How to use the wiper of Haval H6?
4 Answers
Haval H6's wiper usage is as follows: 1. The wiper of Haval H6 is located on the right side of the steering wheel. By moving it up and down or back and forth, you can operate the wiper functions, adjusting the front and rear wiper gears, frequency, and other performance. 2. Some models are also equipped with an 'automatic sensing' function, which adjusts the wiper speed according to the amount of rainfall, completely freeing your right hand from operating the wiper switch. OFF – The front wiper stops working. INT – It works automatically at intervals. LO – Continuous operation. HI – Continuous high-speed operation. The Haval H6 uses a rain sensor installed behind the front windshield to collect rainfall data. The computer then adjusts the wiper's movement speed based on the amount of rain on the glass. The automatic wiper can sense the size of raindrops through the rain sensor and automatically adjust the wiper's operating speed, providing the driver with a good view, thereby greatly improving the convenience and safety of driving in the rain.
As a frequent driver of the Haval H6, I can share some insights on operating the wipers. The wiper control stalk is located on the right side of the steering wheel. To use it, gently push the stalk downward once to activate the low-speed mode, suitable for moderate rain; push it again to switch to high-speed mode for heavy rain. If the rain is light, you can adjust the intermittent mode frequency by turning the small knob on the stalk, setting it to wipe every few seconds. The washer function is also simple—just pull the stalk toward yourself to spray windshield cleaner, and the wipers will automatically swipe a few times to clear any residue. I recommend testing the washer before driving in the rain to ensure a clean windshield. After several years of use, I’ve noticed that worn wiper blades can reduce effectiveness, so it’s best to check them every six months and replace them as needed. Always turn off the wipers when parked to save battery, and perform a wiper system maintenance check before the rainy season. Maintaining good habits ensures safer driving.
The operation of the Haval H6's wipers is quite intuitive. The control stalk is located on the right side of the steering wheel, and you need to operate it to switch between different modes. Pushing the stalk down one position activates the low-speed wiping mode, suitable for normal rainfall; pushing it further to the second position engages the high-speed mode for heavy rain or storms. The intermittent mode in the middle is adjusted by rotating the ring knob on the stalk, allowing you to set the interval between wipes. The washer function is activated by pulling the stalk toward the driver, and the wipers will automatically run a few times after release. If the wipers feel rough or noisy during operation, it may be necessary to clean the wiper arms or replace the wiper blades to prevent long-term damage to the windshield. The washer fluid reservoir is located in the engine compartment, and keeping it topped up regularly can improve cleaning efficiency. Proper operation not only makes daily use convenient but also reduces the risk of sudden malfunctions, ensuring safe visibility during rainy drives.
Using the wipers on a Haval H6 is not difficult. After getting into the driver's seat, look at the lever on the right side of the steering wheel. Push it down once to activate the low-speed mode, and the wipers will start working slowly; push it down again to switch to high-speed mode. When there's light rain, you can adjust the frequency of the intermittent action by turning the knob at the top of the lever. To use the washer function, pull the lever toward yourself, and it will spray washer fluid while the wipers move a few times. When I first started driving, I was always worried about making mistakes, but after a few tries, I got the hang of it. Use high-speed mode for heavy rain and intermittent mode for light rain. Remember to use the washer frequently to keep the windshield clean. The key to safe driving is maintaining clear visibility.
