How to Use the Skoda Wiper?
4 Answers
Here is how to use the Skoda wiper: 1. Start the vehicle and wait for the entire car to be powered on; 2. Locate the wiper control lever below the steering wheel; 3. Push down to the 2nd position for water spray (same as the front wiper), and press all the way down (hold) for wiper water spray. Pull up once for the front wiper to swipe twice, and hold it up for the front wiper water spray. Below are the details of the wiper status codes: 1. OFF – Wiper stops working. 2. INT – Automatic intermittent operation. Pull the lever down one notch, and the wiper will start working automatically in intermittent mode. 3. LO – Continuous operation. Pull the lever down another notch, and the wiper will work continuously at an automatic rate. This setting also requires manual reset and is suitable for heavy rain or snow. 4. HI – Continuous high-speed operation. Pull the lever all the way down, and the wiper will work at high speed. This setting requires manual reset and is suitable for heavy rain. Generally, in heavy rain, even setting the wiper to the highest speed may not be effective. The best approach is to turn on the hazard lights, pull over, and wait for the rain to ease before continuing.
I've been driving a Skoda for several years and find the wiper operation quite straightforward, mainly controlled by the stalk on the right side of the steering wheel. Pushing it down once gives a single wipe, perfect for drizzles; pushing it up to the first position sets slow continuous wipes, while the second position is for fast wipes - use this when it's pouring. There's a button on the stalk - press and hold it to spray washer fluid for cleaning, and the wipers will automatically swipe a few times afterward. I recommend regularly checking the wiper blades for wear and replacing them promptly if they don't clear the windshield properly, as poor visibility in rain compromises safety. Also, keep the washer fluid reservoir filled, using antifreeze type in winter to prevent freezing. Overall, the design is quite user-friendly - you'll get the hang of it immediately, no need to worry about complexity.
As a driver with over 20 years of experience, I must emphasize the critical role of windshield wipers in rainy conditions. In ŠKODA vehicles, the wiper operation is controlled by the stalk on the right side of the steering wheel. Gently pushing it upward activates the slow-speed mode, which is sufficient for light rain. Pushing it again switches to high speed for heavy downpours. Pressing the button on the end of the stalk sprays washer fluid, followed by several automatic wipes. For safety, I always check wiper functionality before starting the car to prevent sudden failures. Pay attention to wiper blade maintenance – squeaking sounds or streaking indicate aging blades that need replacement. In daily use, keeping the windshield clean significantly improves visibility.
I often do car maintenance myself, and wiper system upkeep is part of my routine. On Škoda vehicles, the right-hand stalk controls the wipers: rotating the top knob adjusts intermittent wipe speed, a light push executes a single wipe, while pushing upwards activates slow continuous wiping. Pressing the end button sprays washer fluid, followed by several wipes. For maintenance, wiper blades typically need replacement every six months depending on cleaning effectiveness; standard supermarket washer fluid works fine. The operation is straightforward without frills, but regular checks prevent minor issues from becoming troublesome.
