How to Use the Tire Pressure Monitoring System in MG ZS?

1 Answers
Connor
07/30/25 2:22am
In the MG ZS, you can check the tire pressure status via the tire pressure monitoring system displayed on the dashboard. The following details explain the tire pressure monitoring system: 1. Direct Tire Pressure Monitoring: The direct tire pressure monitoring system uses pressure sensors installed in each tire to directly measure the tire pressure. It then transmits the pressure information wirelessly from inside the tire to a central receiver module, which displays the tire pressure data for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. 2. Indirect Tire Pressure Monitoring: The indirect tire pressure monitoring system works by detecting when a tire's pressure drops, causing the vehicle's weight to reduce the rolling radius of that tire, which in turn makes it rotate faster than the other wheels. By comparing the rotational speed differences between the tires, the system monitors the tire pressure. The indirect tire pressure alert system essentially relies on calculating the tire's rolling radius to monitor pressure. If the system does not display numerical values when the ignition is turned on, it is an indirect tire pressure monitoring system, which only alerts when the tire pressure is below or above the standard value.
Was this review help?
11
0
Share
More Forum Discussions

Where is the hazard warning light switch located?

The hazard warning flasher, commonly known as the double flasher or emergency flasher, is activated by pressing a button marked with a red triangle symbol. Press once to turn on, and press again to turn off. Details about hazard warning lights are as follows: 1. When to use: When driving in dense fog with visibility below 100 meters, due to poor visibility, you should not only turn on the front and rear fog lights but also activate the hazard warning flasher. This alerts passing vehicles and pedestrians, especially those behind you, to maintain a safe distance and appropriate speed to avoid rear-end collisions caused by sudden braking. 2. Function: When activated, both front and rear turn signals will flash simultaneously. The hazard warning flasher serves two main purposes: to alert other vehicles in case of emergencies, and to prevent rear-end collisions when parked on the roadside by keeping the flashers on.
3
0
Share

What does a car hood with an exclamation mark mean?

There are three scenarios for the yellow triangle exclamation mark on the car dashboard: 1. Yellow triangle symbol: with an exclamation mark in the middle, this is the traction control indicator, also known as the ground adhesion control system indicator. When the traction control light is on, it alerts the owner to turn off the traction control system. If this light remains on, it indicates an issue with the traction system. 2. Yellow brackets: with an exclamation mark in the middle, this indicator is the tire pressure monitoring light. The tire pressure light being on indicates insufficient tire pressure. 3. Yellow gear: with an exclamation mark in the middle, this is the automatic transmission fault warning light, indicating a problem with the transmission or that the transmission lubricant is below the normal range, or the lubricant needs to be replaced.
5
3
Share

What brand of car has a ram's head logo?

A car logo resembling a ram's head belongs to Dodge (DODGE) vehicles, which is one of the three major automotive brands under the Chrysler Group. Here are some relevant details: 1. Dodge offers a range of models including sedans, sports cars, MPVs, SUVs, and crossover vehicles. Among these, the most renowned are the Dodge Viper and the Dodge Charger. The Viper, in particular, is an American-style supercar that has consistently adhered to the 1980s U.S. regulation where performance was determined by engine displacement. 2. Key Dodge models include the Dodge Caliber, Dodge Viper, Dodge Magnum, Dodge Ram, Dodge Caravan, and Dodge Charger. The Dodge Hellcat stands out as a remarkable representative of Dodge's muscle cars, combining speed, passion, and individuality with its bold appearance. The Hellcat is powered by a HEMI-6.2L-V8 supercharged engine, with a maximum horsepower rating of 797 HP.
5
1
Share

How Many Times to Press the Mercedes-Benz One-Button Start?

Mercedes-Benz one-button start requires two presses. The first press of the start button powers up the car, allowing it to perform a self-check. If no abnormalities are detected, you can press the start button a second time. Below are the precautions for using the one-button start: 1. Turning off the engine while driving: In case of an emergency while the vehicle is in motion, you can turn off the engine by pressing the engine start/stop button for more than 3 seconds or pressing it three times consecutively. At this point, the power will switch to ACC mode. 2. Starting the engine while driving: If the engine stalls while the vehicle is in motion, you can restart the engine without pressing the brake pedal by shifting the gear lever to N (neutral) position and pressing the engine start/stop button.
16
3
Share

What tires are recommended for the Audi A4L?

When the car first starts moving, the reasons for abnormal noises are as follows: 1. The car has not been used for a long time: The engine oil will return to the oil pan, meaning the top part of the engine, specifically the valve chamber, will have less oil. Because the valves lack the sealing and lubrication provided by the oil, abnormal noises can be heard from the bottom of the car when it first starts. This situation is normal. 2. Issues with the engine belt: Abnormal noises from the engine belt are usually due to the belt being dirty. Cleaning it with water or applying some lubricant can eliminate the noise. However, whether this solution is suitable for all car models requires further analysis.
19
2
Share

Should the driver align to the center when driving straight?

Each person has different reference points when driving straight. Below is relevant information: 1. Introduction: The driver's test is a qualification examination organized by the Vehicle Management Office of the Public Security Bureau. Only by passing the driver's test can one obtain a driver's license and legally operate a motor vehicle. 2. Content: The examination for motor vehicle drivers is divided into the following subjects: the subject on laws, regulations, and related knowledge of road traffic safety (also known as the 'theoretical test', abbreviated as 'Subject 1'), the subject on field driving skills (commonly known as the 'pylon test', abbreviated as 'Subject 2'), and the subject on road driving skills and safe, civilized driving knowledge (commonly known as the 'road test', abbreviated as 'Subject 3'). The examination content and passing standards are uniform nationwide, with corresponding examination items specified according to different types of vehicles eligible for driving.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.