How to Use the Tank Turn Feature on the Land Cruiser?

Is the AMT transmission good?

AMT (Automated Manual Transmission) is a combination of AT automatic transmission and MT manual transmission. Vehicles equipped with AMT no longer require a clutch pedal; the driver only needs to simply press the accelerator pedal to easily start and drive the car. Structurally, it can be understood as a manual transmission that uses hydraulic mechanisms to operate the clutch and shift forks for automatic gear shifting. Advantages: Simple structure, easy operation, fast shifting, fuel-efficient and durable, high transmission efficiency, and relatively low cost. Since the AMT transmission is structurally evolved from the MT transmission, it also inherits the MT transmission's characteristics of strong durability and easy maintenance. Disadvantages: Mainly, it has significant gear shift impact, severe jerking, and poor comfort. Its popularity in China is far lower than in developed countries in Europe and America. Currently, AMT is basically only used in some A0-class models.

13

4

Share

How to Solve the Mismatch Between Range and Fuel Gauge?

It is recommended to visit a 4S shop and seek professional maintenance personnel for assistance, as this type of issue cannot be resolved on your own. The vehicle's range is calculated by the onboard computer based on the car's fuel consumption. In reality, fuel consumption is not consistent every second, so a mismatch between the range and fuel gauge is quite normal. The factors affecting fuel consumption are as follows: 1. Travel conditions, road environment, and driving habits all influence the car's fuel consumption. 2. Different driving habits can lead to variations in fuel consumption. For example, frequent rapid acceleration or deceleration can increase fuel consumption by approximately 5%-10% compared to normal driving. 3. Road conditions also significantly impact fuel consumption. Poor road conditions require more power from the car, leading the engine to consume more fuel. 4. Statistics show that driving the same distance in urban areas consumes about 20% more fuel than on highways or in suburban areas. Compared to stop-and-go city driving, highway and suburban driving are smoother and result in relatively lower fuel consumption.

2

Share

Which is More Advanced: ZF 8AT or Aisin 8AT?

Compared to the Aisin 8AT, the ZF 8AT is more advanced. A device for changing the speed ratio and direction of motion. Used in automobiles, tractors, ships, machine tools, and various machines to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. A gear-driven transmission generally consists of a housing and several gear pairs. Introduction: A device for changing the speed ratio and direction of motion. Used to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. A gear-driven transmission generally consists of a housing and several gear pairs. Function: During vehicle operation, to adapt to different working conditions, the driving force and speed of the vehicle need to vary within a certain range. However, the existing engine's torque and speed variation range cannot meet this requirement, hence the installation of a transmission.

8

4

Share

Can You Stop During the Reverse Parking Test in Subject Two?

During the reverse parking test in Subject Two, stopping midway is not allowed. If the vehicle stops for more than 2 seconds during the process, 5 points will be deducted each time. The reasons for stopping and techniques to avoid stopping are as follows: Reasons for stopping during reverse parking: There are three main reasons: First, insufficient clutch control leads to inconsistent speed, including sudden stops; second, uneven ground with small bumps or slight slopes can cause brief stops; third, when turning the steering wheel to full lock, the angled front wheels create significant resistance, causing the vehicle to stop momentarily. Techniques to avoid stopping midway: Master clutch control. If the speed is too fast, gently press the clutch slightly; if the speed slows down or is about to stop, lift the clutch slightly to maintain the ideal speed; the speed should not be too slow. During reverse parking, control the speed to ensure it is neither too slow nor too fast, just moderate.

15

1

Share

Why Should Turning Vehicles Yield to Straight-going Vehicles?

Because straight-going vehicles generally travel at higher speeds with heavier traffic flow, while turning vehicles move slower with relatively lighter traffic, yielding to straight-going vehicles helps reduce traffic accidents. Therefore, traffic regulations mandate that turning vehicles must yield. Below are relevant explanations: 1. On many urban roads, there are main roads and branch roads (connectors). Vehicles on branch roads must yield to those on main roads, regardless of whether the branch road vehicle is going straight or encountering an intersection - they must always yield to main road vehicles. Otherwise, in case of an accident, the branch road vehicle bears full responsibility; 2. For example, when vehicle A on the main road intends to turn right into the service road, vehicle B traveling straight on the service road must yield. If failure to yield results in a collision, vehicle B on the service road will be held responsible.

6

3

Share

What is the reason for the KAM restart failure in the Buick Excelle?

Check whether the battery is loose, and check whether the engine computer harness is loose. If there are no issues with these, it is likely a problem with the computer. The following is an introduction to the new Buick Excelle: 1. Dimensions: It is a compact car with a body size of 4609mm in length, 1798mm in width, 1486mm in height, a wheelbase of 2640mm, a fuel tank capacity of 44 liters, and a trunk capacity of 400 liters. 2. Powertrain: The new Buick Excelle is equipped with a 1.0T turbocharged engine, delivering a maximum horsepower of 125 PS, a maximum power of 92 kW, and a maximum torque of 170 Nm, paired with a 6-speed manual transmission.

8

3

Share

How to Use the Tank Turn Feature on the Land Cruiser?

Is the AMT transmission good?

How to Solve the Mismatch Between Range and Fuel Gauge?

Which is More Advanced: ZF 8AT or Aisin 8AT?

Can You Stop During the Reverse Parking Test in Subject Two?

Why Should Turning Vehicles Yield to Straight-going Vehicles?

What is the reason for the KAM restart failure in the Buick Excelle?

How Often Should Car Wipers Be Replaced?

What is the width of a highway?

When is the second car maintenance?

How Many Days Does It Take to Get License Plates at the DMV?