How to Use the Remote Start Feature on the Hongqi H5?

Is it correct that you cannot renew your driver's license if the vehicle under your name has not passed the annual inspection?

It is incorrect to say that you cannot renew your driver's license if the vehicle under your name has not passed the annual inspection. The failure to conduct an annual inspection on a motor vehicle under your name has no impact on the renewal of your driver's license. However, driving an overdue uninspected motor vehicle on the road, according to the Road Traffic Safety Law, will result in a fine of 200 yuan and 3 points deducted from your driver's license. The precautions for vehicle annual inspection are as follows: 1. Clear all violation records in advance: Handling violations is the first thing to do for the vehicle annual inspection because the presence of violation records will directly lead to the failure of the material review. Therefore, before the annual inspection, you need to address all violations from the previous and current years. 2. Choosing good weather is crucial: Avoid going for inspection on rainy or snowy days, as adverse weather conditions may prevent accurate testing of the vehicle's effective braking performance. 3. Bring all necessary documents: Some car owners may find slight differences in the required materials for annual inspection after online queries. This is because each region may have specific requirements and methods, leading to variations in the needed documents. It is essential to bring all relevant vehicle materials during the annual inspection to avoid wasting time on multiple trips.

7

1

Share

What are the practical skills and methods for reverse parking?

Reverse parking skills are as follows: 1. Parking skills: The main points for deduction in reverse parking include pressing the line, the car not entering the garage, exceeding the time limit, and not driving according to the prescribed route. After the new regulations reform, reverse parking has a time limit of 210 seconds, and exceeding this time will result in failure. During the test, first reverse to the right, then to the left. Not following this sequence will result in failure. Pay attention to the 30cm margin when reversing. 2. Parking skills: The main points for deduction in parallel parking include turn signals, 30cm margin, and pressing the line. When entering the test area, turn right in advance and observe the highest point of the wiper coinciding with the roadside line to adjust the 30cm margin. When reversing, remember the first right turn point, straighten, turn left, park, turn on the left turn signal, and observe the rearview mirror when exiting to prevent the wheels from pressing the line. 3. Turning skills: The main points for deduction in right-angle turns include turn signals and pressing the line. After entering the test area, turn on the turn signal and turn it off after the voice prompt. Incorrect turn signal operation will deduct 10 points. After entering the right-angle turn, adjust the body to maintain a 30cm margin from the line. The observation point is the same as in parallel parking. When turning, slightly release the clutch to prevent stopping or stalling. Straighten the body after the rear wheels exit to prevent the wheels from pressing the line.

17

3

Share

Is the clutch engaged or disengaged when pressed down?

Pressing the clutch pedal disengages it, aiming to separate the clutch pressure plate from the clutch disc, thereby disconnecting the engine from the transmission. During startup, when the clutch is not pressed, the transmission input shaft rotates with the engine in neutral position, causing the transmission to idle. When attempting to shift gears, the first gear rotates with the engine, preventing the main gear from meshing with the secondary gear, making gear engagement impossible. Only by separating the two can gear engagement occur. The functions of the clutch are as follows: 1. Ensuring smooth vehicle startup: This is the primary function of the clutch. Before starting the car, the engine must first be started. During startup, the vehicle accelerates from a complete standstill. If the drivetrain (which connects the entire vehicle) is rigidly linked to the engine, engaging the transmission would cause the car to jerk forward suddenly but not start moving. This is because the transition from standstill to sudden movement generates significant inertial force, creating a substantial resistance torque on the engine. Under this inertial resistance torque, the engine's speed drops sharply below the minimum stable speed (typically 300-500 RPM), causing the engine to stall and fail to operate, thus preventing the car from starting. 2. Enabling smooth gear shifts: During driving, to adapt to changing conditions, the drivetrain frequently needs to switch between different gears. Shifting in a manual transmission typically involves moving gears or other shifting mechanisms to disengage the current gear pair and engage a new one. Before shifting, the clutch pedal must be pressed to interrupt power transmission, facilitating the disengagement of the current gear pair and allowing the new gear pair to synchronize speeds gradually. This significantly reduces engagement shock, ensuring smooth gear shifts. 3. Preventing drivetrain overload: During emergency braking, without a clutch, the engine would rapidly decelerate due to its rigid connection with the drivetrain. This would generate substantial inertial torque (potentially exceeding the engine's maximum operating torque) in all moving parts, subjecting the drivetrain to loads beyond its capacity and causing component damage. The clutch mitigates this risk by allowing relative movement between its driving and driven parts, absorbing the excess torque.

13

5

Share

Is the speed limit for large trucks on highways 100 or 80?

Large trucks on highways have speed limits of both 100 and 80. The following are the relevant regulations: 1. Regulation 1: Highways shall indicate the speed limits for each lane, with the maximum speed not exceeding 120 kilometers per hour and the minimum speed not less than 60 kilometers per hour. 2. Regulation 2: On highways, the maximum speed for small passenger vehicles shall not exceed 120 kilometers per hour, other motor vehicles shall not exceed 100 kilometers per hour, and motorcycles shall not exceed 80 kilometers per hour. 3. Regulation 3: For roads with 2 lanes in the same direction, the minimum speed for the left lane is 100 kilometers per hour; for roads with 3 or more lanes in the same direction, the minimum speed for the leftmost lane is 110 kilometers per hour, and the minimum speed for the middle lane is 90 kilometers per hour. If the speed limit indicated by road signs is inconsistent with the above lane speed regulations, the speed limit indicated by the road signs shall be followed.

8

5

Share

What to Do If Cockroaches Get Inside the Car?

Here are methods to eliminate cockroaches: 1. Cockroach spray: Spray cockroach spray, also known as insecticide, into the corners of the car, then close the windows and wait for a day to kill the cockroaches. However, this method is not long-lasting, and chemical products can be somewhat harmful to humans. Note that after using the spray, ensure proper ventilation before entering the car, and clean up the dead cockroaches. 2. Cockroach bait or gel bait: Place some cockroach bait or gel bait in corners where cockroaches might appear, such as door gaps, under seats, or in the trunk, to act as a lure. Be cautious to prevent children from touching or ingesting it. 3. Soapy water: If you spot cockroaches, you can directly spray hot soapy water on them, as it can repel and kill them.

4

3

Share

What Causes Cadillac's Low-Speed Jerking?

It may be due to engine oil passage blockage or transmission damage. Below are relevant extended details: 1. Engine oil passage blockage: The combustion of fuel, which is the power source of the engine, is determined by the engine's ignition, air intake, and fuel injectors. If the air intake decreases, ignition weakens, or fuel injection reduces, insufficient power will result, leading to a jerking sensation. 2. Transmission damage: Persistent dirt and impurities inside can cause a jerking sensation. 3. During the new car break-in period: The power output and component engagement of a new car are not at their optimal levels. Additionally, the transmission computer has a self-learning mechanism that continuously adjusts oil pressure for gear shifting, resulting in a jerking sensation.

2

3

Share

How to Use the Remote Start Feature on the Hongqi H5?

Is it correct that you cannot renew your driver's license if the vehicle under your name has not passed the annual inspection?

What are the practical skills and methods for reverse parking?

Is the clutch engaged or disengaged when pressed down?

Is the speed limit for large trucks on highways 100 or 80?

What to Do If Cockroaches Get Inside the Car?

What Causes Cadillac's Low-Speed Jerking?

What is the ground clearance of the Enclave?

What is the fuel tank capacity of the Changan Eado XT in liters?

What Causes the Loud Engine Noise in the Regal?

How to Remove the Headlights of a Honda Fit?