How to Use the Rearview Mirror Folding Switch on the Haval H6?

What is the operation method of wheel alignment?

The wheel alignment operation process is as follows: 1. Drive the vehicle onto the four-post alignment lift and check the tire pressure and vehicle height. 2. Lift all four wheels off the ground for the next step of inspection. 3. Check the tires for irregular wear, deformation, etc. If the wear reaches the acceptable minimum standard, data can be measured. 4. Inspect the upper and lower suspension, stabilizer bar, subframe, and chassis for any deformation or looseness. 5. Check the rear axle, lateral control rod, and rear tie rod for deformation and whether the rubber bushings are loose. 6. After confirming no abnormalities, lower the vehicle and shake it several times to ensure the suspension system is in normal condition. Then, remove the wheel alignment locking pins. 7. Turn on the computer and prepare for the detection process. Secure the steering wheel, install the wheel alignment sensors, connect the cables, and enter the wheel alignment detection system. Follow the computer's operating sequence to read the data. 8. Based on the deviation of the alignment angle data, determine whether adjustment or replacement of parts is necessary. 9. Adjust the alignment angles starting from the rear wheels to the front wheels. The front wheel toe angle should be adjusted last, as adjustments to other alignment angles can align the thrust angle with the vehicle centerline, which will affect the front wheel toe. 10. Rear wheel camber adjustment: Install the camber adjustment tool on the shock absorber and tighten or loosen it according to the required alignment angle. 11. Adjust the rear wheel toe: The toe can be increased or decreased by adjusting the length of the lateral control rod.

17

0

Share

Why can't I play music when my Lynk & Co is connected to Bluetooth?

If you cannot listen to music after connecting your Lynk & Co 03 to Bluetooth, it may be because the Bluetooth volume on your phone or the car's audio system is not turned on, or the connection between the car's Bluetooth and your phone's Bluetooth is not properly established. Here are other reasons why there might be no music when connected to Bluetooth: Incompatible pairing code: If the sound is turned on but you still can't play music, it might be due to an incompatible pairing code between the music playback program and the car. In this case, you can still answer calls but cannot play music. It is recommended to change the car's Bluetooth playback audio settings; after changing, the music playback function should work normally. Music option not enabled: If you are playing music on your phone but there is no sound in the car, it is likely because the music option on the car's audio system is not turned on. Once enabled, the music should play.

5

4

Share

What type of transmission fluid is used for the Mazda CX-4?

The Mazda CX-4 uses ATF-FZ transmission fluid. Types of transmission fluid: Transmission fluids are generally divided into three types: manual transmission fluid (commonly known as gear oil), automatic transmission fluid (commonly known as ATF), and continuously variable transmission fluid (commonly known as CVTF). Performance and maintenance methods of transmission fluid: Transmission fluid reduces friction and wear, controls clutch friction and synchronizer performance. It also bears loads (low-speed high torque, vibration loads), dissipates heat, reduces vibration and noise, and cleans contaminants from gear meshing (cleaning function). Additionally, it prevents corrosion, pitting, and surface metal tearing, isolates metal surfaces, and prevents direct metal-to-metal contact. When experiencing body shaking, gear-shift hesitation, or a transmission high-temperature warning on the dashboard, the transmission fluid should be replaced promptly.

2

4

Share

What are the reasons for the loud engine noise in the Trumpchi GS4?

The reasons for the loud engine noise in the Trumpchi GS4 are: 1. Insufficient engine oil or cold engine oil not yet warmed up, leading to inadequate oil pressure; 2. Presence of impurities or excessive dirt in the engine oil, preventing effective regulation of oil pressure; 3. Mechanical interference in the engine or blockage in the lubrication circuit. The Trumpchi GS4 is a compact SUV under GAC Motor, equipped with a 1.5T turbocharged engine delivering a maximum horsepower of 169 PS, a maximum power of 124 kW, and a maximum power speed of 5000 rpm. It features a MacPherson independent front suspension and a multi-link independent rear suspension.

1

4

Share

How to Turn on the Heating in BYD S6?

To turn on the heating in a BYD S6, rotate the temperature control knob to the red zone and then turn on the fan speed switch. Taking the 2014 BYD S6 Manual Flagship model as an example, it is a mid-size SUV with body dimensions of 4810mm in length, 1855mm in width, and 1725mm in height, a wheelbase of 2720mm, and a fuel tank capacity of 72 liters. The 2014 BYD S6 Manual Flagship is equipped with a 1.5L turbocharged engine, delivering a maximum power of 113 kW at 5200 rpm, paired with a 6-speed manual transmission.

11

5

Share

Where are the Mazda 6 sunroof drainage outlets located?

The Mazda 6 sunroof has one drainage outlet at each of the four corners of the sunroof. When you open the sunroof, you can easily see four small holes, each connected to a hose that leads to the front and rear of the car. If these drainage holes at the four corners become blocked, water cannot drain properly and may seep into the interior. The hazards of blocked drainage outlets and cleaning methods are as follows: Hazards of blocked drainage outlets: If the drainage holes at the four corners are blocked, water cannot drain properly and may seep into the interior. In severe cases, water may flow along the roof to the sunroof motor inside the car. If the sunroof motor is used while powered on, it may short-circuit and burn out. Cleaning methods: Initially, blockages occur at the entrance of the drainage holes, which can be easily seen and cleaned by opening the sunroof. Over time, debris may enter the drainage hoses and move further inside, making it harder to clear. In such cases, it is best to visit a 4S shop and have a professional technician perform the cleaning.

16

2

Share

How to Use the Rearview Mirror Folding Switch on the Haval H6?

What is the operation method of wheel alignment?

Why can't I play music when my Lynk & Co is connected to Bluetooth?

What type of transmission fluid is used for the Mazda CX-4?

What are the reasons for the loud engine noise in the Trumpchi GS4?

How to Turn on the Heating in BYD S6?

Where are the Mazda 6 sunroof drainage outlets located?

What is the reason why the Mazda 6 P gear does not display and cannot start?

What are the differences between the Lynk & Co 03+ Yufeng Edition and the Performance Package Edition?

What are the correct steps for parking a car?

What is the 0-100 km/h acceleration time for the Fit?