How to Use the Remote Start Function of the Honda Avancier?

1 Answers
SanLawson
07/30/25 7:24am
To remotely start the Honda Avancier, first press the lock button, then press the button with the circular arrow symbol to activate the engine. The steps for using the remote start function on the Honda Avancier are as follows: 1. On the multimedia information screen, navigate to Vehicle > Smart Key System Settings > Remote Start System On/Off. 2. When using remote start, the exterior lights will flash as a signal, and the engine will idle for 10 minutes. If the brake pedal is not pressed and the ignition switch is not activated within this time, the engine will shut off. 3. Performing the remote start operation again within the 10-minute window can extend the idle time by another 10 minutes. Upon successful extension, the exterior lights will flash 6 times as a notification.
Was this review help?
12
0
Share
More Forum Discussions

What is the fuel consumption of the 250nk?

The fuel consumption of this motorcycle is between 3.2-3.6L per 100 kilometers in urban areas. The fuel consumption of a motorcycle is not only related to the motorcycle itself but also closely tied to the rider's driving habits and the road conditions. The reasons for increasing fuel consumption are as follows: 1. Temperature effects causing fuel consumption fluctuations: Generally, in winter when temperatures are low, fuel consumption increases, almost comparable to the consumption when using air conditioning in summer. This is because lower temperatures cause the engine to dissipate more heat. 2. Lack of regular vehicle maintenance: Dirty engine oil and air filters can also lead to increased fuel consumption. Dirty oil results in poor lubrication, increasing resistance in the engine's moving parts and requiring more energy to overcome this resistance, thus raising fuel consumption. 3. Spark plug replacement needed: Spark plugs are often overlooked. Even if they can still function, worn spark plugs may cause delayed ignition due to insufficient energy, missing the optimal ignition timing.
16
2
Share

What is the incorrect statement about escape ramps?

Regarding the incorrect statements about escape ramps, one is that when a large truck rushes onto an escape ramp, all its kinetic energy is converted into gravitational potential energy. In reality, a portion of the kinetic energy is also converted into internal energy. Below is some information about escape ramps: 1. Main function: The primary purpose of an escape ramp is to allow out-of-control vehicles to divert from the main traffic lane, preventing interference or threats to other vehicles on the main road. It also assists the out-of-control vehicle in achieving a relatively smooth deceleration and stop, avoiding injuries or significant vehicle damage. 2. Precautions: When driving through such sections, drivers should pay attention to the emergency escape ramp signs to change lanes in advance if necessary. Additionally, once the vehicle enters the emergency escape ramp, the driver should quickly shift the transmission to a lower gear to ensure rapid speed reduction. When the speed drops below 30km/h, the hand brake can also be used to bring the vehicle to a complete stop.
15
1
Share

What Causes Increased Engine Oil Level and Emulsification in the 2021 Toyota Models?

Reasons for increased engine oil level and emulsification: 1. Increased engine oil level: When the engine frequently operates under low-temperature and low-speed conditions, the oil temperature does not rise sufficiently. Water and gasoline mixed in the oil fail to evaporate, accumulating over time and causing the oil level to increase. 2. Engine oil emulsification: The essence of oil emulsification is the mixing of water and oil, resulting in a white emulsion. The causes of oil emulsification include the condensation of water vapor in the crankcase under low temperatures, which then permeates into the oil, and the tendency of ethanol gasoline to absorb moisture, introducing water from the air into the engine cylinders. When a vehicle operates for extended periods under low-temperature and low-speed conditions, the water cannot evaporate and remains trapped in the oil, leading to emulsification issues when mixed together.
17
0
Share

What is the windshield wiper size conversion chart?

Windshield wiper size and length conversion: 14"--350mm; 16"--400mm; 18"--450mm; 20"--500mm; 21"--525mm; 22"--550mm; 24"--600mm; 26"--650mm. For every additional inch in wiper size, the length increases by 25mm. Methods for selecting windshield wipers: 1. Wiper type: First determine the specific wiper model your vehicle uses by consulting the owner's manual. 2. Compatibility: Check whether the connection method between the wiper arm and the wiper blade matches your vehicle. Some arms are secured with screws while others use snap-on locks. 3. Inspection: Lift the wiper and run your fingers along the cleaned rubber blade to check for damage and elasticity. If the rubber shows signs of aging, hardening, or cracking, the wiper needs replacement.
18
2
Share

Can the first maintenance of a new car be done at any 4S store?

The first maintenance of a new car can be done at any 4S store. All 4S stores nationwide are interconnected, and the car manufacturer will recognize the validity of the first maintenance regardless of which store performs it. Below is a detailed introduction about the first maintenance of a new car: 1. Time: Since the engine, transmission, and other components of a new car are brand new, to maintain the service life of these parts, it is stipulated that the first maintenance should be done either 3 months after purchasing the new car or when the mileage reaches 5,000 kilometers. 2. Main content: Replace the engine oil and oil filter. Car manufacturers usually add a certain amount of friction modifiers to the engine oil installed in the car to facilitate the smooth running-in of various engine components. Whether the oil is replaced earlier or later than recommended, it is not conducive to the normal running-in of the engine. Therefore, all vehicle brands specify the time for the first maintenance.
17
1
Share

What is the data stream channel number for the Volkswagen throttle?

The data stream channel number for the Volkswagen throttle is 060. Below is a detailed introduction about the throttle: 1. Introduction to the Throttle: The throttle is a controllable valve that regulates the airflow into the engine. There are two types: the traditional cable-operated throttle and the electronic throttle. After entering the intake pipe, the air mixes with gasoline to form a combustible mixture, which then burns to generate power. The responsiveness of the vehicle's acceleration is closely related to the cleanliness of the throttle. 2. Classification of the Throttle: There are two types of throttles: the traditional cable-operated throttle and the electronic throttle. In traditional engines, the throttle control mechanism operates via a cable (flexible steel wire) or a rod, with one end connected to the accelerator pedal and the other to the throttle linkage plate. The electronic throttle primarily uses a throttle position sensor to adjust the throttle opening angle based on the engine's power requirements, thereby regulating the amount of air intake.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.