How to Use the Rearview Mirror Folding Function?

1 Answers
DamianFitz
07/30/25 1:33am
Rearview mirrors can effectively prevent driving safety accidents. Below is a detailed introduction on how to use the rearview mirror: 1. Start the car and power on the vehicle; otherwise, it cannot be activated. Then, locate the window control buttons on the right side of the vehicle's armrest. 2. Next to the window buttons is the rearview mirror button. By rotating the rearview mirror knob, you can adjust the rearview mirror. 3. If you turn the rearview mirror knob to a specific position, the rearview mirror will automatically fold. This specific position can be confirmed by turning the knob.
Was this review help?
4
5
Share
More Forum Discussions

Does Slight Deformation of a Motorcycle's Steel Rim Have Any Impact?

Motorcycle steel rim slight deformation will have a certain impact on the motorcycle, causing some wobbling when riding at high speeds. Below are some relevant introductions about motorcycles: 1. Characteristics of motorcycles: Motorcycles are two-wheeled or three-wheeled vehicles driven by gasoline engines, steered by handlebars to control the front wheel. They are lightweight, flexible, fast, widely used for patrols, passenger and cargo transportation, and also serve as sports equipment. 2. Types of motorcycles: Broadly speaking, motorcycles are divided into street bikes, road racing motorcycles, off-road motorcycles, cruisers, touring bikes, etc.
3
2
Share

How to Turn on the Fog Lights of Audi Q3?

Audi Q3 fog lights are turned on by: setting the light button to the parking light or headlight position, pulling out once for the front fog lights, and pulling out again for the rear fog lights. The Audi Q3 is a compact 5-door, 5-seat SUV with body dimensions of: length 4481mm, width 1848mm, height 1616mm, and a wheelbase of 2680mm. The Audi Q3 is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, with a maximum power of 110 kW and a maximum torque of 250 Nm. Its drivetrain is front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension.
8
4
Share

What are the effects of a broken stabilizer link?

The effects of a broken stabilizer link are as follows: 1. It causes inaccurate four-wheel alignment. 2. It leads to uneven tire tread patterns or tread depths on both sides. 3. It results in unequal tire pressure on both sides. 4. It causes the front shock absorbers to fail. The functions of the stabilizer link are as follows: 1. When the horizontal heights of the left and right wheels are different, the stabilizer link generates anti-roll resistance to prevent body roll by resisting the twisting of the link. 2. When the left and right wheels pass over the same road bumps or potholes, the stabilizer link does not function. However, if the left and right wheels pass over different road bumps or potholes, it causes the link to twist, generating anti-roll resistance to suppress body roll.
4
5
Share

How to Turn On the Air Conditioning in the Excelle?

The method to turn on the air conditioning in the Excelle is: 1. Press the AC switch to turn it on; 2. Adjust the appropriate temperature and air outlet mode; 3. According to the principle that hot air rises, direct the cold air upwards. The Excelle is a compact 4-door 5-seater sedan with body dimensions of: length 4609mm, width 1798mm, height 1486mm, and a wheelbase of 2640mm. The Excelle is equipped with a 1.3T turbocharged engine and a 6-speed automatic transmission, with a maximum power of 120 kW and a maximum torque of 230 Nm. Its drive system is front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension.
4
0
Share

What is the method for replacing the oil filter?

Car engine oil filter replacement method is as follows: 1. Use a car lift to support the chassis and raise the vehicle to an easily accessible position. Pay special attention to safety to prevent sudden vehicle descent; 2. Drain the engine oil. There is an engine oil drain port under the vehicle. Simply unscrew the drain port to allow the engine oil to flow out. Observe the color of the engine oil - normal engine oil should be translucent. If it appears black, it should be replaced immediately; 3. When the flow rate from the oil drain port slows down, you can unscrew the oil filter for secondary draining; 4. After all the engine oil has completely drained, replace the oil filter. Use a filter wrench to install the new filter, tighten it, then tighten the drain plug knob, and lower the vehicle.
12
0
Share

Is the motorcycle license D or E?

Motorcycle licenses can be either D or E. Here is some information about motorcycle licenses: 1. Difference: A D license allows you to drive three-wheeled motorcycles, two-wheeled motorcycles, and light motorcycles, including the vehicles permitted under an E license as well as ordinary three-wheeled motorcycles. An E license only permits driving two-wheeled motorcycles and light motorcycles. 2. Probationary sign: When driving a motor vehicle during the probationary period, a uniform probationary sign must be affixed or hung at the rear of the vehicle. 3. D, E, and F licenses: All belong to motorcycle licenses, representing ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, and light motorcycles respectively.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.