How to Use the Pollen Filter for In-Car Air Conditioning?

1 Answers
VanJayla
07/29/25 8:56pm
Here is how to use the pollen filter for in-car air conditioning: 1. Under the right windshield of the vehicle, open the engine hood, and switch the air conditioning between internal and external circulation at the lower left side of the windshield. 2. The air conditioning filter is located under the right windshield of the vehicle. Open the engine hood, and you will find it at the lower left side of the windshield. 3. The pollen filter is a type of air purifier. It is mainly suitable for the air conditioning and ventilation circulation systems of various mid-to-high-end cars and luxury buses to achieve purification of the in-car air environment. It can effectively prevent various pollutants and exhaust gases from entering the cabin. 4. Special pollen filters can also use activated carbon technology to control harmful chemical pollutants in the vehicle's air.
Was this review help?
4
2
Share
More Forum Discussions

What Happens When the Air Filter Gets Dirty?

When the air filter becomes dirty and accumulates a large amount of dust, it obstructs the airflow, reducing the engine's air intake. This, in turn, leads to decreased engine power and increased fuel consumption during driving. The steps to replace the air filter are: 1. Open the engine hood; 2. Remove the air filter element; 3. Thoroughly clean the air filter housing; 4. Install the prepared air filter. The replacement interval for a car's air filter depends on specific conditions: 1. For vehicles frequently driven on highways, replace approximately every 30,000 kilometers; 2. For off-road vehicles operating in rural areas, replace every 2 to 3 months; 3. For city-driven vehicles, replace every 10,000 to 15,000 kilometers.
7
3
Share

How to Maintain the Air Filter?

Air filter maintenance should be performed according to the vehicle's maintenance schedule. Under normal road conditions, the air filter should be cleaned approximately every 5,000 kilometers. In areas with high dust, sand, or poor air quality, the maintenance interval should be shortened accordingly, and it is recommended to clean it every 3,000 kilometers. The car's air filter should be replaced every 20,000 kilometers. The air filter is a component that removes particulate impurities from the air inside the vehicle, effectively reducing the entry of pollutants through the heating, ventilation, and air conditioning system, and preventing the inhalation of harmful pollutants. The car air filter is an automotive accessory, consisting of a filter element and a housing. Its main requirements are high filtration efficiency, low flow resistance, and the ability to operate continuously for extended periods without maintenance.
1
0
Share

What is the engine model of the Peugeot 408?

The engine model of the Peugeot 408 is CVTSⅡ, which is made of light alloy material. The intake camshaft is equipped with a continuous variable valve timing system that can adjust the intake volume according to driving conditions, with a variable angle of up to 50 degrees, ensuring smooth and powerful engine power output and providing excellent acceleration performance for drivers under normal driving conditions. Taking the 2020 Peugeot 408 as an example, it belongs to the compact car category, with a body size of 4750mm in length, 1820mm in width, and 1488mm in height, a wheelbase of 2730mm, a fuel tank capacity of 53 liters, and a curb weight of 1325kg. The front suspension of this car is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.
12
1
Share

Can I Apply for Reconsideration If I Ran a Red Light While Following a Large Vehicle?

Running a red light while following a large vehicle can be appealed. Generally, if a motor vehicle is photographed running a red light while following a large vehicle, it is often due to rushing through the intersection. Such behavior can only be penalized as running a red light. However, if it is confirmed that the signal light was obstructed by the large vehicle, you can apply for reconsideration after being penalized. Drivers should maintain sufficient visibility to ensure they can see the traffic signals ahead and maintain a safe braking distance. Penalty Points for Running a Red Light: According to Article 2, Section 1, Clause 2 of the 'Scoring Standards for Road Traffic Violations,' driving a motor vehicle in violation of traffic signal lights will result in a penalty of 6 points. Article 3, Section 1, Clause 8 states that driving a motor vehicle in violation of prohibition signs or markings will result in a penalty of 3 points. How to Check for Red Light Violations: You can check for red light violations through the 'Traffic Management 12123' app. After opening the app, log in using your ID card, then find and click on the 'Violation Handling' option. Under 'Violation Handling,' you can view the current status of your vehicle. If there are any violations, the specific details will be displayed. You can also check at the service halls of traffic police branches in various districts and counties by using the touch query terminals. Alternatively, visit the official websites of the local Public Security Bureau's Traffic Management Bureau, locate the 'Vehicle Violation Query' section, enter your license plate number and vehicle engine number, and click 'Query' to check.
14
2
Share

What is the wiring method for the four wires of an oxygen sensor?

The four wires of an oxygen sensor are divided into two types: heater wires and signal wires. The heater wires refer to the power supply and ground wires for the heating coil, both of which are connected to the engine's computer, allowing the car's oxygen sensor to enter the working state more quickly. The other two signal wires are connected to the vehicle's power supply and serve to control the air-fuel ratio, thereby improving the quality of fuel combustion in the car's engine. The oxygen sensor is installed in front of and behind the three-way catalytic converter. The oxygen sensor in front is called the front oxygen sensor, while the one behind is called the rear oxygen sensor. The main function of the front oxygen sensor is to detect the oxygen content in the exhaust; the ECU can adjust the air-fuel ratio based on the data transmitted by the front oxygen sensor. The main function of the rear oxygen sensor is to detect whether the three-way catalytic converter has failed.
1
3
Share

How to Replace the Air Conditioning Filter for the 2012 New Focus?

The air conditioning filter for the 2012 New Focus is located at the front of the passenger seat. Below are detailed instructions for replacing the air conditioning filter: 1. Prepare the replacement tools and a new air conditioning filter: When the filtering function of the air conditioning filter deteriorates, prepare a flashlight, soft pad, and screwdriver tools for replacement. 2. Locate the air conditioning filter and remove the old one: The air conditioning filter for the Ford New Focus is situated under the glove box on the passenger side. After the car engine has cooled, open the passenger door, move the passenger seat all the way back, pinch the two yellow clips and twist them downward to reveal the air conditioning filter cover. Open the cover to expose the filter, then remove it. 3. Installation of the air conditioning filter and precautions: The installation angle of the air conditioning filter is quite tricky. Do not worry too much about the deformation of the filter when pulling it out or installing it. After installation, the filter will naturally expand and will not affect its use. Once installed, simply cover the air conditioning filter cover.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.