···
Log in / Register

How to Use the Pajero Headlight Automatic Cleaning Function?

5 Answers
WalterMarie
07/29/2025, 02:39 PM

The Pajero headlight cleaning function can be activated by pulling the wiper switch twice when the headlights are turned on. The headlight cleaning function automatically removes dirt and dust from the headlights at any time, enhancing safety during nighttime driving. The steps for replacing (removing and installing) the headlights are as follows: 1. Disconnect the bulb's power socket. When pulling out the bulb power socket, apply moderate force to avoid loosening the socket wiring or damaging the bulb plug. 2. After disconnecting the power socket, remove the waterproof cover behind the bulb. The headlight waterproof cover is usually made of soft rubber, though some models may have a soft plastic cover. It can be removed with a slight force. 3. Remove the bulb from the reflector. When taking out the bulb, gently pinch the wire clips on both sides until the bulb loosens, then pull it out. 4. Insert the new bulb into the reflector, aligning it with the fixed slots on the bulb base. Follow the reverse steps of removing the old bulb: pinch the wire clips, insert the bulb into the reflector, align it with the installation position, and release the clips to secure the bulb. 5. When replacing the waterproof cover, ensure the edges are fully sealed with the fixed position. Finally, reconnect the headlight power socket.

Was this review help?
16
5
Share
DelNadia
08/14/2025, 07:58 AM

I've been driving the Pajero for a while, and the automatic headlight cleaning feature is quite convenient to use. First, make sure the headlights are turned on, then locate a button with a cleaning icon on the control lever to the left of the steering wheel or near the dashboard. Press it, and water will automatically spray from below the headlights to clean the lenses, a process that takes just a few seconds. This is especially useful in rain, snow, or on muddy roads, as it promptly removes dirt and keeps the lights clear, enhancing nighttime driving safety. Remember to regularly check the fluid level in the washer tank and refill it with dedicated cleaning fluid when empty to prevent dry operation damage to the system. The nozzles may occasionally get clogged, so gently unclog them with a fine needle. I recommend performing maintenance every six months. The operation is simple and intuitive, providing great assistance for daily driving, especially during long trips when a single press does the job, making it worry-free and effortless.

Was this review help?
16
5
Share
Expand All
MilaLynn
10/14/2025, 03:25 AM

As a car enthusiast, I'm quite familiar with the Pajero's automatic headlight cleaning system. To use it, first turn on the headlights, then operate the cleaning button - typically located near the wiper control stalk or as a separate setting. When pressed, an electric pump draws fluid from the reservoir and sprays it precisely onto the headlight surface through nozzles, effectively removing dust and mud. This design ensures optimal light output, which is particularly crucial for off-road driving or in foggy conditions. For maintenance, it's important to use antifreeze washer fluid in winter to prevent freezing; if the button malfunctions, check the fuse or electrical connections for looseness. The nozzle positions are optimized for ideal water flow angles to prevent splashing. Technically, the system relies on the vehicle's electrical system, so maintaining battery health is essential. I recommend testing this function during every car wash to ensure reliability - while simple in design, this highly practical system can significantly enhance the driving experience.

Was this review help?
10
3
Share
Expand All
MacOmar
11/27/2025, 03:21 AM

I'm new to the Pajero, and the automatic headlight washer is very easy to use. First, turn on the headlights, then locate a small button near the steering wheel with a washer symbol. Press it gently, and water sprays out to clean the headlight covers automatically without any further intervention. This feature is especially useful when driving at night or in rainy or foggy weather, as it quickly restores headlight clarity and prevents blurred vision that could lead to hazards. Remember to regularly check the washer fluid reservoir and refill it with the dedicated fluid when empty. If the nozzles get clogged, simply wipe them with a soft cloth. The operation is foolproof, making it quick for beginners to master. Safety comes first—keeping headlights bright is crucial for driving. With simple maintenance, the system will work reliably for a long time, and daily use is hassle-free.

Was this review help?
9
1
Share
Expand All
SanDylan
01/17/2026, 09:56 PM

Veteran driver's tip: The Pajero's headlight washer operation is straightforward. Turn on the headlights, press the washer button, and water sprays to clean the lenses – highly practical on muddy roads. Regularly check fluid levels and top up with washer fluid; use antifreeze type to prevent winter issues. For clogged nozzles, perform simple cleaning. Avoid frequent use at high speeds to prevent distraction. Safe driving relies on clear lighting – this reliable feature has caused no major issues over years of use.

Was this review help?
19
1
Share
Expand All
More Forum Discussions

How Often Should Engine Cleaner Be Used?

Engine cleaner should be used once every two years. Cleaning the lubrication system, intake tract, and combustion chamber is essential. However, under normal vehicle operating conditions, engine cleaning is generally considered every 30,000 to 50,000 kilometers. When a car starts, especially during a cold start, the engine is highly susceptible to wear because the oil cannot provide immediate effective protection. Dirty oil can lead to insufficient oil pressure, causing hydraulic lifter valves to fail, which may result in engine noise, unstable idle, and reduced engine power. Internal cleaning is the key to engine maintenance, typically performed using a non-disassembly cleaning method during oil changes. The general procedure involves pouring professional engine cleaner into the oil filler port, mixing it with the old oil, idling the engine for 20 to 30 minutes, and then draining the oil.
12
2
Share

What are the steps for starting a car?

Driving start-up steps are: 1. Press the clutch pedal deeply with your left foot, making sure the clutch pedal is fully depressed; 2. Shift into first gear, then proceed with the second gear shift until completed; 3. Turn on the left turn signal, as vehicles are usually parked on the right side, so activating the left turn signal alerts vehicles behind that you are about to start; 4. Sound the horn to alert surrounding vehicles or pedestrians; 5. Release the handbrake, stabilize the throttle and lift the clutch pedal, then start the car. Continue slowly lifting the clutch pedal with your left foot while gently pressing the accelerator pedal with your right foot. The movements should be smooth. Once the car starts moving steadily, the left foot can be removed from the clutch pedal; 6. The car starts and proceeds onto the road.
3
4
Share

What is the normal tire pressure for a spare tire?

The normal tire pressure for a spare tire is between 2.2 and 2.5 bar, and it may vary depending on the brand and model of the vehicle. Strictly speaking, tire pressure refers to the air pressure inside the tire. There is a standard tire pressure chart printed on the rear end of the driver's side door, which indicates the pressure when the tire is cold. A tire is a circular elastic rubber product mounted on various vehicles or machinery to roll on the ground. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have high load-bearing capacity, traction performance, and cushioning performance. A spare tire is a backup tire prepared for a car. In case of a flat tire or any issue with a wheel, the spare tire can promptly replace it, preventing the car from breaking down midway.
6
0
Share

How often should a car under six years old undergo annual inspection?

For cars under six years old, the annual inspection is required every two years. After six years, the inspection becomes an annual requirement. However, during these six years, owners are not entirely exempt from responsibilities. Although there is no need for an on-site inspection at a motor vehicle testing facility, owners must still visit the local vehicle management office, traffic police station, or detachment every two years to apply for the motor vehicle inspection compliance label as per the usual requirements. Vehicle annual inspection (or motor vehicle annual inspection) refers to the yearly examination of vehicles that have already obtained formal license plates and registration certificates. The purpose of the annual inspection is to check the main technical conditions of the vehicle, encourage enhanced maintenance, ensure the vehicle remains in good condition, and guarantee driving safety.
12
3
Share

How to Find the Owner's Phone Number When Your Car is Blocked?

Methods to find the owner's phone number when your car is blocked: 1. Check for a parking contact number; 2. Call 114; 3. Call the other party's insurance company; 4. Call 122, the traffic accident hotline. 122 is a service number provided by China's traffic management authorities for handling public traffic incidents. By calling 122, you can reach the traffic police by providing details such as the model, color, and license plate number of the blocking vehicle. The traffic police will then contact the vehicle owner. If the other vehicle is illegally parked and the owner refuses to move it, the traffic police may arrange for a tow truck to remove the vehicle. Alternatively, you can call the other party's insurance company, report the incident, and mention that the owner is unreachable. The insurance company will then dispatch a claims specialist and attempt to contact the owner to resolve the situation.
6
2
Share

How to Clean a Car Chassis?

Methods for cleaning a car chassis: 1. Lift the car to working height and rinse the chassis with a high-pressure water jet. Pay special attention to curved areas, edges, and fender liners, ensuring no mud or grease remains; 2. For particularly stubborn grease, use degreasing cleaner and a scraper to carefully clean until the chassis returns to its original color; 3. If rust is present, remove it with sandpaper. After cleaning, dry and wipe the chassis, then evenly spray a rust-proofing agent to form a durable protective film. Allow it to air dry naturally after completion. The chassis refers to the combination of the transmission system, running gear, steering system, and braking system in a car. It supports and mounts the engine and its components, forming the overall shape of the vehicle, bearing the engine's power, and ensuring normal operation.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.