How to Use the Three Driving Modes of BMW 3 Series?

What is the fuel tank capacity of the 2019 Toyota Levin?

The 2019 Toyota Levin has a total of 20 models. Among them, the 1.2L versions have a fuel tank capacity of 50L, while the 1.8L versions have a fuel tank capacity of 43L. This data is officially released, and owners who have purchased the Levin can also check it on the vehicle's configuration sheet. The 2019 Toyota Levin uses 92-octane fuel. The 1.2L versions have a fuel consumption of 5.5 to 5.7L per 100 kilometers, allowing a full tank to cover a distance of 877 to 909km. The 1.8L versions have a fuel consumption of 4.1 to 4.2L per 100 kilometers, allowing a full tank to cover a distance of 1023 to 1049km. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are about 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is from the bottom of the tank to the safety limit, and there is still some space from the safety limit to the tank opening. This space ensures that the fuel in the tank can expand when the temperature rises without overflowing the safety space of the tank. If the fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the marked fuel tank capacity.

11

2

Share

What is the 0-100 km/h acceleration time of the Lynk & Co 03+?

According to official data, the Lynk & Co 03+ achieves a 0-100 km/h acceleration time of 5.9 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in faster acceleration. The Lynk & Co 03+ has a peak torque of 350 N·m, with its engine delivering a maximum horsepower of 254 hp and a maximum power output of 187 kW. The Lynk & Co 09 is paired with an automatic transmission, offering a maximum power of 187 kW and a maximum torque of 350 N·m. Transmission efficiency: The transmission acts as the medium for power transfer, inevitably involving some power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Lynk & Co 03+ uses an 8-speed automatic transmission, while the Lynk & Co 09 is equipped with an Aisin 8AT transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is known as the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. The Lynk & Co 03+ has a power-to-weight ratio of 158 Hp/T, achieving a 0-100 km/h acceleration time of 5.9 seconds, while the Lynk & Co 09 has a power-to-weight ratio of 205 Hp/T, achieving a 0-100 km/h acceleration time of 5.6 seconds.

9

3

Share

What are the reasons why a motorcycle won't start after being left unused for a long time?

Here are the reasons why a motorcycle won't start after being left unused for a long time: 1. It may be due to the electric starter not working, caused by a depleted battery. Try charging the battery first before attempting to start. 2. Gasoline is volatile, and if the motorcycle is left unused for too long, the gasoline in the tank may evaporate. Try adding some fuel before attempting to start. It's also possible that the remaining gasoline has deteriorated and formed sticky residues that clog the carburetor's jets, preventing fuel from being sprayed and making it impossible to start. In this case, simply remove the carburetor, clean it thoroughly, unclog all the jets, replace the gasoline, check that the spark plug is firing correctly, ensure the cylinder pressure is normal, and make sure the intake and exhaust are unobstructed—then it should start. 3. If the motorcycle hasn't been used for too long, certain components may have deteriorated due to lack of maintenance and could be damaged. In this case, take it to a repair shop for servicing. Motorcycle maintenance tips are as follows: 1. During the break-in period, the engine should reach around 1,300 to 1,500 RPM when warming up. If it's too low, the oil pressure may be insufficient, leading to wear on some components. 2. Regularly check the condition of the spark plug and replace it promptly if it's severely worn. 3. The chain should be lubricated frequently. If possible, use chain-specific oil or diesel; if not, use engine oil. Apply a moderate amount to prevent excess oil from splashing onto the tires and causing slippage. 4. While riding, ensure the gear matches the speed to avoid overloading the engine.

8

4

Share

What are the reasons why Changan cars fail to start?

There are several reasons why a vehicle may fail to start, including a dead battery, improper gear adjustment, and excessively low temperatures. Dead battery: Electricity plays a crucial role in our daily lives. If there's a power outage at home for a day, it would be a very unpleasant situation. Similarly, if a car's battery is dead, the vehicle won't be able to start. There are many reasons for a dead battery, such as forgetting to turn off the headlights when parking or the battery being too old. Therefore, when the car fails to start, you can check if there's an issue with the battery. Generally, a dead battery manifests as the starter beginning to rotate when you try to start the car, but the speed is insufficient and weak. Improper gear adjustment: Drivers of manual transmission vehicles usually don't encounter this issue. This problem occurs with automatic transmission vehicles. Since automatic transmission cars don't require operating the gear lever, it's easy to forget to put the car in P (Park) when stopping and then attempt to start the car without noticing. As a result, the car won't start. Excessively low temperatures: At low temperatures, the viscosity of gasoline engine oil also increases, meaning the oil's fluidity decreases. Engine oil helps the engine operate. If, in low temperatures, the crankshaft can't reach the speed required for starting, it won't meet the standard to start the engine. The same applies to gasoline. When temperatures are low, the engine's heat absorption affects the temperature of the air-fuel mixture, causing most of the fuel to enter the cylinder in liquid form, resulting in an overly lean mixture. Naturally, the car won't start.

15

1

Share

What materials should be brought for the first car maintenance?

The items required for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle's registration certificate; vehicle's purchase invoice. Take these to the designated first maintenance institution for the vehicle's first maintenance. Note: Make an appointment with the 4S shop in advance. The first maintenance refers to the initial maintenance after the new car is driven, and the specific time varies from car to car, usually after driving 1,000 to 3,000 kilometers. The car needs to participate in the first maintenance in time, neither in advance nor delayed. The realization of the first maintenance marks that the running-in period of the car is now over, and it can be driven according to the standard load and normal speed required by the car. The time for the first car insurance is calculated according to the date of picking up the car. There are two indicator values for the first maintenance time: mileage and time. Whichever comes first is the standard. The first maintenance items include: changing the engine oil, oil filter, cleaning the air filter, checking whether various oil levels are normal, checking whether the generator belt and wiper blades are damaged, checking whether the tire pressure is normal, checking whether the tires are damaged, bulging, etc. Necessary time: It takes about 2 hours to complete all the work. The most important thing for the first maintenance of a new car is to change the engine oil and oil filter. When changing the engine oil, the oil filter element must be replaced together. When choosing engine oil, you must refer to the "Vehicle Use and Maintenance Manual", as different models specify different engine oil grades. Maintenance precautions: Do not wash the inside of the car body with water: Many people will tidy up and clean the car by themselves during holidays, washing the body with water and scrubbing with a cloth. Here, it needs to be reminded that the inside of the car body does not need to be washed directly with water. If the floor mats are dirty, you can use a vacuum cleaner, or take them out, brush and wash them with detergent, dry them, and then put them back. There are many through holes in the grooves under the rubber mats on the floor of the cab. After water enters, it will not dry by wind, but will flow through the through holes to the gearbox and other parts for erosion and corrosion. The good practice is to clean with a vacuum cleaner and then scrub with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is in short supply, it is recommended that you drain the antifreeze as soon as possible and add the same brand of antifreeze from the beginning. Because the brands of antifreeze are different, their chemical functions are also very different. Various functional preservatives will corrode other functional preservatives. Different brands of antifreeze use different preservatives. Do not mix them to avoid unnecessary trouble. Do not lubricate the tire bolts and nuts: When the bolts of a running car are rusty, they are usually oiled so that they can work normally again. In order to prevent the bolts and nuts on the wheels from rusting, some people apply lubricating oil to the bolts and nuts, but this brings necessary risks to safe driving. When the car is running at high speed, the bolts and nuts are simply lifted or even dropped, causing driving failure. When promoting the EFI car, there is no need to step on the accelerator: The promoter of the EFI car is different from that of ordinary cars. Its fuel injection control device can actively adjust the fuel supply according to the temperature and working conditions of the promoter, making the promoter smoothly promoted.

16

0

Share

What is a Fishbone Lane Marking?

Fishbone lane marking is a new type of traffic sign designed to visually give drivers the impression that the lane is gradually narrowing. Its primary purpose is to remind drivers to slow down and also to indicate that the section of road is a high-risk accident area, requiring drivers to reduce speed in advance and pay attention to the surrounding traffic conditions. There are two types of fishbone lane markings: one with a dashed line in the middle and another with a solid line in the middle. The fishbone lane marking with a dashed line in the middle allows lane changes, similar to the dashed yellow lines on roads; whereas the fishbone lane marking with a solid line in the middle does not permit lane changes.

4

5

Share

How to Use the Three Driving Modes of BMW 3 Series?

What is the fuel tank capacity of the 2019 Toyota Levin?

What is the 0-100 km/h acceleration time of the Lynk & Co 03+?

What are the reasons why a motorcycle won't start after being left unused for a long time?

What are the reasons why Changan cars fail to start?

What materials should be brought for the first car maintenance?

What is a Fishbone Lane Marking?

Why does the Suzuki UY125 have a single rear shock absorber?

How Long Can a Car Run After Running Out of Fuel?

How to Remove Cement Spilled on a Car?

What is the fuel tank capacity of the Jinjila 300?