How to Use the Roewe i5 Car Connectivity System?

Where is the fuel pump module located on a BMW 525?

The fuel pump control module of a BMW vehicle is located above the fuel tank, next to the fuel pump. If the fuel pump control module fails, the vehicle may experience increased fuel consumption and black smoke from the exhaust pipe. A damaged fuel pump module should be replaced promptly to avoid symptoms such as the vehicle failing to start. Below are the specific reasons for fuel pump damage: 1. Poor fuel quality: When fuel quality is poor, the fuel tank may contain various impurities or foreign objects. Although the fuel pump has a filter screen to filter gasoline, it can only block large particles, while small particles are sucked into the fuel pump motor, causing damage over time. 2. Delayed refueling: Waiting until the fuel light comes on to refuel can cause the fuel pump to operate at a low fuel level, lacking sufficient cooling and lubrication, leading to overheating and stalling of the electric pump motor. 3. Long-term neglect of fuel filter replacement: Severe clogging of the fuel filter in the fuel supply system can make it difficult for the fuel pump to pump fuel, causing it to operate under high load for extended periods and resulting in damage.

8

5

Share

Is Harder Suspension Always Better?

Suspension is not necessarily better when it's harder. A good shock absorber should enhance the wheel's ground contact performance, thereby improving the tire's grip. With better grip, both the vehicle's handling and comfort may also improve. The shock absorber is a crucial component in a car, directly affecting its handling and comfort. A shock absorber consists of two parts: the damper cylinder and the spring. The damper cylinder functions to limit the number of spring bounces. How a shock absorber works: The interior of the shock absorber is filled with oil, and the piston head has one or more drilled holes. When the shock absorber moves up and down, the oil inside the cavity flows back and forth between the upper and lower chambers through these small holes. Due to the oil's viscosity, this process also releases a significant amount of heat, effectively converting the kinetic energy generated by bumps into thermal energy.

1

4

Share

Which Cars Meet the China 6 Emission Standard?

Cars that meet the China 6 emission standard include the Tiguan L, X-Trail, Roewe RX5, Cadillac XT4, Highlander, etc. There are also many sedans that comply with the China 6 emission standard, such as the Camry, New Lavida, Sylphy, Axela, and the new generation Eado (note that not all configurations of some models meet the standard). China 6 standard vehicles refer to cars that meet the national sixth-stage motor vehicle pollutant emission standards. Taking the 2018 Tiguan L as an example, its exterior dimensions are 4712mm in length, 1839mm in width, and 1673mm in height, with a wheelbase of 2791mm. It features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum power of 186 horsepower and a peak torque of 320 Nm, paired with a 7-speed dual-clutch transmission, and has a fuel tank capacity of 62L.

9

3

Share

What does Land Rover HSE mean?

Land Rover HSE includes Range Rover HSE and Vogue, which are two versions of the Range Rover. The Range Rover is a mid-to-large SUV under the Land Rover brand. In Range Rover HSE, HSE stands for high specification, meaning that every HSE model in Land Rover's China-specific version is the highest configuration of that particular model. More details about Land Rover are as follows: 1. Land Rover Range Rover: The Land Rover Range Rover combines luxury, technology, off-road capability, and comfort, perfectly embodying the essence of an off-road king. It offers multiple versions of the Range Rover to fully meet the personalized needs of car owners. 2. Range Rover HSE is the diesel version: Basic configurations include: Terrain Response 2, rearview camera, power tailgate with foot sensor, power closing doors, panoramic sunroof, 10-way power front seat adjustment with heating, driver seat memory, Meridian sound system, 19-inch wheels, etc. 3. Range Rover Vogue: The configuration is even higher: panoramic opening sunroof, power closing doors, front and rear seat heating, steering wheel heating, front and rear surround-view camera, front seat ventilation, 20-inch wheels, power tailgate with foot sensor, three-zone independent air conditioning, in-car navigation, rearview camera, LED headlights with high beam assist, Terrain Response 1, second-row power seats, 14-way power front seat adjustment, etc.

1

0

Share

What are the methods for self-repairing when the airbag light is on?

Methods for self-repairing when the airbag light is on: 1. Check the connectors: If a connector in the airbag system is disconnected or has poor contact, especially after installing additional electrical devices or disassembling the steering wheel, pay special attention to the connection status of the connectors. 2. Loose ground wire in some part of the car: Check the contact condition of each ground wire. Since poor contact is often not visible to the naked eye, it is advisable to tighten all ground connections. Situations when the airbag warning light is on: 1. Instrument self-check: When entering the car and starting the engine, the instrument panel performs an automatic check. The airbag light will automatically turn off after the self-check, which takes about 5 seconds. This is normal. If the airbag light remains on for a long time after the self-check, it can be concluded that there is a real fault. 2. False fault: A low battery can also cause the airbag light to come on, and the airbag may feedback a signal indicating low pressure in a certain airbag, generating a fault code. In this case, simply clear the fault code. 3. Real fault: If the above two reasons are ruled out, it may be a wiring fault, and immediate repair is recommended.

1

0

Share

What are the reasons why Mercedes-Benz Carlife cannot be enabled?

The reasons why Mercedes-Benz Carlife cannot be enabled are: The data cable and USB interface models do not match, resulting in the inability to connect to Baidu Carlife. You can replace the data cable; The Baidu Carlife in the car's system is incompatible with the mobile phone's system. You can update Carlife; Carlife has not been upgraded or updated. You only need to update the version to reconnect. Because the original data cable has a data transmission function, the data cables purchased later generally do not have this function, which will affect data transmission and cause the inability to connect to Baidu Carlife. You can purchase the original data cable from the official store for connection. In addition, insufficient power supply voltage of the USB connection will also cause the inability to connect, and a USB power supply socket needs to be reinstalled. Some mobile phones cannot connect to Baidu Carlife after updating, or they keep disconnecting after connecting. This is because the Baidu Carlife in the car's system is incompatible with the mobile phone's system. You can restore the mobile phone system or try to update the car's Baidu Carlife. The reason why some models cannot connect is that Baidu Carlife has not been upgraded or updated. You need to download the latest version of Baidu Carlife online for installation, or go to a 4S shop and other places to let professionals help install the latest version.

6

2

Share

How to Use the Roewe i5 Car Connectivity System?

Where is the fuel pump module located on a BMW 525?

Is Harder Suspension Always Better?

Which Cars Meet the China 6 Emission Standard?

What does Land Rover HSE mean?

What are the methods for self-repairing when the airbag light is on?

What are the reasons why Mercedes-Benz Carlife cannot be enabled?

Is Modifying Car Lights Considered Illegal Modification?

What does the EPC yellow light mean?

What is the general weight of a motorcycle?

How to Check Which Year Beijing's New Energy Vehicle Lottery Queue Has Reached?