How to Use the S Gear Plus and Minus Signs?

1 Answers
DelKimberly
07/30/25 8:41am
The usage method of the S gear plus and minus signs is: 1. Switch to manual mode: Shift the gear to D position, then push the gear lever to the right. At this time, the transmission will first enter the sport mode; 2. Switch to automatic mode: Simply push the lever left to the D position to complete the switch. At this time, the gear will be controlled by the computer. The S gear is the sport mode, used for climbing hills and quick overtaking. In S gear mode, the transmission can shift freely, the shifting time will be delayed, and the engine will maintain high RPM for a longer period, allowing the car to move at low gear and high RPM for an extended time, thereby obtaining greater torque output and acceleration.
Was this review help?
13
1
Share
More Forum Discussions

What type of engine oil is suitable for the Hyundai Elantra?

For the Hyundai Elantra, 5W30 engine oil is the most suitable choice. The functions of engine oil include lubricating and reducing friction, assisting in cooling, sealing to prevent leaks, preventing rust and corrosion, and cushioning against shocks. The Hyundai Elantra is a compact 4-door, 5-seater sedan with the following dimensions: length 4570 mm, width 1775 mm, height 1445 mm, and a wheelbase of 2700 mm. It has a fuel tank capacity of 50 liters. The Hyundai Elantra is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 93.8 kW and a maximum torque of 156 Nm. It is paired with a 6-speed manual transmission and features front-wheel drive. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
1
3
Share

How to Open the Rear Car Door?

Methods to open the rear car door: Use the car key to unlock the vehicle; hold the door handle and pull to open the door. Reasons and solutions for the rear car door not opening are as follows: 1. The central locking system is activated; use the car key to unlock and then lock the vehicle twice, locate the central lock button on the left front door trim in the main driver's compartment, and press the unlock button. 2. The child lock is activated; turn the child lock to the off position. 3. The door lock cable is malfunctioning; replace the door lock cable. 4. The door hinge and lock post are deformed; realign the door hinge and lock post. 5. The door limiter is malfunctioning; replace the door limiter. 6. The door is frozen; thaw the door using sunlight before attempting to open it.
20
3
Share

What documents are needed for driver's license renewal?

Driver's license renewal requires the following materials: 1. The identity certificate of the motor vehicle driver. 2. The "Motor Vehicle Driver's License". 3. A medical certificate of physical condition issued by a medical institution at or above the county level or the regimental level of the armed forces. 4. For applications involving special small automatic transmission passenger vehicles for the disabled, an additional medical certificate of physical condition issued by a specialized medical institution designated by the provincial health authority is required. The following are the contents of the motor vehicle driver's license review: 1. Road traffic violations and accident handling status; 2. Physical condition status; 3. Road traffic violation points and participation in study and examination after accumulating 12 points.
12
1
Share

Where is the car horn button located?

Car horn buttons are located on the left and right edges of the steering wheel, marked with small horn symbols. The horn serves as the vehicle's audio signaling device, allowing drivers to emit necessary sound signals as required by regulations during driving to warn pedestrians and alert other vehicles, ensuring traffic safety. It is also used for urging movement and transmitting signals. Reasons for a non-functioning car horn include: 1. Horn contact erosion creating impedance, which weakens the current through the electromagnetic coil, reducing electromagnetic attraction and preventing it from attracting the armature to drive the diaphragm for normal vibration; 2. Improper sealing allowing water vapor to enter, causing damp contacts that fail to operate properly; 3. Incomplete removal of insulation paint on the enameled wire ends or loose rivet crimping resulting in poor contact.
2
4
Share

How to Turn on the Headlights of a Toyota Corolla?

Toyota Corolla's headlights can be turned on by: 1. Locating the lighting control assembly on the left side of the steering wheel and rotating it to turn on the low beams; 2. Pressing the lighting switch button below the left side of the steering wheel and pushing it in the opposite direction of the driver to turn on the high beams. The Corolla is a compact 4-door, 5-seater sedan with body dimensions of 4635mm in length, 1780mm in width, and 1455mm in height, a wheelbase of 2700mm, and a fuel tank capacity of 50 liters. It is equipped with a 1.2T turbocharged engine, delivering a maximum power of 85kW and a maximum torque of 185Nm. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs an E-type multi-link independent suspension.
3
5
Share

How to Determine the Rear of the Car When Parallel Parking?

Stop when the front of the car is completely inside the parking space, and the rear will not extend beyond it. Here are the detailed steps: 1. When starting to reverse, turn the steering wheel one and a half turns to the right. Observe the top of the wheel in the right rearview mirror; it should be about 40 centimeters away from the right line of the parking space to ensure the right side does not cross the line during parking. 2. Watch the left rearview mirror, and when the left line of the parking space becomes visible, immediately turn the steering wheel half a turn back to the left and continue reversing. 3. Observe both rearview mirrors. When the solid lines of the parking space appear on both sides and the distances are roughly equal, immediately turn the steering wheel one full turn back to the left and continue reversing. 4. Watch the left rearview mirror until it completely covers the front line of the parking space, then brake.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.