···
Log in / Register

How to Use the Wiper on Haval H6?

4 Answers
McArya
08/30/25 2:56am
Haval H6 wiper usage method is: 1. Enter the driver's compartment to locate the vehicle wiper position; 2. The OFF position turns off the vehicle wiper; 3. The MIST position is for a single wiper action; 4. The AUTO position is for automatic wiper operation; 5. Pushing the wiper lever to the LOW position activates low-speed wiper operation. The Haval H6 is a compact SUV with body dimensions of: length 4653mm, width 1886mm, height 1730mm, wheelbase 2738mm, tire specification 225/55R19, and minimum ground clearance of 180mm.
Was this review help?
9
1
Share
VanStephanie
09/11/25 7:04am
Hey, the first time I drove a Haval H6, I found the wiper operation simple and practical. The control stalk is on the right side of the steering wheel. A gentle push upwards activates a single wipe, perfect for occasional raindrops; pulling it down offers different modes: one notch down for intermittent wiping (adjustable via the rotary knob), followed by low-speed wiping, and finally high-speed wiping for heavy rain. Remember, lifting the stalk sprays washer fluid and activates the wipers—a crucial feature since a dirty windshield compromises visibility. A few practice runs help familiarize the positions. Always test the wiper rhythm before driving in rain to avoid fumbling. Regularly inspect wiper blades for wear; replacing aged blades enhances safety. The thoughtful design ensures even beginners can master it quickly.
Was this review help?
17
2
Share
Expand All
SanBrayden
10/25/25 7:56am
As a seasoned driver with decades of experience, the Haval H6's wipers are both user-friendly and reliable. The control stalk on the right side of the steering wheel has clear detents when pulled down: first click for intermittent mode (adjustable via rotary knob), second for low speed, and third for high speed. Pushing it up triggers a single wipe. Pro tip: intermittent mode works best for urban rain, while high-speed mode is essential for highway downpours—don’t hesitate to switch. Lift the stalk to activate washer jets, but keep nozzles clean to prevent clogs. Always stock up on washer fluid and inspect blades for cracks before winter; worn blades reduce visibility and increase accident risks. These small but crucial practices ensure safer, worry-free driving.
Was this review help?
1
2
Share
Expand All
CharlotteDella
12/08/25 8:18am
Driving with kids, the Haval H6's wiper operation is straightforward and safe. The control stalk is right next to the steering wheel - push up for a single swipe, pull down for three modes: intermittent, low speed, and high speed. I often use the intermittent mode at a suitable speed for urban rain and fog. Before setting off in rain, always test the washer spray to ensure clear visibility. Regular checks on wiper blade condition are advised - replace immediately if worn, don't skimp on this.
Was this review help?
10
5
Share
Expand All
More Forum Discussions

Can CarPlay Project Videos?

CarPlay cannot project videos. Here is relevant information: Introduction to CarPlay: CarPlay is an in-car system released by Apple Inc. in the United States, which seamlessly integrates users' iOS devices and iOS user experience with the dashboard system. CarPlay only supports iPhones with a Lightning interface. Although iPads now support this interface, Apple has not listed iPads as hardware devices supported by CarPlay. WWDC: On June 13, 2016, at the WWDC developer conference, Apple announced that its smart car system CarPlay would be updated alongside iOS 10, becoming the perfect partner for the new version of Apple Maps and Siri.
5
4
Share

Where is the Sienna tire pressure reset button located?

Sienna's tire pressure reset button is located below the dashboard on the driver's side. The tire pressure monitoring system measures tire pressure through pressure sensors, then wirelessly transmits the pressure data from inside the tire to a central receiver module for display. The Sienna is a Toyota-branded MPV with the following dimensions: length 5105mm, width 1966mm, height 1750mm, and a wheelbase of 3030mm. It is equipped with a 3.5L naturally aspirated engine producing maximum power of 196kW at 6200rpm and peak torque of 322Nm at 4700rpm.
16
5
Share

Can You Continue Turning When the Red Light Comes On in the Waiting Zone?

If you have already entered the left-turn waiting zone and crossed the stop line when the light is green, you can continue turning even when the light turns red. Below is relevant information: Green Light: When the green light is on, vehicles are allowed to proceed, but turning vehicles must not impede the passage of through vehicles or pedestrians. Yellow Light: When the yellow light is on, vehicles that have already crossed the stop line can continue to proceed. Red Light: When the red light is on, vehicles are prohibited from proceeding. Special Cases: At intersections without dedicated non-motorized vehicle or pedestrian signals, non-motorized vehicles and pedestrians should follow the motor vehicle traffic signals. When the red light is on, right-turning vehicles may proceed if they do not impede the passage of other vehicles or pedestrians.
10
3
Share

What is an Engine Overhaul?

An engine overhaul refers to the replacement of major internal components and the changing of engine oil and filters. The main components include: crankshaft, pistons, connecting rods, cylinder liners, valve assemblies, piston rings, piston connecting rods, valve seat rings, crankshaft connecting rods, piston rings, timing belts, rear crankshaft oil seals, and front transmission oil seals. Precautions after an engine overhaul are: 1. Avoid high RPMs; 2. Warm up the engine before driving when cold starting; 3. Follow load capacity regulations; 4. Avoid sudden acceleration and hard braking; 5. Pay attention to gear changes and avoid driving in a single fixed gear for extended periods; 6. Change the engine oil as soon as possible after the break-in period.
4
2
Share

Are Motorcycles Allowed on Highways?

According to the National Road Traffic Safety Law, there is no explicit prohibition against motorcycles on highways. Except in regions where motorcycles are explicitly banned from highways, motorcycles can access highways if they meet the following conditions. Here are the relevant details: Helmet: Riders must wear a helmet when operating a motorcycle, and no passengers or cargo are allowed except for the driver. Right-side driving: The speed of a motorcycle must not exceed 80 kilometers per hour, and it must stay on the right side of the road with a speed maintained between 70km/h to 80km/h. License: A valid driver's license is required for motorcycles on highways.
3
0
Share

What is the recommended waxing cycle for cars?

Car waxing cycle is approximately 2 to 3 months, adjusted based on driving environment and parking conditions. The functions of car waxing include: 1. Waterproofing and acid rain protection, reducing water droplet adhesion on the car body; 2. The wax film can reflect some light, effectively preventing paint aging; 3. Reducing friction between the car body and air/dust, preventing static electricity; 4. Enhancing paint gloss and restoring brilliance; 5. Light scratches can be polished with wax. Precautions for car waxing: 1. Thoroughly clean dirt and dust from the car surface before waxing; 2. Wax in a shaded area to avoid body heat; 3. Completely remove wax residue to maintain aesthetics.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.