How to Use the Passat Wiper?

1 Answers
MacTeagan
07/28/25 6:40pm
Passat wiper usage method: The wiper switch is located on the right-hand stalk of the steering wheel. Simply move it up or down to activate the wiper. Moving it upwards triggers a single wipe, while moving it downwards adjusts the wiper frequency. For detailed wiper operation instructions, it is recommended to refer to the vehicle's manual. The wiper is a blade structure installed in front of the windshield, consisting of components such as an electric motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. The Passat is a mid-size sedan designed by Volkswagen AG in Germany, classified as a B-segment car in Volkswagen's lineup. In terms of body dimensions, the Passat measures 4870mm in length, 1834mm in width, and 1472mm in height, with a wheelbase of 2803mm. The Passat PHEV is largely similar in appearance to the fuel version but includes some PHEV-specific identity markers, such as exclusive body emblems. On the sides of the body, PHEV side badges are added to both front fenders. Additionally, this model features PHEV-specific low-drag wheels.
Was this review help?
19
5
Share
More Forum Discussions

How to Read the Vehicle Identification Number?

Vehicle Identification Number (VIN) is unique and consists of 17 digits or letters, which can be found on the vehicle's registration certificate. More details about the VIN are as follows: 1. Meaning of the characters: Each character in the VIN has its unique meaning. The most commonly used is to identify the manufacturing year, which is the 8th character from the end. According to practical needs, the manufacturing year is marked in a 30-year cycle. 2. Lower left corner of the windshield: You can also find the VIN by carefully searching the lower left corner of the front windshield on the vehicle body. 3. Bottom of the B-pillar near the passenger door: The VIN can also be found at the bottom of the B-pillar near the passenger door, where there is a prominent vehicle nameplate when the door is opened.
11
0
Share

Where should I go to reissue a lost motor vehicle driver's license?

According to the regulations on the application and use of motor vehicles, you can apply for a replacement motor vehicle driver's license at any vehicle management office or traffic management department of the public security authority nationwide. You can also apply for a replacement through software by downloading and installing the "Traffic Management 12123" app and completing the process online. Additional information: The required procedures for replacing a motor vehicle driver's license include: the motor vehicle driver's physical condition certificate, the driver's ID card, and four recent one-inch bareheaded photos of the driver. With these documents, you can apply for a replacement motor vehicle driver's license. It is recommended to apply for the replacement at a vehicle management office or traffic management department of the public security authority, where the process is immediate and will not affect the use of the license.
17
3
Share

Must the appeal for Subject 3 be filed on the same day?

Generally, the appeal authority will make a decision within 30 days from the date of acceptance. The deadline for the vehicle owner to submit an application is 60 days from the date of becoming aware of the penalty decision. Below is the relevant content introduction: 1. Materials required for administrative appeal include: (1) Administrative appeal application. The application should detail the following: the applicant's basic information, including: for citizens—name, gender, age, ID number, workplace, residence, postal code; for legal entities or other organizations—name, address, postal code, and the name and position of the legal representative or principal person in charge; the name of the respondent, i.e., the administrative authority that issued the penalty decision. The appeal request, main facts, and reasons for the appeal; the applicant's signature, seal, and the date of appeal submission. (2) Penalty decision notice. (3) Other factual materials that support the applicant's claim. 2. Relevant regulations: The higher authority responsible for the appeal should review the application within 5 days of receipt and decide whether to accept it. If no decision to reject is made within the deadline, it is deemed accepted. Generally, the appeal authority should make a decision within 30 days from the date of acceptance.
19
4
Share

Is it a violation to reverse a little at a traffic light?

Reversing at a traffic light is a violation because it is not allowed to reverse at railway crossings, intersections, one-way roads, bridges, sharp turns, steep slopes, or tunnels. It will result in a deduction of 3 points and a corresponding fine. Below is the relevant content introduction: 1. Relevant regulations: If you cross the stop line after the light turns red and the entire vehicle moves onto the pedestrian crossing, then reverses back, strictly speaking, it is not considered running a red light, but it still violates the regulations. 2. If you are judged to have run a red light, you can appeal because running a red light requires three photos: (1) The front of the vehicle has already crossed the stop line. (2) The entire vehicle body has crossed the stop line and is in the corresponding red light position. (3) The entire vehicle has crossed the stop line but has not stopped, and the vehicle is entering the intersection or turning.
14
5
Share

Does Having Different Tire Models Affect the Car?

Tires of different models can increase the car's fuel consumption, alter the mileage, fail the annual inspection, and affect the accuracy of the odometer, making it difficult to determine the maintenance cycle. It may also lead to phenomena like 'tire wear' or 'pulling to one side,' and reduce the tire's service life. Specific impacts of having different tire models: Original tires are more in line with fuel consumption standards. Larger tires mean heavier weight, consuming more fuel during driving. Changes in mileage occur because altering the tire and wheel size changes the tire's diameter and radius, thus altering the circumference. This affects the rotation speed and the distance covered per rotation, leading to noticeable changes. Failing the annual inspection is due to Article 16, Clause 1 of the 'Road Traffic Safety Law of the People's Republic of China,' which states that no unit or individual may assemble a motor vehicle or alter its registered structure, construction, or features without authorization. Precautions when replacing car tires: When selecting tires, the specifications should match the previous tires and must be the same as the other tire on the same axle, including speed rating, load index, tread pattern, brand, size, etc., to ensure safe driving. The valve stem should also be replaced because, after changing the tire, the aging cycles of the new tire and the old valve stem differ. Issues with the valve stem may arise during the new tire's lifespan, which are not easily noticeable. Therefore, it's best to replace the valve stem when changing tires. Installation direction and inflation: If using the original tires, follow the manufacturer's installation requirements. For non-original tires, the side with the production date usually faces outward. For directional tires, align the arrow on the wheel with the car's forward direction. Inflate to the maximum pressure allowed by the tire, then reduce to the manufacturer's specified standard pressure.
13
3
Share

What are the regulations for motor vehicle annual inspections?

Here is the relevant introduction to the annual inspection regulations and procedures: 1. Relevant regulations: Passenger vehicles for commercial use must be inspected once a year within 5 years; after 5 years, they must be inspected every 6 months; trucks and large and medium-sized non-commercial passenger vehicles must be inspected once a year within 10 years; after 10 years, they must be inspected every 6 months; small and micro non-commercial passenger vehicles must be inspected once every 2 years within 6 years; after 6 years, they must be inspected once a year; after 15 years, they must be inspected every 6 months. 2. Vehicle annual inspection procedures: The vehicle owner or unit must fill out the "Motor Vehicle Annual Inspection Form" and send the vehicle to the designated location for inspection on the date specified by the local vehicle management office. After the vehicle passes the inspection, the vehicle management authority will affix a seal on the vehicle's registration certificate and the "Motor Vehicle Annual Inspection Form".
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.