How to Use the Paddle Shifters on the Lynk & Co 03?
4 Answers
Here are the steps to use the paddle shifters on the Lynk & Co 03: 1. First, sit in the driver's seat, fasten your seatbelt, press the brake pedal, turn the key to power on the vehicle, and then start the engine. 2. The paddle shifters are typically located on both sides of the steering wheel, in front of the wiper and turn signal controls, with one on each side for shifting up and down. Press the '+' paddle shifter and release the brake. 3. After releasing the brake, the vehicle will start moving. Gently press the accelerator, and when the RPM reaches above 2000, you can shift up again without pressing the brake. The current gear can be seen on the instrument panel, usually displayed as 1/2/3/4.
When driving the Lynk & Co 03, the paddle shift operation is quite intuitive. First, ensure the car is in automatic mode, and the left and right paddles on the steering wheel are always ready to use. The left paddle controls downshifting, while the right paddle controls upshifting. For example, when accelerating on the highway for a quick response, simply tap the right paddle to upshift, and the engine RPM will immediately rise. When going downhill or turning, use the left paddle to downshift, allowing engine braking to help control speed and save on brake wear. Remember not to manually intervene with the gears too often, as the system will automatically switch back to automatic mode to protect the engine. It's recommended to practice in open areas to get a feel for it—this enhances driving engagement and boosts the fun of control, which pairs perfectly with the sporty nature of the Lynk & Co 03.
After using the paddle shifters on my Lynk & Co 03, the driving experience has noticeably upgraded. Manual gear control brings a sense of autonomous operation, especially on mountain roads or curves—the acceleration from downshifting delivers an exhilarating push-back feeling, making it more flexible than pure automatic mode. During daily commutes, I’ve gotten used to manually downshifting to lower gears in traffic jams for smoother acceleration, which saves fuel and reduces jerking. At first, the timing of gear shifts might feel unfamiliar, but after a few tries, it becomes natural—the key is to stay relaxed and not obsess over perfection. The car’s system automatically corrects any misoperations to ensure safety. This feature truly personalizes the driving experience, especially for those who prefer active control.
I think the Lynk & Co 03 paddle shifters are easy for beginners to get started with. The operation method is very simple: there are paddle-shaped buttons on the left and right sides of the steering wheel. While driving, a light tap on the left paddle downshifts, and a tap on the right paddle upshifts. The current gear will be displayed on the gear indicator. For first-time users, try operating it when starting on a straight road or driving at a constant speed, and avoid randomly shifting gears during sharp turns or on slopes. The system is smart and will automatically protect the vehicle to prevent engine damage from excessively high RPMs. So just switch gears as needed and enjoy the sense of control—it's much more convenient than a traditional manual transmission.
