How to Use the Windshield Wipers in a Car?
3 Answers
By pushing the control lever up and down, you can control the wiping state of the windshield wipers. If in the automatic adjustment mode, you can change the sensitivity of the rain sensor by rotating the adjustment knob, thereby adjusting the wiping frequency of the wipers. Below are detailed introductions about the windshield wipers: Working Principle: The motor on the windshield wiper drives the output through the worm gear on the armature shaft and then drives the output gear through the idler and idler shaft. The output arm connected to the wiper linkage is then manipulated by the output shaft. When the motor rotates, the output arm and linkage are driven to move back and forth. Main Function: The windshield wiper is a device used to wipe away raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety.
I've been driving for over a decade and know the wiper operations like the back of my hand. There's always a control stalk near the steering wheel—a gentle push down to the first position activates slow-speed wipers, perfect for drizzles; push again for medium speed, which works great in heavier rain; pushing all the way down engages high speed, essential during downpours. A light upward push or pull activates the washer fluid, spraying cleaner before wiping the windshield for better dirt removal. Remember, the first thing to do when driving in rain is turn on the wipers—never drive with poor visibility. Don't slack on maintenance either: wipe the wiper blades with a damp cloth every season, and replace them when the rubber wears out to ensure clear wiping and safety. There are even winter-proof wipers available to prevent freezing—mastering these makes driving much safer.
When I first got my driver's license, learning the wipers was super easy. There's always a lever on the right side of the steering wheel - moving it up and down controls the wiper speed: push down one notch for a leisurely swipe (perfect for light rain), push further for faster speeds to handle heavy downpours. The top usually has a button or pushing the lever upward activates the washer fluid - it sprays first then wipes for crystal-clear visibility. I've developed a habit of testing the wipers before driving to ensure they work properly. If they make strange noises, it's likely the rubber blades are worn and need replacement. Always remember to turn them on during rain or snow - maintaining clear visibility is crucial for safety. Don't repeat my rookie mistake of forgetting to activate them and nearly hitting something. Now operating them has become second nature.
