How to use the windshield washer fluid in Mercedes GLC?
3 Answers
Usage of Mercedes GLC windshield washer fluid: 1. Turn on the wiper switch to spray the washer fluid; 2. When the wiper nozzles stop spraying, add a small amount of new washer fluid at the washer fluid filler port; 3. Then turn on the wiper switch again to clear the remaining old washer fluid; 4. When the nozzles stop spraying for the second time, add approximately 4L of washer fluid solution, then securely close the washer fluid cap. The Mercedes GLC has body dimensions of 4764mm in length, 1898mm in width, and 1642mm in height, with a wheelbase of 2973mm. The Mercedes GLC features front-engine four-wheel drive (4WD) with a full-time 4WD system, and both front and rear suspensions use multi-link independent suspension.
I always top up the windshield washer fluid for my Mercedes GLC myself - it's super simple. Pop open the hood and locate the blue plastic reservoir (sometimes marked with a windshield wiper icon) on the left or front side. Unscrew the cap and pour the fluid slowly to avoid overflow. I use antifreeze-type fluid in winter to prevent freezing, and regular fluid suffices in summer. After refilling, close the cap securely. Start the engine and gently pull the right-hand stalk behind the steering wheel to activate the washers - make sure the spray nozzles are properly aligned without clogging. Checking fluid levels monthly is crucial; I always top up when low to maintain clear visibility during rain and prevent water pump damage. These small maintenance habits really optimize driving experience.
I've been driving for years, and the Mercedes-Benz GLC's windshield washer fluid operation is highly practical. The first step is to open the engine compartment, where you'll find a canister with a wiper symbol next to the engine. The cap is usually blue for easy identification—twist it open and pour in the fluid. A capacity of one liter is generally sufficient; avoid overfilling. Mercedes-Benz's thoughtful design makes it convenient. After refilling, I like to sit in the car and test the spray: gently push the lever below the steering wheel to check if the spray is even and unobstructed. The key is to use high-quality washer fluid to avoid impurities corroding the system. I recommend checking the fluid level during quarterly maintenance, especially switching to antifreeze type in winter to prevent cracking. During daily driving, simply press to spray and clean the windshield, ensuring clear visibility and enhanced safety.
