How to use the sunroof of Volkswagen Tiguan?

What does 1.2t in a car represent?

Car 1.2t indicates that the vehicle is equipped with a 1.2L displacement turbocharged engine. The preceding number represents the engine's displacement, while the 'T' stands for Turbo, meaning turbocharging. This can be understood as the engine utilizing forced induction technology, typically applied to small-displacement engines. Below is relevant information about turbocharged engines: 1. Core Concept: A turbocharged engine relies on a turbocharger to increase the engine's air intake. The turbocharger essentially functions as an air compressor. 2. Working Principle: It utilizes exhaust gases from the engine as power to drive the turbine in the turbine housing (located in the exhaust passage). The turbine then drives the coaxial impeller located in the intake passage, which compresses fresh air delivered through the air filter pipe before sending it into the cylinders. As engine speed increases, the exhaust gas velocity and turbine speed synchronously accelerate, enhancing air compression and consequently increasing the engine's air intake, thereby boosting the engine's output power. 3. Function: The engine delivers higher power and torque. Models equipped with turbocharging typically output approximately 40% more power than non-turbocharged models.

5

Share

What brand of tires does the Mazda3 Axela come with?

The Mazda3 Axela is equipped with Goodyear brand tires. Below are specific details about car tire replacement: 1. The duration for replacing car tires depends on various factors. For drivers with good driving habits, tires generally need to be replaced every 3-5 years or after driving 60,000-80,000 kilometers. If the vehicle is frequently driven on harsh road conditions, such as gravel roads, or experiences frequent traffic jams, sudden braking, or sharp turns, the replacement interval will be shorter. 2. The main material of tires is rubber, which naturally ages over time. This aging process typically manifests as the tires hardening and developing small cracks on the sidewalls. Natural aging usually occurs within 4-5 years. Tires that have been in use for 5 years should be replaced promptly to avoid the risk of blowouts. 3. Monitor the wear condition of the tires. If the tires are severely worn, and the tread patterns have reached the same level as the wear indicators, the tires should be replaced. Otherwise, braking on wet or slippery roads may become difficult, increasing the risk of losing control of the vehicle. Additionally, driving on excessively rough surfaces may lead to tire blowouts.

9

3

Share

What Causes Car AC to Freeze and Stop Blowing Air?

The reasons why a car's air conditioning freezes and stops blowing air include: 1. Clogged AC filter: This prevents airflow, leading to freezing. 2. Blower motor failure: A damaged blower motor stops the AC from blowing air. 3. Issues with the car's AC control system: For example, a faulty expansion valve with excessive opening can cause the evaporator temperature to drop too low, resulting in ice blockage and preventing airflow. Detailed analysis of why a car's AC freezes and stops blowing air: 1. Clogged AC filter: When the AC operates, outside air passes through the filter before entering the car, trapping many airborne particles and easily becoming clogged. You can remove the filter to check if it's too dirty—excessive dirt can block airflow. 2. Blower motor failure or damage: This will inevitably stop the AC from blowing air. Overheating of internal coils or capacitor damage can cause blower motor issues. You can test by setting the AC to maximum speed and listening for the blower motor's sound to determine if it's faulty. If a fault is detected, promptly visit a 4S shop or repair facility for inspection and repair.

12

1

Share

Is Corolla under GAC or FAW?

Corolla is a model under FAW Toyota. Here are the specific details about Corolla: 1. Corolla uses two engines, one is a 1.2-liter turbocharged engine, and the other is a 1.8-liter naturally aspirated engine. 2. The 1.2-liter turbocharged engine has 116 horsepower and a maximum torque of 185 Nm, with a maximum power speed of 5200 to 5600 rpm and a maximum torque speed of 1500 to 4000 rpm. It is equipped with VVT-iw technology and direct injection technology, and uses an aluminum alloy cylinder head and block, matched with a CVT transmission. 3. The 1.8-liter naturally aspirated engine has 98 horsepower and a maximum torque of 142 Nm, with a maximum power speed of 5200 rpm and a maximum torque speed of 3600 rpm. It is equipped with VVT-i technology and multi-point fuel injection technology, and uses an aluminum alloy cylinder head and block. The matched electric motor has a maximum power of 53 kW and a maximum torque of 163 Nm. 4. The front suspension uses a MacPherson independent suspension, and the rear suspension uses an E-type multi-link independent suspension.

6

2

Share

What does the jagged white solid line on the road represent?

The white sawtooth solid line on the road represents a variable guidance lane line. A variable guidance lane means that after entering this lane, there is more than one lane direction. For example, some intersections allow right turns and straight-through movements (i.e., right turns and straight-through movements are combined into one lane), or U-turns and left turns are combined into one lane (generally used for the left lane). Additional information: The following are relevant details about guide markings: 1. Road traffic markings: These include various lines, arrows, text, as well as three-dimensional markings, raised road markers, and roadside contour markings painted on the road surface, constituting traffic signal facilities; 2. The function of road traffic markings: To separate motor vehicles, non-motor vehicles, and pedestrians, improve road utilization, reduce or prevent traffic accidents, and be used in conjunction with traffic signs and signals to enhance their effectiveness; 3. There are over 70 types of traffic markings: According to the marking method, they can be divided into white dashed lines, white solid lines, yellow dashed lines, yellow solid lines, double white dashed lines, double white solid lines, double yellow dashed lines, and yellow alternating solid and dashed lines, etc.

4

3

Share

How to Shift Gears in a Dual-Clutch Transmission Car?

Shifting gears in a dual-clutch transmission car is done by pushing the gear lever forward to upshift and pulling it backward to downshift. The dual-clutch system is computer-controlled and does not require manual operation. The dual-clutch mechanism primarily enhances shifting speed and eliminates power transmission interruption during gear changes. A dual-clutch transmission (DCT) differs from conventional automatic transmission systems, as it combines aspects of both manual and automatic transmissions. It offers the flexibility of a manual transmission and the comfort of an automatic transmission while providing uninterrupted power output. During gear shifts, the driver must depress the clutch pedal to engage different gears, which can cause a brief interruption in power delivery.

14

0

Share

How to use the sunroof of Volkswagen Tiguan?

What does 1.2t in a car represent?

What brand of tires does the Mazda3 Axela come with?

What Causes Car AC to Freeze and Stop Blowing Air?

Is Corolla under GAC or FAW?

What does the jagged white solid line on the road represent?

How to Shift Gears in a Dual-Clutch Transmission Car?

What is the fuel consumption of the new BYD Tang fuel version?

Can a car pass the annual inspection with the engine malfunction indicator light on?

Should the handbrake be pulled when restarting after stalling in Subject 2?

What is the normal tire pressure for a new car?