How to Use the S Gear in the 14th Generation Sylphy?

2 Answers
DelEvelyn
07/29/25 1:52am
S gear is typically used when high torque is needed, such as during uphill climbs or quick overtaking, to fully utilize the engine's power reserve, providing higher torque output and acceleration. It shows noticeable effects only when used in high-speed gears, and to disengage it, simply press the switch again. Here are some additional details: 1、Disadvantages of S Gear: However, since the S gear only delays gear shifts without altering other operational aspects, it inevitably increases the transmission's load in the short term, accompanied by a rise in temperature, leading to accelerated wear. Therefore, it is advisable to avoid prolonged use of the S gear. In terms of fuel consumption, because the fuel injection volume increases at high RPMs, the S gear mode consumes significantly more fuel than the normal mode. 2、Advantages of S Gear: Using the S gear also has benefits for the vehicle. Cars that frequently operate in congested urban areas tend to accumulate more carbon deposits in the engine. Therefore, using the S gear appropriately at regular intervals helps remove carbon deposits from the engine, improving fuel economy and extending the engine's lifespan.
Was this review help?
17
4
Share
HarleyMarie
08/12/25 5:54am
I often drive this car in S mode, which stands for Sport mode. You can simply shift the gear lever from D to S while driving without stopping. The dashboard will display an S or sport icon, and the RPM will immediately increase, making the acceleration response much quicker. It's particularly powerful for overtaking or climbing hills. The 14th-generation Sylphy is designed simply, allowing the lever to be pushed into place effortlessly. Some cars come with a manual mode where you can use the +/- buttons to shift gears manually. Remember to use it on highways or open roads, avoiding congested urban areas, otherwise, the engine noise will be loud and fuel consumption will increase. I think it's suitable for occasional spirited driving but not for long-term use; sticking to D mode is more worry-free for daily driving. The key steps are just these few, and after shifting, you'll feel a significant boost in power. I've driven it on mountain roads a few times, and it's quite exhilarating.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

How to Reset the Accord Tire Pressure Light?

Here are the specific steps to reset the Honda Accord tire pressure indicator light: 1. Start the car and press the menu button on the left side of the steering wheel. 2. Navigate to the vehicle settings option and select it. 3. Find the tire pressure calibration option and select "Calibrate" to reset the tire pressure indicator light. Additional information about tire pressure indicator lights: 1. The indicator light serves as a warning system for tire pressure issues or other related problems. 2. Tire pressure monitoring systems can be categorized into indirect and direct monitoring systems. 3. Working principle of indirect TPMS: When a tire's pressure decreases, the vehicle's weight causes that wheel's rolling radius to become smaller, making it rotate faster than other wheels. The system monitors tire pressure by comparing rotational speed differences between tires. 4. Direct TPMS: Uses pressure sensors installed in each tire to directly measure air pressure. Wireless transmitters send pressure data from inside the tires to a central receiver module, which displays each tire's pressure. The system automatically alerts the driver when pressure is too low or when there's a leak.
6
5
Share

What are the speed ranges for 1st, 2nd, 3rd, and 4th gears in a manual transmission?

1st gear is for starting, with a speed range of 0-5 km/h; 2nd gear corresponds to 5-20 km/h; 3rd gear corresponds to 20-40 km/h; 4th gear corresponds to 40-60 km/h; and 5th gear corresponds to 60-100 km/h. Generally, the ideal time to shift gears is when the engine speed reaches 2000 rpm, preferably not exceeding 2500 rpm. Below is additional information on gear shifting: Upshift timing: When the engine has ample power, it emits a dull humming sound. If, after upshifting, there is no power deficiency or shaking of the transmission mechanism, and the vehicle accelerates quickly and runs smoothly, it indicates accurate upshift timing. Downshift timing: When the vehicle's speed and engine rpm continue to drop, and you feel the car losing power with the engine compartment starting to shake, it's time to downshift one gear. Downshifting too early will cause noticeable jerking, wasting engine power, increasing fuel consumption, and negatively impacting the lifespan of the engine and transmission. Downshifting too late will result in insufficient power even after downshifting, and continued downshifting will still feel jerky. Misjudging the shift timing can lead to such irreversible consequences, inevitably affecting the driving experience.
12
5
Share

What Causes Sludge in Car Engines?

Here are the reasons for sludge formation in engines: 1. When the car frequently operates at low speeds. At this time, the crankcase temperature is low, and combined with the higher fuel injection volume during low-speed operation, some incompletely burned gasoline enters the crankcase, resulting in low-temperature sludge. 2. When the crankcase ventilation valve is partially or completely blocked by oil impurities or sludge, waste and water vapor inside the crankcase cannot be discharged in time, leading to sludge formation. 3. To improve fuel economy, some high-performance direct-injection engines on the market use a technology called lean combustion, which reduces fuel injection. Coupled with China's poor fuel quality and lean combustion, the exhaust gases entering the crankcase have high nitrogen oxide content, causing sludge. 4. The low quality of engine oil and gasoline is also a cause of sludge formation. Additional information: 1. Sludge is formed when impurities generated in the crankcase during engine operation combine with the thickening of the engine oil itself under high temperatures, resulting in deposits adhering to the engine camshaft, crankcase, oil passages, oil pan, and other locations. Both sludge and carbon deposits are harmful substances that are very detrimental to the engine. 2. If sludge appears inside the engine and is not too severe, engine cleaning oil or internal engine cleaner can be used for cleaning, which can yield good results. If the internal sludge is too severe, a complete engine disassembly is required for thorough cleaning.
3
5
Share

What is the tire model specification for the Verano?

The tire model for the Verano is 205/55R16, with the following details: 1. The Verano is equipped with Goodyear EFFICIENTGRIP Performance series tires. 2. A notable feature of these tires is their excellent noise reduction, achieved through new noise-canceling technology, which provides a quiet ride during test drives. 3. The Verano tires are mounted on 16-inch alloy wheels with a sporty design. Here is some additional information about the Verano: 1. The Verano is a mid-size sports sedan under SAIC-GM Buick, with body dimensions of 4723mm in length, 1802mm in width, and 1466mm in height. 2. In terms of power, the Verano is powered by a 1.0T and a 1.3T turbocharged engine, with maximum power outputs of 125 horsepower and 165 horsepower, respectively. The 1.0T engine is paired with a 6-speed automatic transmission, while the 1.3T engine is matched with a continuously variable transmission (CVT). 3. For the exterior, the Verano is designed based on Buick's family styling language, featuring a winged chrome grille, LED automatic sensing headlights, LED taillights, 17-inch ten-spoke two-tone alloy sport wheels, and a fastback roof.
13
2
Share

What car brand has the double R logo?

The double R logo represents Rolls-Royce Motor Cars. Rolls-Royce is a luxury automobile manufacturer founded in 1906, headquartered in the UK, with founders Henry Royce and Charles Rolls. Below is relevant information: Brand portfolio: Rolls-Royce models include the Phantom, Phantom Extended Wheelbase, Phantom Olympic Edition, Drophead Coupe, and Gold Badge Special Edition. Body dimensions: Taking the Phantom as an example, it measures 5609mm in length, 1592mm in width, and 1687mm in height, with a wheelbase of 3320mm, trunk capacity of 395L, front track of 1687mm, using gasoline fuel with direct injection system.
19
1
Share

What does the first inspection mean?

Car first inspection means the first maintenance, which is the first maintenance of the car. The maintenance items for car maintenance include: routine maintenance items are the replacement of engine oil and oil filter, air filter, gasoline filter and pollen filter, the maintenance and replacement of spark plugs, transmission oil and other related system inspection items and maintenance; mainly replacing the engine oil and oil filter to maintain the lubrication system. The main function of the lubrication system is to effectively lubricate the various components of the car engine to prevent excessive wear; the function of the oil filter is to remove impurities in the engine oil to ensure the normal operation of the lubrication system. The oil filter should be replaced together with the engine oil. Generally, the car should be maintained every 5000 kilometers.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.