How to use the remote start function on the 14th-generation Sylphy?

1 Answers
DelParker
07/24/25 12:21am
14th-generation Sylphy remote start usage method: 1. Point the smart key at the vehicle; 2. Press the "LOCK" button to lock all doors; 3. Within 2 seconds, press and hold the remote engine start button until the signal light flashes and the taillights illuminate. The Sylphy is equipped with an HR16 1.6L naturally aspirated engine, delivering maximum power of 91kw and peak torque of 155nm. The vehicle remote start function has some limitations on the vehicle itself, with a key point being that it can only be installed on automatic transmission models. This is because automatic transmissions come with a TCU control unit, which communicates gear position information to the ECU engine control unit. The engine will only start when the onboard computer confirms the gear is in the P (Park) position.
Was this review help?
5
3
Share
More Forum Discussions

Where is the fuel tank switch located on the Volkswagen Lamando?

The fuel tank switch of the Volkswagen Lamando is located on the center console. Below is some relevant information about the Volkswagen Lamando: Introduction: The Lamando is a compact new car launched by SAIC Volkswagen at the Chengdu Auto Show in August 2014. SAIC Volkswagen defines the Lamando as the "first wide-body coupe," which is built on the MQB platform, equipped with EA888-TSI and EA211-TSI engines, and uses a dry 7-speed dual-clutch transmission. It is positioned as a high-end, sporty compact car, situated between the Lavida and the Passat. Exterior: In terms of exterior design, the Lamando has only minor changes compared to the concept version, maintaining a very sporty appearance. The front face adopts a family-style design, with a three-bar grille connected to the headlights and round fog lights on either side of the bumper. The side profile of the car features very smooth lines, with a straight, deep waistline extending to the rear, leaving a strong impression. The rear bumper has a two-tone design at the lower end, with black accents enhancing the sporty feel.
7
1
Share

What is the weight of the Volkswagen CC body?

The weight of the Volkswagen CC body is 1545 kilograms. Below are the relevant details: Body dimensions: The body dimensions are 4799mm × 1855mm × 1417mm, with a wheelbase of 2712mm. It is a sporty sedan under the FAW-Volkswagen brand. The CC combines the stability of a sedan with the agility of a sports car, featuring a sporty interior design, genuine leather sports seats, and a genuine leather intelligent sports steering wheel. Configuration: The new generation CC is built on Volkswagen's modular transverse platform MQB-B. The transverse front engine layout provides more space between the front and rear axles, ensuring a longer wheelbase while shortening the front overhang. It comes standard with LED lighting, including dynamic light assist and AFS headlight cornering function for the LED headlights. It also features cornering lights and bad weather lights, providing corner illumination when the vehicle turns. The full LED taillights at the rear include dynamic turn signals.
15
4
Share

What is the variable phase of Audi's 2.0T engine?

Engine variable phase refers to the VVT system of the engine, which is the Variable Valve Timing system. Introduction to Engine Variable Phase: Variable phase is a device that allows the camshaft 1 to pulsate and change its timing relative to the drive sprocket 14 mounted on the short shaft 102. It includes followers 119, 110 that rotate with the respective follower shafts 103, 104 mounted on the sprocket. The followers rotate around an axis parallel to the sprocket's rotational axis. Planetary gears 106, 108 transmit rotational motion in phase from the sprocket to the camshaft via the sun gear 107. An angularly adjustable ring cam 117 has an inner contour line that meshes with the followers, periodically transmitting rotational motion to the follower shafts to alter the phase of the motion transmitted to the camshaft. Function of Engine Variable Phase: Engine variable phase is one of the new technologies gradually applied to modern cars in recent years. The use of variable valve timing technology in engines can improve intake charge, increase the charge coefficient, and further enhance the engine's torque and power.
5
1
Share

Where is the Mercedes-Benz rearview mirror heating located?

Mercedes-Benz rearview mirror heating is located on the left armrest of the driver's seat. The rearview mirror heating icon consists of three curved upward arrows paired with a rectangle, and it shares the same REAR button with the rear window defroster, heating both simultaneously. The automatic heating function activates based on the outside temperature, and turning on the air conditioning windshield heating will automatically start it. It is recommended to use the rearview mirror heating sparingly, with each use not exceeding 30 minutes, as prolonged use may affect the mirror's lifespan, clarity, and luminosity. Mercedes-Benz is a German automotive brand renowned for luxury and high performance, currently producing primarily C-Class (mid-range sedans and coupes), E-Class (premium sedans and coupes), S-Class (luxury sedans and coupes), and G-Class (SUV off-road vehicles).
2
5
Share

What type of battery is used in the Passat hybrid?

The Passat hybrid uses a ternary lithium-ion battery. Ternary lithium-ion battery: A ternary lithium-ion battery refers to a lithium-ion battery that uses a ternary cathode material composed of lithium nickel cobalt manganese oxide (NCM) or lithium nickel cobalt aluminum oxide (NCA). The ternary composite cathode material is made from nickel salts, cobalt salts, and manganese salts as raw materials, and the ratio of nickel, cobalt, and manganese can be adjusted according to actual needs. Battery performance: This material offers a balanced performance in terms of capacity and safety, with better cycle performance compared to conventional lithium cobalt oxide. Initially, due to technical limitations, its nominal voltage was only 3.5-3.6V, which restricted its application range. However, with continuous improvements in formulation and structural optimization, the nominal voltage of the battery has now reached 3.7V.
13
5
Share

What causes the metallic rattling sound when starting the X-Trail?

The reasons for the metallic rattling sound when starting the X-Trail are as follows: Door rattling: If it's coming from the door, since the door structure is relatively simple, first check if it's because the screws are not tightened properly. Sunroof rattling: If the vehicle is equipped with a sunroof, check if the sunroof is making noise. Sunroof rattling is generally quite common, as in older vehicles, small stones or dust can accumulate in the sunroof tracks over time, leading to poor sealing and resulting in noise. This issue isn't actually a major problem; even luxury cars like BMW and Mercedes can experience sunroof rattling.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.