How to use the one-touch window lift function in Lavida?

1 Answers
VonClaire
07/23/25 8:39pm
The method to use the one-touch window lift function in Lavida is to pull up the window control button once. One-touch window lift refers to a system where the car window glass can be controlled to rise or fall into position with a single press. Taking the 2021 Lavida as an example, it belongs to the compact car category with body dimensions of: length 4670mm, width 1806mm, height 1474mm, and a wheelbase of 2688mm. The fuel tank capacity is 51 liters. The 2021 Lavida features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 113ps, maximum power of 83kw, and maximum torque of 145nm, paired with a 5-speed manual transmission.
Was this review help?
17
1
Share
More Forum Discussions

What does 2h4h4l mean for off-road vehicles?

2h4h4l represent two-wheel drive, high-speed four-wheel drive, and low-speed four-wheel drive respectively. 4h4l are two modes available in four-wheel-drive vehicles. 4h is the high-speed four-wheel-drive mode, while 4l is the low-speed four-wheel-drive mode. These two driving modes differ in terms of controlling the transmission system. Properly utilizing the four-wheel-drive modes according to terrain not only enhances the vehicle's off-road capability but also helps reduce fuel consumption to some extent. Relevant details are as follows: If driving on snowy or muddy roads, using the 4h mode is particularly suitable, as it ensures adequate traction while preventing excessive power that could cause wheel slippage. Due to its high power output, the 4l mode is not suitable for such conditions. However, when encountering uphill roads or off-road situations, the 4l mode can be used to maximize the vehicle's power. High-speed four-wheel drive is not suitable for highway driving. For part-time four-wheel-drive vehicles, the 4h and 4l modes should not be used on dry paved roads; only the 2h mode should be selected.
18
4
Share

How to Lift the Octavia Wiper Blades Up?

The method to lift the Octavia wiper blades up involves the following steps: 1. While the Octavia is running, quickly turn the ignition key off and immediately flick the wiper switch once. 2. The wipers will then move to the middle of the windshield, allowing you to manually lift them up and lay them flat. Additional Information: The purpose of lifting the wiper blades up is: 1. To protect the wiper blades. In summer, extreme heat can raise the surface temperature of the car's front windshield to 50 degrees Celsius. The rubber material of standard wiper blades can deform under prolonged exposure to sunlight, eventually losing their effectiveness in clearing rainwater. Therefore, lifting the wiper blades up helps prevent the rubber from deforming. 2. To prevent adhesion. Many roadside trees secrete sap, especially when parked under them. The sap can drop onto the car and stick to the rubber strips of the wiper blades, creating residues that can transfer to the windshield. This can lead to difficulties in cleaning and even obstruct the driver's view.
15
1
Share

How many types of engines does the Teramont use?

The Teramont is equipped with a total of three types of engines. Below are the detailed specifications of the Teramont's engines: 1. The Teramont is powered by a low-power version of the 2.0-liter turbocharged engine, a high-power version of the 2.0-liter turbocharged engine, and a 2.5-liter turbocharged engine. 2. The low-power version of the 2.0-liter turbocharged engine in the Teramont has a maximum power output of 137 kW and a maximum torque of 320 Nm. This engine reaches its maximum power at 4,100 to 6,000 rpm and its maximum torque at 1,500 to 4,000 rpm. 3. The high-power version of the 2.0-liter turbocharged engine delivers a maximum power of 162 kW and a maximum torque of 350 Nm. This engine achieves its maximum power at 4,500 to 6,200 rpm and its maximum torque at 1,500 to 4,400 rpm. 4. The 2.5-liter turbocharged engine boasts a maximum power of 220 kW and a maximum torque of 500 Nm. This engine can output its maximum power at 6,000 rpm and its maximum torque between 2,750 and 3,500 rpm.
4
1
Share

What are the reasons for the Volkswagen Sagitar's air conditioning not cooling?

The reasons for the Volkswagen Sagitar's air conditioning not cooling can be summarized into the following 6 points: 1. Lack of refrigerant. Car air conditioning systems typically require refrigerant replenishment every 2-3 years, with most refrigerant loss occurring due to leaks. 2. Damaged air conditioning flap. 3. Dirty condenser requiring radiator cleaning. The condenser's purpose is heat dissipation. When cleaning, first use an air gun to blow away debris, then rinse with a water gun. 4. Faulty air conditioning compressor, throttle valve, or expansion valve. Malfunctions in the expansion or throttle valves directly lead to insufficient cooling. 5. Aged or loose belt. During regular maintenance, 4S shops usually recommend belt replacement. If not replaced, slippage may occur during operation, potentially causing belt breakage, abnormal noise, loss of power assistance, or inadequate cooling. 6. Moisture in the system. The car's air conditioning refrigeration system contains a dryer that absorbs moisture from the refrigerant and prevents excessive moisture from reducing cooling capacity. When the desiccant in the dryer becomes saturated, it can no longer filter out moisture.
2
0
Share

Is the engine of the Hongqi HS5 domestically produced?

The engine of the Hongqi HS5 is domestically produced. The engine model is CA4GC20TD-32. Below are the detailed specifications of the Hongqi HS5 engine: 1. Body dimensions: Length, width, and height are 4760/1970/1700mm respectively, with a wheelbase of 2870mm. 2. Powertrain: The entire lineup is equipped with a 2.0T inline 4-cylinder turbocharged engine, paired with a 6-speed automatic transmission, delivering a maximum power of 165KW and a maximum horsepower of 224PS. 3. Safety features: Standard across all models, including basic ABS, EBD, front and side airbags, as well as traction control system (ASR/TCS), electronic stability program (ESP/DSC), front side airbags, side curtain airbags, tire pressure monitoring, and more. 4. Drivetrain: The higher-end models feature an on-demand four-wheel-drive system. 5. Suspension: The front suspension is a MacPherson strut independent suspension, and the rear suspension is a multi-link independent suspension. The top-tier model also comes with adjustable suspension.
9
1
Share

What Causes the Throttle to Be Hard to Press Down?

This is mainly due to carbon buildup in areas such as the engine and throttle. When the car is cold, the carbon deposits make the throttle feel stiff, causing the throttle cable to not pull smoothly when pressed. As a result, it feels very hard, and a slight extra force may cause it to go too far. Below are some car maintenance tips: 1. Clean the car promptly: When driving or parked, the car easily accumulates dust and particles, especially after rain. The acidic substances in rainwater can corrode the car's paint over time, making it lose its shine or even fade. 2. Check and change the engine oil regularly: The normal operation of the car engine and other components relies on the lubrication and cleaning functions of the oil. Therefore, check the oil dipstick regularly to ensure the oil level is normal. Generally, new cars should have their oil changed every 5,000 kilometers, and the oil filter should be replaced if it is dirty. 3. Regularly check the levels of coolant, brake fluid, and windshield washer fluid: Coolant ensures the car runs normally in winter and prevents freezing. Brake fluid is essential for the braking system. Windshield washer fluid is used to clean the windshield. Ensuring these fluids are sufficient keeps the car running smoothly. 4. Pay attention to air purification inside the car: New cars need air purification to eliminate odors and reduce toxic gases like formaldehyde. Besides opening windows for ventilation, use air purifiers without secondary pollution for long-lasting effects. Regular maintenance can also include odor removal, such as eliminating smoke or exhaust smells. 5. Perform wheel alignment periodically: High mileage can sometimes cause the car to pull to one side, which may hide potential hazards. Timely wheel alignment can correct this issue. Even if there is no pulling, regular wheel alignment is beneficial. 6. Frequently check tire pressure: Proper tire pressure ensures stable driving. Overinflated tires increase the risk of a blowout and reduce comfort, while underinflated tires increase fuel consumption and tire wear. It’s best to keep a tire pressure gauge handy for regular checks. 7. Inspect wiring periodically: The car's normal operation depends heavily on wiring, including lights and ignition systems. Regularly check for aging or poor contact in wiring and repair it promptly to eliminate safety hazards.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.