How to Use the Three Modes of Camry?

1 Answers
VonPaige
07/29/25 10:46pm
The methods for using the three driving modes of the Camry are: 1. For urban driving, it is recommended to use the Normal mode; 2. For highway driving, it is recommended to use the Eco mode; 3. For climbing hills or overtaking, it is recommended to use the Sport mode. Taking the Camry 2021 2.0E Elite Edition as an example, this car is a 4-door, 5-seat sedan with dimensions of 4885mm in length, 1840mm in width, and 1455mm in height, and a wheelbase of 2825mm. The car is equipped with a 2.0L naturally aspirated engine and a CVT (simulating 10-speed) transmission, delivering a maximum power of 131kW, a maximum torque of 210Nm, a maximum horsepower of 178PS, and a top speed of 205km/h. The drivetrain is front-wheel drive, with a MacPherson strut front suspension and an E-type multi-link independent rear suspension. It features a unibody structure, a fuel tank capacity of 60L, and a trunk capacity of 593L.
Was this review help?
15
0
Share
More Forum Discussions

Where are the three major components of Hongqi developed?

Hongqi's chassis is independently developed by Hongqi, the transmission is developed by Aisin, and the engine is independently developed by Hongqi. The following is relevant information about Hongqi: 1. Introduction: Hongqi is a premium automotive brand directly operated by FAW. On January 8, 2018, FAW announced the new Hongqi brand strategy with the brand concept of "New Chinese Noble Refinement." On July 31, 2018, the 60th anniversary celebration of the Hongqi brand officially commenced. On October 23, 2018, Hongqi signed as the diamond partner of the 5th World Internet Conference. On January 29, 2019, FAW Hongqi officially established a strategic cooperation with the Palace Museum. On March 26, 2019, the Hongqi brand collaborated with violinist Yu Lina to co-produce the original musical theater "True Love · Butterfly Lovers." On July 12, 2019, the first Hongqi Carnival was successfully held. 2. R&D System: Currently, Hongqi has established an R&D system of "One Headquarters and Four Institutes," forming a global R&D layout of "Three Countries and Five Locations." Changchun is the R&D headquarters of the Hongqi brand, where the newly established Hongqi Styling Design Institute, New Energy R&D Institute, and Intelligent Connectivity Development Institute are located. In Beijing, the Forward-looking Technology Innovation Branch and Experience Perception Measurement Research Institute have been newly established; in Shanghai, the New Energy R&D Branch has been set up; in Munich, Germany, the Forward-looking Design Branch has been established; and in Silicon Valley, USA, the Artificial Intelligence R&D Branch has been newly established.
16
4
Share

How many questions are there in the driving license test subject one?

The driving license test subject one consists of 100 questions. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," it is divided into single-choice questions and true/false questions, with each question worth 1 point and a total score of 100 points. If 11 questions are answered incorrectly during the test, the system will automatically submit the paper and end the test. Subject one, also known as the theoretical test or driver theory test, is part of the motor vehicle driving license assessment. The test content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test is conducted on a computer and is time-limited, with a duration of 45 minutes. Subject one test content: Driving license and motor vehicle management regulations; Road traffic conditions and regulations; Road traffic safety violations and penalties; Road traffic accident handling regulations; Basic knowledge of motor vehicles; Local regulations; Knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; Special knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject one test precautions: During the test, students should pay attention to their attire—no slippers are allowed, and electronic devices and bags are prohibited in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in the locker before entering the examination room. Upon entering, the identity verification area will assign a seat. After finding your seat, begin the test. Ensure the camera is aligned with you and adhere to test discipline. If you fail the first time, there is a same-day retake. If you fail again, you must pay to reschedule. After the test, queue to collect your score report and sign it. Failure to sign will render the result invalid. There is no limit to the number of times you can reschedule the subject one test. Each subject test can be taken once, and if you fail, you can retake it once. If you do not take the retake or fail the retake, the test will be terminated, and the applicant must reschedule. In contrast, subject two and subject three have only five test attempts each. Subject two and subject three tests must be scheduled ten days apart. If you fail the subject three safe and civilized driving knowledge test, the previously passed road driving skills test scores remain valid. The driving test consists of three subjects: subject one, subject two, and subject three. Subject one refers to the road traffic safety laws, regulations, and related knowledge test; subject two refers to the field driving skills test; and subject three is divided into two parts: road driving skills and safe and civilized driving knowledge test. The safe and civilized driving knowledge test is conducted after subject three, so it is commonly referred to as subject four. However, the official terminology (i.e., the Ministry of Public Security Order No. 123) does not include the term "subject four."
9
1
Share

What is the passing score for C1 Subject 2?

The passing score for the C1 driver's license Subject 2 test is 80 points. The C1 Subject 2 test mainly consists of five items: reversing into a garage, parallel parking, curve driving, right-angle turning, and hill start and stop. Automatic transmission (C2) Subject 2 does not include hill start and stop. A C1 driver's license allows driving small and micro passenger vehicles, among others. C1 test has four subjects in total, and the other three subjects are as follows: Subject 1: Mainly tests basic knowledge of road traffic. Subject 2: Mainly tests reversing into a garage, parallel parking, curve driving, right-angle turning, and hill start and stop. Subject 3: Mainly tests 16 driving skills, including preparation before driving, starting, and straight-line driving. Subject 4: Mainly tests the requirements for safe and civilized driving operations, similar to Subject 1, it is a theoretical test. Subject 2 test tips: During the Subject 2 test, before driving, be sure to adjust the seat height, adjust the rearview mirror to ensure a wide field of vision, and fasten the seat belt. During the test, do not stop unless the voice prompts a failure. For parallel parking, remember to find the right angle, turn the steering wheel quickly, react promptly, and coordinate with the vehicle's speed. For hill start and stop, remember to pull the handbrake, turn on the left turn signal when starting, release the handbrake, stabilize the clutch, and coordinate the throttle and clutch to avoid stalling or rolling back. For right-angle turning, find the reference point before turning and coordinate with the vehicle's speed. For curve driving (S-curve), slow down. For reversing into a garage, control the speed, find the reference point, and make minor adjustments if there is any deviation observed in the rearview mirror. Subject 2 deduction items: Reversing into a garage: Vehicle body crossing the line, deduct 100 points, judged as failing; not completing the reversing, deduct 100 points, judged as failing; stopping midway, deduct 5 points each time; not completing the test within the specified time, deduct 100 points, judged as failing. Parallel parking: After the vehicle stops in the garage, the body crossing the line deducts 100 points, judged as failing; stopping midway, deduct 5 points each time; tires or body touching the curb line while driving, deduct 10 points; not completing the test within the specified time, deduct 100 points, judged as failing. Curve driving: Wheels crossing the road edge line, failing; stopping midway, failing; driving gear not in second gear or above, deduct 5 points. Right-angle turning: Wheels crossing the road edge line, failing; stopping midway, deduct 5 points each time. Hill start and stop: After the vehicle stops, if the front bumper or motorcycle front axle is not aligned with the pole line and exceeds 50cm, failing; exceeding the specified start time, failing; after the vehicle stops, if the front bumper or motorcycle front axle is not aligned with the pole line but does not exceed 50cm, deduct 10 points; after the vehicle stops, if the body distance from the road edge line exceeds 30cm but not 50cm, deduct 10 points. Not tightening the parking brake after stopping, deduct 10 points. C1 driver's license test passing standards: Traffic regulations and related knowledge—90 points to pass. Field driving—80 points to pass. Road driving—80 points to pass. Safe and civilized driving knowledge—90 points to pass.
1
0
Share

Is Manual Transmission Faster at Starting or Automatic Transmission?

Automatic transmission is slightly faster at starting than manual transmission. The differences between automatic and manual transmissions are as follows: 1. In terms of operation difficulty: Manual transmission mainly relies on the driver stepping on the clutch to complete gear changes; Automatic transmission mainly relies on the hydraulic transmission principle of the torque converter to automatically complete gear shifts. 2. In terms of safety: The neutral gear in manual transmission vehicles causes loss of power, posing safety hazards during driving; Automatic transmission vehicles cannot use neutral gear while driving, making them safer. Manual transmission refers to manually shifting the gear lever to change the gear meshing device inside the transmission, altering the gear ratio to achieve speed change. Automatic transmission means the driver does not need to shift gears manually, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions.
10
3
Share

How to Open and Replace the Battery in a Mazda 6 Key?

Below are the detailed steps to replace the battery in a Mazda 6 key: 1. First, locate the switch on the back of the key fob and pull the top part outward. After removing the internal metal mechanical key, you will see a small groove. 2. Use a flathead screwdriver or another tool to pry open the key cover along the groove. Once a gap appears, you can manually open it. 3. After opening the key cover, remove the old battery and replace it with a new one, paying attention to the battery's polarity. 4. Reattach the key cover and reinsert the mechanical key.
13
5
Share

How are motorcycles charged on highways?

Motorcycles are charged according to the standards for small cars, specifically the 5-seater vehicle category. Motorcycles must ride in the far-right lane and maintain a speed not exceeding 80 kilometers per hour. Below is relevant information about motorcycles: 1. Definition: A motorcycle is a two- or three-wheeled vehicle powered by a gasoline engine, steered by handlebars for front-wheel turning. It is lightweight, agile, fast, and widely used for patrol, passenger and cargo transport, as well as a sports equipment. 2. Classification: Motorcycles are broadly categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes, among others. It is important to note that motorcycles on highways must have a vehicle license, driver's license, and compulsory traffic insurance.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.