How to use the S gear in Volkswagen Lavida?

1 Answers
CamilaRose
07/30/25 5:23am
How to use the S gear in Volkswagen Lavida: When going uphill or overtaking quickly, shift into S gear to enable free gear shifting of the transmission, allowing the engine to maintain higher RPM for a longer period. By adjusting the engine speed and fuel injection volume, the engine can unleash more powerful performance. Compared to the D position on the gear selector, all forward gears will automatically delay upshifting and advance downshifting to fully utilize the engine's reserve power. The Volkswagen Lavida is an A-class sedan produced by SAIC Volkswagen. Taking the Lavida 2021 280TSI DSG Comfort Edition as an example, its body dimensions are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. In terms of power, the Lavida 2021 280TSI DSG Comfort Edition is equipped with a 1.4T inline 4-cylinder turbocharged engine, delivering a maximum power of 110kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
15
2
Share
More Forum Discussions

What is the fault when the BMW 5 Series has hard brakes and no power assistance?

The cause of the fault is air leakage or failure of the vacuum booster pump. The following is an introduction to the brake booster pump: 1. Principle: During the braking process, the vacuum entering the booster pump is controlled to move the diaphragm, and through the linkage device, the push rod on the diaphragm is used to assist human force in stepping on and pushing the brake pedal, thereby amplifying the force exerted by the driver on the pedal. 2. Function: Utilizing the principle of air intake during engine operation, a vacuum is created on one side of the booster pump, forming a pressure difference relative to the normal air pressure on the other side. This pressure difference is used to enhance the braking thrust.
3
3
Share

Why does the Jetta EPC light come on with loss of power when accelerating?

There are mainly three reasons for the Jetta's EPC light coming on with loss of power during acceleration. They are: First reason: Throttle body is too dirty. Second reason: There is a leak in the intake system. Third reason: There is a leak in the crankcase ventilation system. The main solutions for the EPC light coming on are the following four: 1. Troubleshoot intake system faults, use fuel that meets standards, and clean the throttle body. 2. Remove carbon deposits from related parts. 3. Rewrite the relevant ECU data. 4. The possibility of other faults cannot be ruled out; specific diagnosis should be based on reading fault codes.
14
4
Share

What are Geely's pure electric vehicles?

Geely's pure electric vehicles include: Geely Emgrand EV, Geely Emgrand GSE. Taking the Geely Emgrand GSE 2020 500 Yue Shang model as an example, it belongs to the compact SUV category. The body dimensions are: length 4440 mm, width 1833 mm, height 1560 mm, with a wheelbase of 2700 mm. The luggage compartment volume ranges from 330 to 1042 liters, and the curb weight is 1635 kg. The Geely Emgrand GSE 2020 500 Yue Shang model is equipped with a permanent magnet synchronous motor, with a total motor power of 120 kW and a total motor torque of 250 Nm. It is paired with a single-speed fixed gear ratio transmission.
17
1
Share

What does it mean when the safety technical inspection exceeds the validity period?

It means the vehicle's annual inspection has expired, and the relevant annual inspection procedures should be completed as soon as possible. Relevant information about vehicle annual inspection is as follows: 1. Introduction: Vehicle annual inspection (Vehicles-inspection), also known as motor vehicle inspection. Depending on the usage nature of the motor vehicle, its inspection items and scope also differ. 2. Inspection items: According to the definition in RB/T218-2017 "Requirements for Qualification and Competence Assessment of Inspection Bodies - Motor Vehicle Inspection Institutions," motor vehicle inspection includes three categories: motor vehicle safety technical inspection, motor vehicle emission inspection, and comprehensive performance inspection of vehicles.
13
2
Share

Where is the car engine air intake located?

Car engine air intakes are typically located at the front or rear of the engine. The air intake is an opening in the air duct or similar structure that collects air through the vehicle's forward motion and directs it into the engine or ventilation system. An engine is a machine capable of converting other forms of energy into mechanical energy. The engine intake system consists of three main components: the air filter, intake manifold, and air flow meter. Its functions are: 1. To filter out impurities or dust from the air and provide clean, fresh air to the cylinders; 2. To provide an appropriately concentrated air-fuel mixture; 3. To distribute the air-fuel mixture or clean air as evenly and thoroughly as possible to each cylinder.
16
3
Share

Which cars have logos consisting of a row of letters?

Cars with logos consisting of a row of letters include: Lexus, Cadillac, Lamborghini, Maserati, Land Rover Evoque, etc. Taking the Lexus ES250 as an example, it is a mid-to-large-sized 4-door 5-seater sedan with body dimensions of: length 4915mm, width 1820mm, height 1450mm, and a wheelbase of 2820mm. The Lexus ES250 is equipped with a 2.5L naturally aspirated engine and a 6-speed automatic transmission, delivering a maximum power of 135 kW and a maximum torque of 235 Nm. Its front suspension uses a MacPherson strut independent suspension, while the rear suspension features an independent double-wishbone MacPherson strut with a stabilizer bar.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.