···
Log in / Register

How to Use the Remote Start Feature on BMW X7?

4 Answers
TuckerLee
07/29/25 11:34pm
Usage of BMW X7 remote start: As long as you have the car key with you and are near the vehicle, you can directly press the black button on the door handle without using the key. The BMW X7 key fob has four buttons: unlock, lock, trunk release, and panic button (for locating the car). Taking the 2021 BMW X7 as an example, its body dimensions are 5163mm in length, 2000mm in width, and 1835mm in height, with a wheelbase of 3105mm and a fuel tank capacity of 83 liters. This model is equipped with a 3.0T turbocharged engine, delivering a maximum power of 250kW and a maximum torque of 450Nm, paired with an 8-speed automatic transmission.
Was this review help?
8
0
Share
VonIsabel
08/16/25 2:28am
I've been driving a BMW X7 for two years now, and the remote start feature is incredibly handy. Take out the car key, press the lock button once, then hold down the circular arrow start button for about two to three seconds. Wait for the car lights to flash twice, and the engine will start. In summer, the car is cool as soon as you get in, and in winter, preheating the car is a breeze. However, make sure the vehicle is in an area with good signal for a successful start, and the fuel tank shouldn't be too low, otherwise the engine will automatically shut off. Also, remember to preset the air conditioning temperature in the car's system beforehand so that the AC automatically turns on during remote start. It's best to try it a few times in a safe place to get familiar with it before regular use—it's super convenient.
Was this review help?
15
2
Share
Expand All
DawsonMarie
10/19/25 2:45am
Last week, I just helped a friend figure out the remote start function on his BMW X7, and it turned out to be quite simple. First, make sure your vehicle is equipped with and has activated the Professional ConnectedDrive services, which needs to be set up in advance at the dealership. Then, you can use the original key: press the lock button once, immediately hold down the start button, and when you see the turn signals flash, it means the engine has successfully started. The engine will automatically shut off after running for 15 minutes by default, but you can also turn it off early by pressing the unlock button. If you use the smartphone app, it's even more convenient. Open the BMW ConnectedDrive app, log in to your account, select the vehicle page, and there's an engine start button. However, note that the vehicle cannot be locked for more than three days or have a low battery, otherwise it might not start.
Was this review help?
6
5
Share
Expand All
LaKayden
12/02/25 3:21am
I remember the first time I used BMW's remote start, I thought the key was pretty cool. When you use the car key, hold down the lock button and then press the start button for about five seconds. If the lights flash, it means the engine has started. Remember, it works within a range of several dozen meters, and might not function well in basements. After starting, the car's air conditioning will automatically turn on to the temperature you last set, which is especially useful in winter. Once, I remotely warmed up the car ten minutes in advance during a snowfall, and when I got in, the steering wheel and seats were warm—pure bliss. However, if you don't use the car for a long time, it's recommended to turn off the remote start in the car's system to save battery.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

What are the steps to park and turn off the Nissan Teana?

Press the brake pedal and wait for the vehicle to come to a complete stop. Engage the parking brake by pressing the [P] button on top of the gear shift lever. After parking in P gear, locate the [Electronic Parking Brake] button on the left side of the driver's seat. Turn off this button to shut down the engine.
1
1
Share

What is the method for replacing the battery in a BMW 5 Series remote?

BMW 5 Series remote battery replacement method is: 1. Press the small button on the back of the car key, grip the upper key handle and pull out the BMW metal mechanical key upwards; 2. Use the extracted mechanical key to pry open the operation hole of the remote key, then open the car key cover after a gap appears; 3. Remove the lifted battery casing; 4. Take out the old battery and replace it with a new one, ensuring the battery's positive pole faces downward during installation; 5. Reattach the key back cover; 6. After installation, verify that all buttons on the key function properly. Taking the BMW 5 Series 2021 model as an example, its body dimensions are: length 5106mm, width 1868mm, height 1500mm, wheelbase 3105mm, fuel tank capacity 68 liters, and curb weight 1705kg.
19
5
Share

How to Deal with Common Starting Failures of Roewe i5?

Drain all the water from the starter completely. Do not attempt to start the engine, as this can easily damage the valves. The spark plug is a critical component of the ignition system, which in turn is essential for the engine's operation. The performance of the spark plug directly affects the vehicle's working efficiency and overall performance. After removing the spark plug, disconnect the fuel injector connector, and then activate the starter. Check for any water in the cylinders, drain it completely, replace the engine oil, reinstall the spark plug and fuel injector connector, and then start the engine.
3
2
Share

What to do if the Roewe i5 has severe low-speed jerking?

Most of the time, it is because the transmission's response speed is not fast enough, and the upshift speed cannot keep up with the throttle input, so there is a jerking sensation at the moment the transmission shifts gears. Most of the time, it is due to the intervention of the energy recovery system, which places some burden on the engine and affects the engine's speed, resulting in a jerking sensation. Because when driving at low speeds, the gears frequently switch between first and second gear, and the power transmission cannot be smoothly completed in a short time, this causes the common low-speed jerking. Turbocharger intervention
16
5
Share

How to Use the Defogging Function in Civic?

Located in the center console button area, there are defogging function buttons for the front windshield and rear windshield. Press the corresponding switch to activate the defogging function. Simply increase the temperature to turn on the warm air. Additionally, turn off the car's A/C button to save energy. On both sides of the middle part of the screen, there are "+" and "-" buttons. Single press "+" or "-" Long press the color bar on the left to slide and adjust the temperature.
1
0
Share

How to Set Up Automatic Car Locking After Leaving the Sagitar?

Park the car and ensure all doors and the rear hatch are closed. Turn the ignition switch to the ON position. Within 20 seconds of turning the ignition switch to the ON position, press and hold the lock side of the door lock switch. After about 8 seconds, you should hear a beep. Refer to the user manual for the function setting number, then press the unlock side of the door lock switch once to activate the automatic door locking function. After changing the function settings, you will hear a beep after 3 seconds. Most models come with an automatic door locking feature and do not require manual setup.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.