···
Log in / Register

How to use the one-touch window lift function with the Roewe RX5 Plus key?

4 Answers
Caleb
08/30/25 6:48am
Roewe RX5 car window control switch has two positions. The first position works like a regular power window switch, while the second position allows the window to fully open or close automatically with just one press and release. Below is an introduction about Roewe: Introduction: Roewe (ROEWE) is an automobile brand under Shanghai Automotive Industry Corporation (Group), launched in October 2006. History: Roewe's automotive technology originates from Rover, which was previously acquired by SAIC, but the brand is independently owned. Since its establishment, the brand has developed rapidly, and its products now cover the mid-size and upper mid-size car markets. Brand: Roewe's brand slogan is 'Taste, Technology, Realization,' expressing SAIC's determination and confidence to inherit advanced international automotive technology with an innovative vision, focusing on civilian vehicle technology to create a new classic international brand.
Was this review help?
12
4
Share
VanDiana
09/12/25 3:49am
If you want to know how to one-touch close all windows with the Roewe RX5 Plus key, I found the operation quite simple: just press and hold the lock button on the remote key for a few seconds, and the windows will automatically roll up. As an owner, I find this feature extremely practical, especially on rainy days or when forgetting to close the windows - a single press does the trick, saving the hassle of returning to the car. If there's no response, it might be due to weak key battery (try replacing it) or the function not being enabled in vehicle settings (you'll need to activate it in the central control menu). I've seen some owners online reporting unresponsive buttons - in such cases, check if doors are properly locked or try operating closer as remote distance might be too far. Remember, timely key battery maintenance can prevent minor malfunctions.
Was this review help?
1
1
Share
Expand All
MaryAnn
10/26/25 4:38am
The one-touch window-up feature of the Roewe RX5 Plus is quite convenient: just long-press the lock button. As a family car user, this function is a great help when taking kids out, as closing the windows prevents dust from entering. If it doesn't work, it's likely due to a remote signal issue, such as a weak key battery or interference; it could also be that the vehicle isn't properly configured, requiring a visit to the 4S store for consultation. When using it, avoid pressing from a distance—it only works up close, which also prevents the windows from getting stuck. Keep the key dry and well-maintained to extend its lifespan.
Was this review help?
8
5
Share
Expand All
LaAaliyah
12/09/25 4:57am
For the Roewe RX5 Plus's one-touch window lift feature via the key, my understanding is that the operation method involves long-pressing the lock button to close all windows. This process involves signal transmission, so it's essential to ensure the key is within range. If it doesn't work, possible reasons could be low key battery or the doors not being locked. Simply put, the function activates quickly, and during maintenance, it's good to clean the buttons regularly.
Was this review help?
11
3
Share
Expand All
More Forum Discussions

Can You Continue Driving When the Idle Oil Light Flashes?

You can drive when the idle oil light flashes, but to prevent excessive wear of the oil pump, it should be replaced promptly. Here is some extended information about idling: 1. After the engine starts, the idle control valve opens for a period to increase the air intake, raising the engine idle speed to approximately 1500r/min-3000r/min. When the engine coolant temperature is low, the idle control valve opens to achieve an appropriate idle speed. 2. The amount of oil replaced in the car should be slightly lower than the mark on the oil dipstick. Excessive oil increases the rotational resistance of the crankshaft, reduces the engine's output power, and the excess oil may enter the combustion chamber, leading to oil burning, blue smoke emission, and increased fuel consumption.
8
2
Share

What are the six methods for throttle body matching?

There are six methods for throttle body matching, including manual matching, etc. Manual Matching: Some vehicles use cable-operated throttle bodies. After replacing the throttle body, you can manually match it by turning the ignition key on and off several times. The vehicle's computer will delete the old throttle body's memory and store the new throttle body's data. If the vehicle runs normally, the matching is complete. Battery Disconnect Matching: After replacing the throttle body, disconnect the negative terminal of the battery and wait for one minute before reconnecting it. This process will clear the vehicle computer's original memory and restore it to factory settings. If the vehicle starts and runs normally, the matching is successful. This method is suitable for low-end vehicles and should not be used for high-end vehicles. Diagnostic Tool Matching: After replacing the throttle body, you can use a specialized automotive diagnostic tool for matching. Enter the system, select action test, and click on "adaptive value reset." Repeat this process several times. If the vehicle starts and runs normally, the matching is successful. Old Throttle Position Sensor Matching: After installing a new throttle body, if you encounter issues like unstable idle speed or excessively high idle speed, you can unplug the new throttle position sensor and plug it into the old throttle position sensor. Start the vehicle and let it run normally, then turn off the engine and reconnect the wiring harness to the new throttle body. Electronic Throttle Manual Matching: Most modern engines use electronic throttle bodies, and the matching method differs from cable-operated ones. After replacing the throttle body, turn on the ignition and listen for the sound of the throttle motor operating. Wait for about a minute until the throttle motor operates again, then start the vehicle. If the vehicle runs normally, the matching is successful.
16
5
Share

Which Toyota models are equipped with V6 engines?

Models equipped with V6 engines include the Toyota Land Cruiser 4.0L, Prado 3.5L, Toyota Reiz 2.5L and 3.0L, and Toyota Crown 2.5L. Below are some key points about V6 engines: 1. The 2.5L V6 naturally aspirated engine (maximum power: 193PS; maximum torque: 236N·m). V6 refers to the number of cylinders and their arrangement, which is in a V-shape, resulting in minimal noise and smooth operation. 2. The 3.0L V6 naturally aspirated engine (maximum power: 227PS; maximum torque: 293N·m). V-type engines have smaller length and height dimensions, making the V6 engine a compact engine design.
8
5
Share

How to Replace the Wiper Blade Rubber on a Frameless Wiper?

Steps to replace the rubber blade on a frameless wiper: 1. Locate the sliding part of the rubber blade, then remove the fixing clip at this end. Needle-nose pliers can be used to assist in the removal. 2. After removing the clip, you will see that the rubber blade to be replaced is fixed to the wiper with a metal buckle. Next, pry up this metal buckle to remove the rubber blade. 3. To install the new wiper rubber blade, simply reverse the above steps. It is particularly important to note that the metal buckle securing the rubber blade must be tightly fixed. Otherwise, the rubber blade may shift during use, affecting its performance.
20
3
Share

What to Do When the Trunk Won't Open with the Remote Key?

The trunk won't open with the remote key. Most vehicle models have a small cover inside the rear trunk. If you use a key or a sharp object, you can easily pry open the outer shell. Once the shell is opened, you will find the trunk's locking mechanism inside. Just give it a gentle pull, and the trunk will open. Here is some additional information about the trunk: 1. The car trunk serves as the vehicle's storage compartment. A trunk mat can effectively protect the trunk, preventing dirt or liquids from entering and damaging the trunk surface, as well as keeping items inside from sliding around. 2. The car trunk helps reduce the likelihood of interior contamination and damage. After all, cleaning a trunk mat is much more convenient and economical than cleaning the interior.
5
5
Share

How to Distinguish Between China 4 and China 5 Emission Standards for Cars?

There are two methods to distinguish: 1. Check the "Automobile Fuel Consumption Label" attached to the new car. 2. Look at the vehicle's nameplate to find the "Vehicle Model," which is a combination of numbers and letters, and also locate the engine model of the new car. Then, log in to the Motor Vehicle Environmental Protection Website, enter the vehicle model and engine model to query. 3. China 5 and China 4 standards are differentiated based on the different emission pollution standards for vehicles. The China 4 emission standard is the national fourth-stage motor vehicle pollutant emission standard. China V is a grade of Beijing's motor vehicle emission standard, formulated and issued by Beijing's environmental protection department, equivalent to the Euro V standard, and was released in 2012.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.