-type switch on the left side of the steering wheel, though there are exceptions—some models feature a rotary knob switch. By turning or pushing the switch to the designated position, the corresponding exterior lights will illuminate, and the dashboard will display the corresponding indicator.
1
3
Share

How Often Should the Transmission Fluid in a Compass Be Changed?

The automatic transmission fluid in a Compass should be changed every 80,000 kilometers. Transmission fluid serves the functions of cooling, lubricating, and transmitting power within the transmission. Many transmission shift control mechanisms rely on transmission fluid to operate. If the transmission fluid is not changed for an extended period, it can lead to malfunctions in the shift control mechanism. Torque converter transmissions are connected to the engine via the torque converter, which is filled with transmission fluid. In such transmissions, the fluid also plays a role in power transmission. When changing the transmission fluid, it is necessary to replace the transmission fluid filter and clean any metal shavings from the transmission oil pan. There are two methods for changing transmission fluid: the gravity drain method and the machine flush method. It is recommended to use the machine flush method. Although this method is more expensive, it removes more of the old transmission fluid, resulting in a cleaner and more thorough replacement. When purchasing transmission fluid, opt for the manufacturer's original transmission fluid. Original transmission fluid undergoes rigorous testing by the manufacturer and can meet the transmission's needs under various operating conditions. The replacement intervals for transmission fluid may vary slightly between different vehicles, so owners should refer to their vehicle's maintenance manual.
4
5
Share

What to Do If You Lose Your Magotan Car Key?

If you lose your Magotan car key, you can go to two places to get a replacement. One option is to visit a 4S dealership, and the other is to go to an auto parts market. There are differences in price, with the 4S dealership offering better security and professionalism, while the auto parts market is cheaper but has some drawbacks. Below are detailed introductions to both methods: 1. The first method is to visit a 4S dealership to get a replacement key. The staff at the 4S dealership will generally find the corresponding key code based on the car model, then deactivate the lost key code, and finally issue a new key code. Even if the lost key is found, there is no need to worry. 2. The second method is to go to an auto parts market to get a replacement key. However, getting a key at an auto parts market carries some security risks for the car. The auto parts market only duplicates the key code. On the other hand, the cost of getting a key at an auto parts market is several times cheaper than at a 4S dealership. Each option has its own advantages and disadvantages.
9
5
Share

Where is the drain port of the Skoda Octavia radiator?

Skoda Octavia radiator drain port is located at the bottom of the radiator. The following is the relevant introduction of the Skoda Octavia radiator: 1. Lift the vehicle and disconnect the hose to drain the water. 2. The car radiator generally refers to the car radiator. 3. The radiator belongs to the car cooling system. The radiator in the engine water cooling system consists of three parts: the water inlet chamber, the water outlet chamber, the main piece and the radiator core. The steps to add water to the car radiator are as follows: 1. Turn the pressure cap counterclockwise. If you hear a hissing sound, wait until the sound disappears before opening. 2. Add an appropriate amount of coolant to the coolant expansion tank to reach the position between the MAX and MIN marks of the expansion tank. 3. Start the engine with the coolant expansion tank cap open. 4. After starting the engine, the coolant in the tank will slowly decrease. At this time, add an appropriate amount of coolant to the expansion tank until the liquid level reaches the position between the MAX and MIN marks of the coolant expansion tank. 5. Reinstall the cap, making sure the pressure cap is hand-tightened and fully seated.
3
2
Share

What kind of engine oil is best for the new Bora?

The Volkswagen Bora originally uses semi-synthetic engine oil with the specification SM-5W-40, which is considered good. Methods to determine the quality of engine oil are: 1. Hand-rubbing method: Rub the lubricating oil repeatedly between the thumb and index finger. Good lubricating oil should feel smooth, with minimal debris and no friction. If you feel significant friction like sand particles between your fingers, it indicates the lubricating oil contains many impurities and should be replaced with new oil. 2. Light inspection method: Use a screwdriver to lift the lubricating oil at a 45-degree angle to the horizontal plane. Compare it under sunlight. Under light, you can clearly see if the lubricating oil is free of debris, which is good and can continue to be used. If there is excessive debris, the lubricating oil should be replaced. 3. Oil stain method: Take a clean white filter paper and drop a few drops of oil on it. After the lubricating oil seeps through, if there are black powders on the surface and it feels rough to the touch, it means the lubricating oil contains many impurities. Good lubricating oil will have no powders, feel dry and smooth to the touch, and leave a yellow stain.
13
2
Share

Reasons Why the Steering Wheel is Still Off-Center Despite Proper Wheel Alignment

The reasons why the steering wheel is still off-center despite proper wheel alignment are as follows: 1. Uneven tire pressure between the left and right wheels on the same axle. Check the tire pressure of all front and rear wheels and adjust the pressure of the left and right tires on the same axle to be balanced. 2. Uneven length of the left and right shock absorbers on the same axle, or issues with the shock absorbers and coil springs, which can often cause the vehicle to pull to one side. In this case, it is necessary to visit a professional auto repair shop to fix the shock absorbers promptly. 3. Poor separation of the brake on a certain wheel can also cause the steering to pull to one side. This is equivalent to one wheel constantly applying partial braking, which will inevitably cause the vehicle to drift. Immediate repair is also required in this situation. 4. Overall deformation of the vehicle frame. If the wheelbase difference between the two sides is too large and exceeds the maximum allowable range, it can be measured with a tape measure. If it exceeds the range, it must be corrected using a frame straightening machine.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.