···
Log in / Register

How to Use the S Gear in Volkswagen Lavida?

3 Answers
RachelFitz
07/29/25 9:34pm
The method to use the S gear in Volkswagen Lavida is: 1. Engage the S gear when driving on uphill or downhill sections; 2. Shift to S gear when accelerating to overtake. The Volkswagen Lavida is a compact car with a 4-door, 5-seat sedan body structure. Its dimensions are: length 4670mm, width 1806mm, height 1474mm, with a wheelbase of 2688mm and a fuel tank capacity of 51 liters. The Volkswagen Lavida is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum power speed of 5000rpm, paired with a 7-speed dual-clutch transmission.
Was this review help?
17
5
Share
DelLandon
08/15/25 8:38pm
I've been driving a Volkswagen Lavida for several years, and the S mode is quite easy to use on the automatic transmission: when the car is in D mode, simply push the gear lever to the right to enter S mode. At this point, the engine RPM increases, providing quicker acceleration, which is especially suitable for overtaking or climbing steep slopes. I often use it on highways because the instant response is very helpful, but don't use it for too long, otherwise fuel consumption will increase significantly, and the engine noise will also be louder. An additional reminder: using the paddle shifters on the steering wheel can give you better control. For regular city driving, switch back to D mode for better fuel efficiency. Regularly check the transmission fluid to avoid mechanical wear. Safety first—avoid using S mode arbitrarily on slippery roads.
Was this review help?
16
2
Share
Expand All
LeColeman
10/17/25 4:33am
My Lavida drives quite spiritedly, and the S mode is super handy! While driving, just push the gear lever from D to S—simple and straightforward. Once engaged, the throttle becomes much more responsive, with revs soaring above 3000 rpm, delivering a strong sense of acceleration. I love using it on open roads or during weekend getaways, like overtaking on mountain roads—it’s exhilarating. But remember, don’t get carried away and keep it on all the time; in city traffic, it can guzzle fuel and potentially strain the engine. Learn some techniques, like gently pressing the throttle for smoother starts. During routine maintenance, don’t overlook the transmission’s condition.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

How much fuel can actually be added to a 55-liter fuel tank?

A 55-liter fuel tank can actually hold up to 70 liters of fuel. There are two key points to note when adding engine oil: When selecting engine oil: It is essential to strictly follow the oil grade specified in the vehicle's user manual. If the same grade is not available, a higher-grade oil can be used, but a lower-grade oil should never be substituted. When adding engine oil: The amount of oil added should be slightly below the standard mark. Excessive oil increases the crankshaft's rotational resistance, reduces the engine's output power, and can cause the oil to enter the combustion chamber, leading to oil burning, blue smoke emission, and increased fuel consumption.
18
2
Share

How to clean Audi headlights?

According to the car's design, you must first turn on the high beam of the headlights. After entering the driver's seat, first turn on the headlights, then push the lever on the left side of the steering wheel forward to activate the high beams. While the high beams are on, operate the windshield wiper control lever by pulling it toward your body (the same action used to clean the windshield). After pulling the lever, the headlight cleaning function will immediately activate automatically, and at this time, both the headlight cleaning function and the windshield cleaning will be activated simultaneously.
8
4
Share

Will the Car Stall When Starting in Third Gear?

Starting in third gear can cause the car to stall because higher gears require higher output speeds and result in lower torque. At this point, the engine cannot keep up with the required speed, leading to stalling. Generally, cars should start in first or second gear. The correct method for starting a car: After confirming the surrounding traffic safety, turn on the left turn signal and set the gear lever to first gear (for automatic transmissions, set to drive mode). While ensuring rear safety, release the handbrake, grasp the right moment to start, release the clutch while accelerating, and merge into the lane as soon as possible according to traffic conditions for normal driving. Method for starting on a slope: Pull the handbrake tight, press the brake pedal, and shift into first gear. Release the brake pedal, quickly accelerate while lifting the clutch. When the clutch is in a semi-engaged state, release the handbrake and accelerate, then fully release the clutch pedal. Precautions for starting on a slope: If the car rolls backward when starting on a slope, immediately press the clutch and brake, pull the handbrake tight, and restart the procedure. If the engine stalls due to not pressing the clutch in time or insufficient acceleration, restart the vehicle. If the slope is not steep and there are no vehicles behind, you can start without using the handbrake if slight rolling back is not dangerous, but the starting action must be quicker.
8
1
Share

Correct Method for Starting an Audi Q3 Automatic Transmission Vehicle

Start the engine and check if all the gauges are functioning properly. Depress the clutch pedal and shift the gear lever into a low gear. (For automatic transmission: Depress the brake pedal and shift the gear lever into the D position. Turn on the left turn signal, honk the horn, and simultaneously observe the front, left, right, and upper areas of the vehicle as well as the rearview mirrors. Release the parking brake lever when there are no obstacles. Hold the steering wheel, release the clutch pedal with your left foot according to the proper technique, and slowly press the accelerator pedal to ensure a smooth start. Once the vehicle has entered the normal driving lane after starting, you can turn off the left turn signal.
6
1
Share

What does the exclamation mark inside the brackets on the dashboard mean?

Red exclamation mark (specifically in the form of an exclamation mark inside a circled bracket) indicates a warning for the braking system, mainly due to braking system failure or low brake fluid level. Solution: Immediate inspection and repair of the braking system is required to avoid accidents. Apart from the red exclamation mark representing braking system failure, all other exclamation marks on the car are yellow, indicating general faults, automatic transmission faults, abnormal tire pressure, and lighting faults. Below is a detailed analysis of these four situations: General Fault: An exclamation mark inside a triangle indicates a fault in the car's general performance or components and functions. This could include parking sensor failure, fuel cut-off system intervention or failure, external light failure, engine oil pressure sensor failure, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: An exclamation mark inside a yellow gear is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant below the normal range. Transmission oil should be replaced promptly. Abnormal Tire Pressure: An exclamation mark with a horizontal line below the bracket represents the tire pressure monitoring warning light. This light turns on when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb exclamation mark is the lighting fault indicator, indicating a fault in the car's lights. Solution: Visit a 4S shop as soon as possible for inspection and repair, or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting, to identify the issue.
9
5
Share

Is the Fuel Tank Capacity the Same as the Actual Fuel Filling Amount?

Fuel tank capacity is not the same as the actual fuel filling amount. This is intentionally set by car manufacturers to ensure the safety of normal vehicle operation. Below is relevant information about fuel tank capacity: Definition: Fuel tank capacity refers to the size of the fuel tank, measuring a vehicle's ability to hold fuel. The size of the fuel tank is directly related to the vehicle's fuel consumption. Generally, a full tank can drive over 500 kilometers. For example, a car with a fuel consumption of 10 liters per 100 kilometers usually has a fuel tank capacity of around 60 liters. Purpose: Fuel tank capacity determines the driving range. For two cars with identical engines, the one with a larger fuel tank can travel farther. To know how much fuel your vehicle's tank can hold, you can refer to two aspects: first, the fuel tank capacity specified in the vehicle's user manual, and second, actual refueling experience. The fuel tank capacity listed in the manual is smaller than the actual fuel filling amount.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.