How to Use the Paddle Shifters on the 2021 Buick Regal?
2 Answers
Select the manual mode, usually via a button, then shift the gear lever to the D position, and use the paddle shifters to upshift or downshift. Specifically, first place the gear lever in the manual mode (M or S), and then freely switch to the desired gear using the paddle shifters when the engine speed is appropriate. Here are some details about the 2021 Buick Regal: 1. Introduction 1: The Buick Regal offers three engine displacement options, with two models in the 2.5L category: the 2.5G Automatic Comfort and the 2.5GL Automatic Luxury. 2. Introduction 2: Both models are equipped with a V6 SFI sequential multi-port fuel injection engine, delivering a peak power output of 112KW at 5600 RPM and a torque of 180NM at 4000 RPM, paired with a 4T65E electronically controlled 4-speed automatic transmission. 3. Introduction 3: It is well-known that Buick vehicles tend to have higher fuel consumption. However, most drivers of this model don’t mind the extra fuel expense, as they value its bold and elegant exterior design.
When I drove the 2021 Buick Regal, the paddle shifters were quite straightforward to use. First, I had to shift the gear lever into manual mode, usually marked with an 'M' next to the 'D' position. With my hands firmly on the steering wheel, the left paddle was for downshifting—each press would drop a gear. The right paddle was for upshifting, raising the gear with each press. For example, when overtaking on the highway, I’d press the left paddle to downshift, then step on the accelerator to let the RPM climb, making the car respond faster. However, in city driving, frequent shifting should be avoided to prevent excessive engine load, especially at low speeds—never downshift below first gear, or the car might jerk. When parking, remember to switch back to automatic mode for convenience. Overall, it takes a few drives to get used to the feel, but once you do, the control becomes much more intuitive.
