···
Log in / Register

How to Use the Passat Rearview Mirror Adjustment Button?

4 Answers
AddysonMarie
07/29/25 2:27pm
Rotate the knob to "L" to adjust the angle of the left rearview mirror. Rotate the knob to "R" to adjust the angle of the right rearview mirror. Rotate the knob to "0" to adjust the angle of the left rearview mirror. Press the up, down, left, and right buttons to adjust the rearview mirror to move up, down, left, or right respectively.
Was this review help?
1
0
Share
DeGeorge
08/13/25 6:46am
Using the Passat's mirror adjustment button is quite simple, and here's how I do it: First, locate the round button on the door armrest, which has a small icon indicating mirror selection. Rotate the button to point the arrow to 'L' for the left mirror, then press the up, down, left, or right arrows to adjust the angle until you can clearly see the rear vehicles and blind spots from inside the car. After adjusting, rotate to the 'R' position to set the right mirror. Remember, it's best to adjust while the car is parked in a safe place—don’t do it while driving, as distraction could lead to accidents. I’ve noticed beginners often miss this: the Passat has a mirror heating function; the small symbol next to the button can activate defogging in rain or fog, making driving safer. Over time, the button may become less responsive—check for dust blockage or poor contact, and regular cleaning can prolong its lifespan. With over a decade of driving experience, I find this feature very user-friendly, but avoid over-adjusting to maintain proper visibility.
Was this review help?
14
0
Share
Expand All
AdelineMarie
10/11/25 2:29am
When adjusting the Passat's rearview mirrors, first locate the round adjustment knob on the door, usually marked with left/right indicators. My method is to select L to adjust the left mirror using the directional keys, ensuring a small portion of the car body and a wide rear view are visible, then switch to R for the right mirror. After setting the angle, test whether blind spots are covered while driving. Note that many Passat models have memory function - saved positions can be recalled with one button press, eliminating repeated adjustments. Operate the buttons gently as excessive force may damage circuits. I find the automatic heating feature excellent - simply press the icon to activate defrosting, which is practical during rainy days to reduce wiping needs. Safety first: after adjustment, confirm clear visibility with no blind spots. I recommend checking whenever drivers change, as height differences affect settings. Make it a habit to prevent accidents.
Was this review help?
7
4
Share
Expand All
EllianaLee
11/24/25 3:37am
To adjust the Passat's rearview mirrors, locate the button on the door handle. Rotate it to select the left or right mirror, then use the arrows to adjust the direction until the view is satisfactory. Keep the operation concise to avoid pressing the wrong buttons. The steps are: select mirror, adjust, test, and ensure clear visibility. By the way, the related heating function can be enabled to defog. Make sure the car is parked safely during adjustment. After completion, drive a short distance to verify.
Was this review help?
17
0
Share
Expand All
More Forum Discussions

What are the differences between the XR-V and the Vezel?

The differences between the XR-V and the Vezel are: 1. Different manufacturers: the XR-V belongs to Dongfeng Honda; the Vezel belongs to GAC Honda. 2. Different body heights: the XR-V has a body height of 1610mm; the Vezel has a body height of 1605mm. Both the XR-V and the Vezel are compact SUVs, and both are equipped with a 1.5L naturally aspirated engine, with a maximum power of 96kW and a maximum power speed of 6600rpm. The drive modes of both the XR-V and the Vezel are front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam rear suspension.
14
5
Share

How long can you wait to deal with a car accident?

According to the "Road Traffic Safety Law" enacted by the National People's Congress, vehicles can only be detained under the circumstances where traffic police collect evidence. Detention is for the purpose of gathering evidence, not for compensation. Appraisal should be commissioned within three days from the end of the accident scene investigation. The duration of inspection and appraisal should not exceed 20 days. If it exceeds, it must be reported to the higher-level public security department for approval, with a maximum extension of 60 days. Below is an introduction to vehicle insurance: 1. Compulsory Traffic Insurance: This is a mandatory insurance required by the state. If not purchased, traffic police may impose fines. This insurance offers limited compensation, mainly covering others, and does not cover the policyholder's own vehicle. 2. Third-party Liability Insurance: This is used to compensate for losses caused by the policyholder to third parties in terms of personal injury or death. It is essential to purchase this insurance as it provides protection for both the policyholder and others. 3. Vehicle Damage Insurance: This covers losses to the policyholder's own vehicle caused by natural disasters and accidents. It is recommended for new drivers. 4. No-fault Insurance: An additional insurance that transfers the policyholder's own liability to the insurance company, reducing the policyholder's losses. If both Vehicle Damage Insurance and Third-party Liability Insurance are purchased, it is advisable to also purchase No-fault Insurance.
17
3
Share

How many days after an accident must the damage assessment be completed?

Insurance companies have time limits for damage assessment, requiring them to complete the assessment within 48 hours; otherwise, the repair invoice will be used as the basis. Normally, after a vehicle accident, the insured should promptly notify the insurance company, which will then send someone to conduct an on-site investigation and take photos. If the insured is not primarily at fault, they can proceed to repair the vehicle at a 4S shop designated by the insurance company. The repair costs will be directly covered by the insurance company, which will then seek reimbursement from the primarily responsible party. Below is an introduction to vehicle insurance: 1. Compulsory Traffic Insurance: This is a mandatory insurance required by the state. If not purchased, traffic police can impose fines upon inspection. This insurance provides limited compensation, mainly covering third parties and not the insured's own vehicle. 2. Third-Party Liability Insurance: This covers losses due to bodily injury or death caused by the vehicle owner to a third party. It is essential to purchase this for protection for both oneself and others. 3. Vehicle Damage Insurance: This compensates for losses to the vehicle itself caused by natural disasters or accidents. It is recommended for new drivers. 4. No-Deductible Insurance: An additional insurance that transfers the responsibility the owner would otherwise bear to the insurance company, reducing the owner's losses. It is advisable to purchase this if both Vehicle Damage Insurance and Third-Party Liability Insurance are already in place.
5
4
Share

What kind of water should be added to the car windshield washer reservoir?

Special windshield washer fluid should be added to the car windshield washer reservoir. The functions of automotive windshield washer fluid include: 1. Cleaning performance: The surfactants in windshield washer fluid typically have wetting, penetrating, and solubilizing functions, which help clean and remove dirt; 2. Antifreeze performance: The presence of alcohol and ethylene glycol lowers the freezing point of the liquid, providing antifreeze protection; 3. Anti-fog performance: A monomolecular protective layer forms on the glass surface, ensuring clear and transparent visibility on the windshield. The windshield wiper is a blade structure installed in front of the windshield, composed of a motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly.
16
0
Share

Is it a big problem if the vehicle is flooded but not started?

If the vehicle is in a static state, meaning it is parked and flooded without the engine being started, as long as the water level does not reach the air intake of the engine's intake system, the engine will not be damaged. The position of the air intake may vary slightly among different brands and models. Generally, the air intake height is just below the engine hood, and in some models, it may be slightly lower. If the water level does not reach this height and there are no signs of water ingress in the air filter, the engine will definitely not be damaged. Below are some parking precautions: No parking in areas with no-parking signs: A no-parking sign indicates that within the specified area, all vehicles are prohibited from parking temporarily or for an extended period. No parking within yellow grid lines: Yellow grid lines indicate that parking is prohibited in this area for any reason. These are commonly found at intersections, entrances, and exits. Yellow solid lines: On roads with yellow solid lines, parking is prohibited. The length of the yellow solid line indicates the size of the no-parking area. No parking near bus stops: Parking is prohibited in areas such as bus stops, gas stations, emergency stations, fire hydrants, etc.
14
4
Share

What does steering wheel lock mean?

Steering wheel lock refers to the automatic locking function when the steering wheel is not straightened after parking and turning off the engine. The solution to unlock the steering wheel is: step on the brake, gently shake the steering wheel with the left hand while simultaneously turning the key with the right hand. Precautions for using the steering wheel include: 1. Avoid turning the steering wheel to its extreme limit; 2. Minimize forceful twisting of the steering wheel. The function of the steering wheel is to convert the force applied by the driver on the edge of the steering wheel into torque, which is then transmitted to the steering shaft. The steering transmission shaft, as a connecting component between the steering gear and the steering shaft, facilitates the standardization of the steering gear, compensates for errors during manufacturing and installation, and ensures the proper installation of the steering gear and steering wheel in the vehicle.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.