How to Use the Remote Start Function with the Bin Yue Remote Key?

What is the appropriate tire pressure for the Malibu?

The normal tire pressure range for the Malibu is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard requirements. The Malibu's tire pressure monitoring system is indirect, utilizing the vehicle's ABS balance control, and only displays low pressure when there is a leak. To check the tire pressure, first prepare a tire pressure gauge, locate the original tire pressure label, press the gauge onto the tire valve to measure and read the value, and remember to replace the valve cap after checking. Generally, a tire pressure above 2.8 bar is considered too high, while a pressure below 2.0 bar is too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting other components' longevity; overextends tire cords, reducing elasticity and increasing load during driving. Hazards of underinflated tires: Increases friction with the road surface, raising fuel consumption; makes steering heavy and prone to deviation, compromising safety; increases movement in tire sections, leading to abnormal overheating; weakens cord and rubber function, causing delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction with the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing strength. High-speed driving may lead to a blowout. If the tire pressure monitoring indicator lights up (a yellow symbol with an irregular circle, no stamp on top, four small spikes below, and an exclamation mark inside), it is generally due to one of three reasons: Abnormal tire pressure: Usually alerts when pressure is below 1.8 bar or above 3.0 bar. Requires tire inspection and pressure adjustment. Tire pressure monitor not reset: After inflating the tires, failing to reset the tire pressure monitor causes the system to retain old data, lighting the indicator. Simply reset the tire pressure. Damaged tire pressure sensor: The sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If damaged during driving, it triggers the warning light. A damaged sensor must be replaced.

20

4

Share

How many reverse lights does the Volkswagen Polo have?

The Volkswagen Polo has only one reverse light. The reasons for having only one reverse light are as follows: 1. When reversing: The driver's side visibility is almost unaffected, as the brake lights and wide-angle lights provide sufficient visibility. 2. Visibility: However, the visibility on the passenger side is poor, requiring the white light from the reverse light to help improve it. 3. Attention: A single reverse light makes it easier to attract the driver's attention and prevents confusion with the brake lights. In many developed countries, having only one reverse light is legally mandated. 4. Left-hand drive: The fog light on the left allows the driver behind to better observe the vehicle in front; the reverse light on the right makes it easier for the driver to reverse and park on the right side of the road at night.

19

3

Share

What is the difference between Volvo S90 B5 and T5?

The differences between Volvo S90 T5 and Volvo S90 B5 are as follows: 1. Different engines: Volvo S90 T5 is equipped with a 2.0L turbocharged engine; Volvo S90 B5 is equipped with a 2.0L turbocharged engine plus an electric motor. 2. Different power types: Volvo S90 T5 has a gasoline engine; Volvo S90 B5 has a mild hybrid system. 3. Different body lengths: Volvo S90 T5 has a body length of 5083mm; Volvo S90 B5 has a body length of 5090mm. 4. Different maximum horsepower: Volvo S90 T5 has a maximum horsepower of 254ps; Volvo S90 B5 has a maximum horsepower of 250ps.

12

3

Share

What causes the increased engine noise in Ford Escort?

Ford Escort's increased engine noise may result from the following reasons: 1. Aging engine mounts: Loose engine mounts refer to the rubber blocks placed between the engine and the vehicle frame. Their purpose is to reduce vibrations and provide cushioning during engine operation, as well as to secure the engine in place. Once these mounts age or become loose, the engine will vibrate, and the faster the speed, the louder the vibration noise. Solution: Tighten or replace the engine mounts. 2. Improper use of engine oil: If the oil viscosity does not match the engine's requirements, it can easily lead to carbon buildup, causing increased engine noise. On the other hand, if the oil viscosity is too low, it will result in insufficient lubrication, wearing down engine components and creating unusual noises. If the oil viscosity is too high, it will increase the engine's workload, also leading to noise. Solution: Use the oil grade specified in the vehicle's manual and avoid mixing different brands of oil.

9

3

Share

Why Won't the Rear Seat Buckle Fasten on a Volkswagen?

Volkswagen rear seat buckles may fail to fasten due to issues with the buckle mechanism. Main components of seat belts and their functions: 1. Webbing: A flexible component used to restrain occupants' bodies and transmit force to seat belt anchor points. Made primarily of nylon, it measures 46-48mm in width and approximately 1.1-1.2mm in thickness. Its primary function is to effectively restrain occupants within specified elongation limits during collisions, reducing forward movement and impact forces while absorbing some energy to protect occupants. 2. Retractor: A device that fully or partially retracts seat belt webbing. Classified by function as: non-locking retractors (Type 1), manually adjusting retractors (Type 2), self-locking retractors (Type 3), emergency locking retractors (Type 4), and emergency locking retractors with higher response thresholds (Type 4N). As the core component of seat belt assemblies, retractors enable locking functionality through dozens of parts manufactured via die casting, injection molding, stamping, cold heading processes, and assembled using press riveting and ultrasonic techniques. 3. Buckle: A device that secures occupants while allowing quick release. Buckles may incorporate adjustment mechanisms, except for full harness seat belts.

4

Share

What is the battery model for the 2017 Skoda Octavia?

The original battery model for the 2017 Skoda Octavia 1.6 is Varta, with the factory part number 1J0-915-105-AC, specifications 12V-280A-60Ah-DIN. For the 2010 Skoda Octavia, the battery model is Varta L2-400. The Skoda Octavia battery has a capacity of 60Ah. To determine if the Skoda Octavia battery needs replacement, you can use the following four methods: 1. If the battery status indicator light comes on: This light indicates low battery charge. Start the engine or check the battery condition. Owners can observe the battery's condition themselves. Many modern car batteries have an inspection hole, also known as a "magic eye," located at the top right corner of the battery. Owners can check the color change in the "magic eye" to assess the battery's condition. If the color inside the "magic eye" is green, the battery is in good condition; if it is black, the battery capacity is low; if it turns white, the battery is nearly dead and needs immediate replacement. 2. Difficulty starting the vehicle: If the engine cranks weakly or requires multiple attempts to start, it may indicate insufficient battery charge. It is advisable to check the battery and observe the color change in the "magic eye" to determine if replacement is needed. 3. Hearing a "clicking" sound when starting the vehicle: This indicates severe battery discharge, requiring immediate replacement. Check the battery and observe the "magic eye" color change to confirm if replacement is necessary. If you hear a "squealing" sound during startup, this suggests a starter motor issue. It is recommended to visit a 4S shop or a certified repair shop for diagnostic checks to determine if the starter motor needs replacement. 4. During nighttime idling: If the car's alternator cannot provide enough power for the lights, the battery will supply the power. If the battery is nearing the end of its lifespan, it may not provide sufficient power, causing the lights to dim noticeably. It is advisable to replace the battery promptly to ensure driving safety.

19

1

Share

How to Use the Remote Start Function with the Bin Yue Remote Key?

What is the appropriate tire pressure for the Malibu?

How many reverse lights does the Volkswagen Polo have?

What is the difference between Volvo S90 B5 and T5?

What causes the increased engine noise in Ford Escort?

Why Won't the Rear Seat Buckle Fasten on a Volkswagen?

What is the battery model for the 2017 Skoda Octavia?

What is the fuel tank capacity of the 2016 Changan Oushang?

What Causes the Brake Pedal in an Automatic Transmission Vehicle to Be Hard to Press?

What is the emission standard for cars produced in 2016?

What model is the Haima Family?